[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: [PATCH 4/8] MIPS: au1xxx: au1xxx-ide: remove pb1200/db1200 header dep
From: Manuel Lauss <manuel.lauss () googlemail ! com>
Date: 2011-08-12 9:39:41
Message-ID: 1313141985-5830-5-git-send-email-manuel.lauss () googlemail ! com
[Download RAW message or body]
au1xxx-ide uses defines from the pb1200/db1200 headers:
get DBDMA ID through platform resource information,
hardcode register spacing. The only 2 users of this driver (and
the only boards it can really work on realiably) use the same
register layout.
Cc: linux-ide@vger.kernel.org
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
---
I'd like for this to go through the MIPS tree, as other changes in it
depend on it.
arch/mips/alchemy/devboards/db1200/platform.c | 7 +++-
arch/mips/alchemy/devboards/pb1200/platform.c | 8 ++++-
arch/mips/include/asm/mach-au1x00/au1xxx_ide.h | 1 +
arch/mips/include/asm/mach-db1x00/db1200.h | 2 -
arch/mips/include/asm/mach-pb1x00/pb1200.h | 2 -
drivers/ide/au1xxx-ide.c | 44 ++++++++++++++----------
6 files changed, 40 insertions(+), 24 deletions(-)
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c \
b/arch/mips/alchemy/devboards/db1200/platform.c index 95c7327..6fd070d 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -213,7 +213,12 @@ static struct resource db1200_ide_res[] = {
.start = DB1200_IDE_INT,
.end = DB1200_IDE_INT,
.flags = IORESOURCE_IRQ,
- }
+ },
+ [2] = {
+ .start = DSCR_CMD0_DMA_REQ1,
+ .end = DSCR_CMD0_DMA_REQ1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 ide_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c \
b/arch/mips/alchemy/devboards/pb1200/platform.c index c52809d..6ac0494 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
@@ -26,6 +26,7 @@
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
@@ -115,7 +116,12 @@ static struct resource ide_resources[] = {
.start = IDE_INT,
.end = IDE_INT,
.flags = IORESOURCE_IRQ
- }
+ },
+ [2] = {
+ .start = DSCR_CMD0_DMA_REQ1,
+ .end = DSCR_CMD0_DMA_REQ1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 ide_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h \
b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h index 5656c72..e306384 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -58,6 +58,7 @@ typedef struct {
#endif
int irq;
u32 regbase;
+ int ddma_id;
} _auide_hwif;
/******************************************************************************/
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h \
b/arch/mips/include/asm/mach-db1x00/db1200.h index 3404248..7a39657 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -46,8 +46,6 @@
#define IDE_PHYS_ADDR 0x18800000
#define IDE_REG_SHIFT 5
-#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE 128
#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR
#define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h \
b/arch/mips/include/asm/mach-pb1x00/pb1200.h index 0ecff1c..56865e9 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -76,8 +76,6 @@
#define IDE_REG_SHIFT 5
#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
#define IDE_INT PB1200_IDE_INT
-#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE 128
#define NAND_PHYS_ADDR 0x1C000000
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index b26c234..c778373 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -43,6 +43,10 @@
#define DRV_NAME "au1200-ide"
#define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov \
<ppopov@embeddedalley.com>"
+#ifndef IDE_REG_SHIFT
+#define IDE_REG_SHIFT 5
+#endif
+
/* enable the burstmode in the dbdma */
#define IDE_AU1XXX_BURSTMODE 1
@@ -317,10 +321,11 @@ static void auide_ddma_rx_callback(int irq, void *param)
}
#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
-static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 \
devwidth, u32 flags) +static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, \
u32 tsize, + u32 devwidth, u32 flags, u32 regbase)
{
dev->dev_id = dev_id;
- dev->dev_physaddr = (u32)IDE_PHYS_ADDR;
+ dev->dev_physaddr = CPHYSADDR(regbase);
dev->dev_intlevel = 0;
dev->dev_intpolarity = 0;
dev->dev_tsize = tsize;
@@ -344,7 +349,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct \
ide_port_info *d) dbdev_tab_t source_dev_tab, target_dev_tab;
u32 dev_id, tsize, devwidth, flags;
- dev_id = IDE_DDMA_REQ;
+ dev_id = hwif->ddma_id;
tsize = 8; /* 1 */
devwidth = 32; /* 16 */
@@ -356,20 +361,17 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct \
ide_port_info *d) #endif
/* setup dev_tab for tx channel */
- auide_init_dbdma_dev( &source_dev_tab,
- dev_id,
- tsize, devwidth, DEV_FLAGS_OUT | flags);
+ auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+ DEV_FLAGS_OUT | flags, auide->regbase);
auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
- auide_init_dbdma_dev( &source_dev_tab,
- dev_id,
- tsize, devwidth, DEV_FLAGS_IN | flags);
+ auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+ DEV_FLAGS_IN | flags, auide->regbase);
auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
/* We also need to add a target device for the DMA */
- auide_init_dbdma_dev( &target_dev_tab,
- (u32)DSCR_CMD0_ALWAYS,
- tsize, devwidth, DEV_FLAGS_ANYUSE);
+ auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize,
+ devwidth, DEV_FLAGS_ANYUSE, auide->regbase);
auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);
/* Get a channel for TX */
@@ -411,14 +413,12 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct \
ide_port_info *d) #endif
/* setup dev_tab for tx channel */
- auide_init_dbdma_dev( &source_dev_tab,
- (u32)DSCR_CMD0_ALWAYS,
- 8, 32, DEV_FLAGS_OUT | flags);
+ auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+ DEV_FLAGS_OUT | flags, auide->regbase);
auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
- auide_init_dbdma_dev( &source_dev_tab,
- (u32)DSCR_CMD0_ALWAYS,
- 8, 32, DEV_FLAGS_IN | flags);
+ auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+ DEV_FLAGS_IN | flags, auide->regbase);
auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
/* Get a channel for TX */
@@ -540,6 +540,14 @@ static int au_ide_probe(struct platform_device *dev)
goto out;
}
+ res = platform_get_resource(dev, IORESOURCE_DMA, 0);
+ if (!res) {
+ pr_debug("%s: no DDMA ID resource\n", DRV_NAME);
+ ret = -ENODEV;
+ goto out;
+ }
+ ahwif->ddma_id = res->start;
+
memset(&hw, 0, sizeof(hw));
auide_setup_ports(&hw, ahwif);
hw.irq = ahwif->irq;
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic