[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: Re: [PATCH] ata: sata_rcar: Add DIPM mode disabling workaround
From: Simon Horman <horms () verge ! net ! au>
Date: 2014-10-24 4:15:55
Message-ID: 20141024041555.GB11281 () verge ! net ! au
[Download RAW message or body]
On Fri, Oct 10, 2014 at 02:04:34PM +0400, Sergei Shtylyov wrote:
> Hello.
>
> On 10/10/2014 12:45 PM, Yoshihiro Kaneko wrote:
>
> >From: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
>
> >This workaround must be applied to R8A7790(H2) ES1
>
> >Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
> >Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
For the record, this patch has been superseded by
"ata: sata_rcar: Disable DIPM mode for r8a7790 ES1".
> >---
>
> >This patch is against for-next branch of Tejun's libata repo.
>
> > drivers/ata/sata_rcar.c | 25 +++++++++++++++++++++++--
> > 1 file changed, 23 insertions(+), 2 deletions(-)
> >
> >diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> >index 61eb6d7..0ba5974 100644
> >--- a/drivers/ata/sata_rcar.c
> >+++ b/drivers/ata/sata_rcar.c
> >@@ -143,6 +143,11 @@
> > #define RCAR_GEN2_PHY_CTL5_DC BIT(1) /* DC connection */
> > #define RCAR_GEN2_PHY_CTL5_TR BIT(2) /* Termination Resistor */
> >
> >+/* Product Register */
> >+#define PRODUCT_REGISTER 0xFF000044
> >+#define PRODUCT_CUT_MASK 0x00007FF0
> >+#define PRODUCT_H2_BIT (0x45 << 8)
>
> Why _BIT? And why not 0x00004500?
>
> >@@ -751,18 +756,30 @@ done:
> > return IRQ_RETVAL(handled);
> > }
> >
> >-static void sata_rcar_setup_port(struct ata_host *host)
> >+static int sata_rcar_setup_port(struct ata_host *host)
> > {
> > struct ata_port *ap = host->ports[0];
> > struct ata_ioports *ioaddr = &ap->ioaddr;
> > struct sata_rcar_priv *priv = host->private_data;
> > void __iomem *base = priv->base;
> >+ void __iomem *product_reg;
> >
> > ap->ops = &sata_rcar_port_ops;
> > ap->pio_mask = ATA_PIO4;
> > ap->udma_mask = ATA_UDMA6;
> > ap->flags |= ATA_FLAG_SATA;
> >
> >+ product_reg = ioremap_nocache(PRODUCT_REGISTER, 0x04);
>
> Don't we need some platform function to read that register instead? It's
> not specific to SATA, AFAICT.
>
> >+ if (!product_reg) {
> >+ dev_warn(host->dev, "ioremap fail\n");
>
> s/fail/failed/.
>
> >+ return -ENOMEM;
> >+ }
> >+ /* Add the workaround of DIPM mode disabling in R-Car H2 ES1.x.*/
>
> Please add space before */
>
> [...]
>
> WBR, Sergei
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic