[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: Re: [PATCH 5/5] arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts
From: Marc Zyngier <marc.zyngier () arm ! com>
Date: 2019-02-23 19:21:00
Message-ID: 86wolq8g6b.wl-marc.zyngier () arm ! com
[Download RAW message or body]
On Fri, 22 Feb 2019 14:53:56 +0000,
Miquel Raynal <miquel.raynal@bootlin.com> wrote:
>
> From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
>
> There are two SATA ports per CP110. Each of them has a dedicated
> interrupt. Describe the real hardware by adding two SATA ports to the
> CP110 SATA node and enabling them in all the DTs including it
> (7040-db/8040-db/8040-clearfog).
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> arch/arm64/boot/dts/marvell/armada-7040-db.dts | 7 ++++++-
> arch/arm64/boot/dts/marvell/armada-8040-db.dts | 14 ++++++++++++--
> arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 16 ++++++++++++++--
> 3 files changed, 32 insertions(+), 5 deletions(-)
>
[...]
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi \
> b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index b9d9f31e3ba1..f27edddcacd1 \
> 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
> @@ -292,10 +292,22 @@
> "generic-ahci";
> reg = <0x540000 0x30000>;
> dma-coherent;
> - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&CP110_LABEL(clk) 1 15>,
> <&CP110_LABEL(clk) 1 16>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sata-port@0 {
> + reg = <0>;
> + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
Where has this change to the binding been documented?
> + status = "disabled";
> + };
> +
> + sata-port@1 {
> + reg = <1>;
> + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> };
>
> CP110_LABEL(xor0): xor@6a0000 {
> --
> 2.19.1
>
Thanks,
M.
--
Jazz is not dead, it just smell funny.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic