[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: Re: [v2,1/3] ata: ahci_tegra: add support for tegra210
From: Mikko Perttunen <cyndis () kapsi ! fi>
Date: 2016-12-21 9:02:26
Message-ID: 70930ea8-dc92-6a59-aa02-a7a05fc34742 () kapsi ! fi
[Download RAW message or body]
On 21.12.2016 10:50, Preetham Chandru wrote:
> ...
> >
> > Perhaps the "-sata-" should be removed from these - I believe the supply
> > name here should refer to the usage of the supplied power within the IP
> > block. The IP block here is SATA so it is clear that it is used for something
> > SATA related. If someone is better informed, please comment.
> >
> > It also looks like this doesn't include the 5V and 12V supplies which had to
> > be enabled on the Jetson TK1 to enable power output through the Molex
> > connector - do you know if the Jetson TX1 no longer needs similar to enable
> > the SATA power connector?
> >
>
> We need to keep regulator name matching with pin name. The regulatory framework and \
> policy suggests that regulator name should match the pin name. So I have named it \
> accordingly. The 5V and 12V does not seem to be required for tx1. I will take a \
> closer look at it and if required I will push another patch for it.
Ok, that makes sense; sounds good to me.
Thanks,
Mikko.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic