[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: Re: [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback
From: Kishon Vijay Abraham I <kishon () ti ! com>
Date: 2018-01-17 5:31:31
Message-ID: 497d4542-75a7-fbe4-4ff2-07fe00380d0c () ti ! com
[Download RAW message or body]
On Friday 12 January 2018 07:01 AM, Florian Fainelli wrote:
> Implement the calibration callback to allow turning on the Clock-Data
> Recovery module clamping when necessary, e.g: during failure to identify
> a SATA hard drive from ahci_brcm.c::brcm_ahci_read_id.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/phy/broadcom/phy-brcm-sata.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
> index 3f953db70288..8000ce312d95 100644
> --- a/drivers/phy/broadcom/phy-brcm-sata.c
> +++ b/drivers/phy/broadcom/phy-brcm-sata.c
> @@ -150,6 +150,9 @@ enum sata_phy_regs {
> TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff,
> TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84,
> TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
> +
> + RXPMD_REG_BANK = 0x1c0,
> + RXPMD_RX_FREQ_MON_CONTROL1 = 0x87,
> };
>
> enum sata_phy_ctrl_regs {
> @@ -505,8 +508,37 @@ static int brcm_sata_phy_init(struct phy *phy)
> return rc;
> }
>
> +static void brcm_stb_sata_calibrate(struct brcm_sata_port *port)
> +{
> + void __iomem *base = brcm_sata_pcb_base(port);
> + struct brcm_sata_phy *priv = port->phy_priv;
> + u32 tmp = BIT(8);
> +
> + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
> + ~tmp, tmp);
> +}
> +
> +static int brcm_sata_phy_calibrate(struct phy *phy)
> +{
> + struct brcm_sata_port *port = phy_get_drvdata(phy);
> + int rc = -EOPNOTSUPP;
> +
> + switch (port->phy_priv->version) {
> + case BRCM_SATA_PHY_STB_28NM:
> + case BRCM_SATA_PHY_STB_40NM:
> + brcm_stb_sata_calibrate(port);
> + rc = 0;
> + break;
> + default:
> + break;
> + };
> +
> + return rc;
> +}
> +
> static const struct phy_ops phy_ops = {
> .init = brcm_sata_phy_init,
> + .calibrate = brcm_sata_phy_calibrate,
> .owner = THIS_MODULE,
> };
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic