[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: Re: [PATCH] ahci: add DT binding for Calxeda AHCI controller
From: Rob Herring <robherring2 () gmail ! com>
Date: 2011-10-24 14:20:07
Message-ID: 4EA57417.8060709 () gmail ! com
[Download RAW message or body]
Jeff,
On 10/03/2011 09:30 PM, Rob Herring wrote:
> On 09/02/2011 10:10 AM, Rob Herring wrote:
> > From: Rob Herring <rob.herring@calxeda.com>
> >
> > Add devicetree match table to ahci platform driver for Calxeda Highbank
> > AHCI controller.
> >
> > Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> > Cc: Jeff Garzik <jgarzik@pobox.com>
> > Cc: linux-ide@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: devicetree-discuss@lists.ozlabs.org
> > ---
>
> Any comments on this?
>
Ping.
Can you please apply this for 3.2.
Regards,
Rob
> > .../devicetree/bindings/ata/calxeda-sata.txt | 17 +++++++++++++++++
> > drivers/ata/ahci_platform.c | 7 +++++++
> > 2 files changed, 24 insertions(+), 0 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/ata/calxeda-sata.txt
> >
> > diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt \
> > b/Documentation/devicetree/bindings/ata/calxeda-sata.txt new file mode 100644
> > index 0000000..79caa56
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
> > @@ -0,0 +1,17 @@
> > +* Calxeda SATA Controller
> > +
> > +SATA nodes are defined to describe on-chip Serial ATA controllers.
> > +Each SATA controller should have its own node.
> > +
> > +Required properties:
> > +- compatible : compatible list, contains "calxeda,hb-ahci"
> > +- interrupts : <interrupt mapping for SATA IRQ>
> > +- reg : <registers mapping>
> > +
> > +Example:
> > + sata@ffe08000 {
> > + compatible = "calxeda,hb-ahci";
> > + reg = <0xffe08000 0x1000>;
> > + interrupts = <115>;
> > + };
> > +
> > diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> > index 6fef1fa..9bfc970 100644
> > --- a/drivers/ata/ahci_platform.c
> > +++ b/drivers/ata/ahci_platform.c
> > @@ -171,11 +171,18 @@ static int __devexit ahci_remove(struct platform_device \
> > *pdev) return 0;
> > }
> >
> > +static const struct of_device_id ahci_of_match[] = {
> > + { .compatible = "calxeda,hb-ahci", },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, ahci_of_match);
> > +
> > static struct platform_driver ahci_driver = {
> > .remove = __devexit_p(ahci_remove),
> > .driver = {
> > .name = "ahci",
> > .owner = THIS_MODULE,
> > + .of_match_table = ahci_of_match,
> > },
> > };
> >
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic