[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: hald-addon-storage causing ata soft resets on CDROM drive?
From: Török Edwin <edwintorok () gmail ! com>
Date: 2010-06-27 20:23:47
Message-ID: 20100627232347.2f1dc4fd () debian
[Download RAW message or body]
Hi,
Using 2.6.35-rc3 I noticed this in my dmesg (see end of email for full dmesg output)
[28144.351747] ata9: drained 65536 bytes to clear DRQ.
[28144.460834] ata9.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[28144.460838] sr 8:0:1:0: CDB: Prevent/Allow Medium Removal: 1e 00 00
00 00 00 [28144.460846] ata9.01: cmd
a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 [28144.460846] res
7f/7f:7f:7f:7f:7f/00:00:00:00:00/7f Emask 0x3 (HSM violation)
[28144.460849] ata9.01: status: { DRDY DF DRQ ERR } [28144.460867]
ata9: soft resetting link
....
[32977.433092] ata9: EH complete
ata9 is one my CDROM drives:
[ 0.589989] scsi9 : pata_jmicron
[ 0.590574] ata9: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma
0xb400 irq 19
....
[ 0.753081] ata9.00: ATAPI: ASUS CRW-5232AS, 1.01, max UDMA/33
[ 0.753109] ata9.01: ATAPI: SAMSUNG CD-ROM SH-152A, C503, max UDMA/33
[ 0.760661] ata9.00: configured for UDMA/33
[ 0.776533] ata9.01: configured for UDMA/33
I certainly haven't touched the CDROM drive today so this looked
suspicious. Apparently hald-addon-storage is causing this:
[32880.588540] INFO: task hald-addon-stor:6113 blocked for more than 120 seconds.
[32880.588543] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this \
message. [32880.588546] hald-addon-st D 0000000000000002 0 6113 5949 \
0x00000080 [32880.588551] ffff880122a21af8 0000000000000086 0000000000013d00 \
0000000000000000 [32880.588555] ffff880122a21fd8 ffff880122b161c0 ffff880122a21fd8 \
ffff880122a20000 [32880.588559] ffff880122a20000 ffff880122a21fd8 ffff880122a20000 \
ffff880122a21fd8 [32880.588563] Call Trace:
[32880.588570] [<ffffffff812d2715>] scsi_block_when_processing_errors+0x91/0xc2
[32880.588575] [<ffffffff810539c5>] ? autoremove_wake_function+0x0/0x34
[32880.588579] [<ffffffff812303a7>] ? get_disk+0xd9/0xfd
[32880.588593] [<ffffffffa0096301>] sr_open+0x11/0x1b [sr_mod]
[32880.588599] [<ffffffffa0089086>] cdrom_open+0x4d/0x46b [cdrom]
[32880.588603] [<ffffffff812bed32>] ? kobj_lookup+0x1c0/0x1fb
[32880.588607] [<ffffffff8123b3dc>] ? kobject_get+0x1a/0x22
[32880.588616] [<ffffffffa009649b>] sr_block_open+0x8b/0xa8 [sr_mod]
[32880.588619] [<ffffffff812b956b>] ? get_device+0x14/0x1a
[32880.588623] [<ffffffff8110c0a4>] __blkdev_get+0xda/0x391
[32880.588625] [<ffffffff8110c366>] blkdev_get+0xb/0xd
[32880.588628] [<ffffffff8110c40f>] blkdev_open+0xa7/0xe6
[32880.588630] [<ffffffff8110c368>] ? blkdev_open+0x0/0xe6
[32880.588633] [<ffffffff810e2f42>] __dentry_open+0x1ce/0x2fd
[32880.588635] [<ffffffff810e3136>] nameidata_to_filp+0x3a/0x4b
[32880.588638] [<ffffffff810eea66>] do_last+0x4e5/0x64b
[32880.588640] [<ffffffff810f082b>] do_filp_open+0x202/0x641
[32880.588642] [<ffffffff8123b2b3>] ? kobject_put+0x47/0x4b
[32880.588645] [<ffffffff810f96c8>] ? alloc_fd+0x111/0x123
[32880.588647] [<ffffffff810e2c8b>] do_sys_open+0x5e/0x10a
[32880.588649] [<ffffffff810e2d60>] sys_open+0x1b/0x1d
[32880.588652] [<ffffffff810029ab>] system_call_fastpath+0x16/0x1b
Googling showed me some issues with dieing hard drives (not the case here), and some \
issues with CDROM drives, but for old kernels (2.6.20 or so). So I thought to report \
this here.
Is there anything I should do next time I see this in my dmesg?
I don't have a way to reproduce this (other than waiting for it to happen again), \
apparently the system just finished running the hourly cronjob when this happened \
first time so it was mostly idle:
Jun 27 18:17:01 debian /USR/SBIN/CRON[27750]: (root) CMD ( cd / && run-parts \
--report /etc/cron.hourly)
Jun 27 18:19:45 debian kernel: [28144.351747] ata9: drained 65536 bytes to clear DRQ.
Jun 27 18:19:45 debian kernel: [28144.460834] ata9.01: exception Emask 0x0 SAct 0x0 \
SErr 0x0 action 0x6
...
And finished another cronjob when it happened again:
Jun 27 19:17:01 debian /USR/SBIN/CRON[29767]: (root) CMD ( cd / && run-parts \
--report /etc/cron.hourly)
Jun 27 19:25:01 debian /USR/SBIN/CRON[29868]: (root) CMD (command -v debian-sa1 > \
/dev/null && debian-sa1 1 1)
Jun 27 19:31:15 debian smartd[6274]: Device: /dev/sdc [SAT], SMART Usage Attribute: \
194 Temperature_Celsius changed from 114 to 115
Jun 27 19:31:51 debian kernel: [32470.355768] ata9: drained 65536 bytes to clear DRQ.
Jun 27 19:31:51 debian kernel: [32470.464499] ata9.01: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x6
Actually this happened 5 times already, I don't know exactly what triggered/triggers \
it (but looks like something to do with hal): [28144.351747] ata9: drained 65536 \
bytes to clear DRQ. [28200.351742] ata9: drained 65536 bytes to clear DRQ.
[28226.352017] ata9: drained 65536 bytes to clear DRQ.
[32470.355768] ata9: drained 65536 bytes to clear DRQ.
[32709.352741] ata9: drained 65536 bytes to clear DRQ.
My full dmesg is below:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-rc3-00001-ga5d1880 (edwin@debian) (gcc version \
4.4.4 (Debian 4.4.4-5) ) #80 SMP PREEMPT Thu Jun 24 20:47:24 EEST 2010 [ 0.000000] \
Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3-00001-ga5d1880 \
root=UUID=ed5c3d95-ed38-4262-b051-a8079f07ad8b ro quiet [ 0.000000] BIOS-provided \
physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 \
(usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> \
(reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 \
(usable) [ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 130000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> \
(reserved) [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> \
(reserved) [ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009d400 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 16000-1c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 1a000-20000
[ 0.000000] RAMDISK: 37b37000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7050 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU \
01010101) [ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI \
42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee3180 04C26 (v01 GBT \
GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: HPET 00000000cfee7f00 00038 (v01 GBT GBTUACPI 42302E31 GBTU \
00000098) [ 0.000000] ACPI: MCFG 00000000cfee7f80 0003C (v01 GBT GBTUACPI \
42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee7e00 00084 (v01 GBT \
GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cfee88e0 003AB \
(v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address \
0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> \
[ffff880006600000-ffff880009ffffff] on node 0 [ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048173
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3925 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1b000 - 1b7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 \
nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880005e00000 s84160 \
r8192 d22336 u524288 [ 0.000000] pcpu-alloc: s84160 r8192 d22336 u524288 \
alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: \
1031149 [ 0.000000] Kernel command line: \
BOOT_IMAGE=/boot/vmlinuz-2.6.35-rc3-00001-ga5d1880 \
root=UUID=ed5c3d95-ed38-4262-b051-a8079f07ad8b ro quiet [ 0.000000] PID hash table \
entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: \
524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: \
262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] early_res array is doubled to 128 at [23800 - 247ff]
[ 0.000000] Subtract (57 early reservations)
[ 0.000000] #1 [0001000000 - 0005cd12a8] TEXT DATA BSS
[ 0.000000] #2 [0037b37000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [000009d400 - 0000100000] BIOS reserved
[ 0.000000] #4 [0005cd2000 - 0005cd20f6] BRK
[ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #7 [0000016000 - 000001a000] PGTABLE
[ 0.000000] #8 [000001a000 - 000001b000] PGTABLE
[ 0.000000] #9 [0005cd2100 - 0005cd3100] BOOTMEM
[ 0.000000] #10 [0005cd12c0 - 0005cd15c0] BOOTMEM
[ 0.000000] #11 [00064d4000 - 00064d5000] BOOTMEM
[ 0.000000] #12 [00064d5000 - 00064d6000] BOOTMEM
[ 0.000000] #13 [0006600000 - 000a000000] MEMMAP 0
[ 0.000000] #14 [0005cd15c0 - 0005cd1740] BOOTMEM
[ 0.000000] #15 [0005cd3100 - 0005ceb100] BOOTMEM
[ 0.000000] #16 [0005ceb100 - 0005cf1100] BOOTMEM
[ 0.000000] #17 [0005cf2000 - 0005cf3000] BOOTMEM
[ 0.000000] #18 [0005cd1740 - 0005cd1781] BOOTMEM
[ 0.000000] #19 [0005cd17c0 - 0005cd1803] BOOTMEM
[ 0.000000] #20 [0005cd1840 - 0005cd1aa8] BOOTMEM
[ 0.000000] #21 [0005cd1ac0 - 0005cd1b28] BOOTMEM
[ 0.000000] #22 [0005cd1b40 - 0005cd1ba8] BOOTMEM
[ 0.000000] #23 [0005cd1bc0 - 0005cd1c28] BOOTMEM
[ 0.000000] #24 [0005cd1c40 - 0005cd1ca8] BOOTMEM
[ 0.000000] #25 [0005cd1cc0 - 0005cd1d28] BOOTMEM
[ 0.000000] #26 [0005cd1d40 - 0005cd1da8] BOOTMEM
[ 0.000000] #27 [0005cd1dc0 - 0005cd1e28] BOOTMEM
[ 0.000000] #28 [0005cd1e40 - 0005cd1ea8] BOOTMEM
[ 0.000000] #29 [0005cd1ec0 - 0005cd1f28] BOOTMEM
[ 0.000000] #30 [0005cd1f40 - 0005cd1fa8] BOOTMEM
[ 0.000000] #31 [0005cd1fc0 - 0005cd1fe0] BOOTMEM
[ 0.000000] #32 [0005cf1100 - 0005cf1120] BOOTMEM
[ 0.000000] #33 [0005cf1140 - 0005cf11ab] BOOTMEM
[ 0.000000] #34 [0005cf11c0 - 0005cf122b] BOOTMEM
[ 0.000000] #35 [0005e00000 - 0005e1c000] BOOTMEM
[ 0.000000] #36 [0005e80000 - 0005e9c000] BOOTMEM
[ 0.000000] #37 [0005f00000 - 0005f1c000] BOOTMEM
[ 0.000000] #38 [0005f80000 - 0005f9c000] BOOTMEM
[ 0.000000] #39 [0005cf1240 - 0005cf1248] BOOTMEM
[ 0.000000] #40 [0005cf1280 - 0005cf1288] BOOTMEM
[ 0.000000] #41 [0005cf12c0 - 0005cf12d0] BOOTMEM
[ 0.000000] #42 [0005cf1300 - 0005cf1320] BOOTMEM
[ 0.000000] #43 [0005cf1340 - 0005cf1470] BOOTMEM
[ 0.000000] #44 [0005cf1480 - 0005cf14d0] BOOTMEM
[ 0.000000] #45 [0005cf1500 - 0005cf1550] BOOTMEM
[ 0.000000] #46 [0005cf1580 - 0005cf1780] BOOTMEM
[ 0.000000] #47 [0005cf1780 - 0005cf1980] BOOTMEM
[ 0.000000] #48 [0005cf1980 - 0005cf1b80] BOOTMEM
[ 0.000000] #49 [0005cf1b80 - 0005cf1d80] BOOTMEM
[ 0.000000] #50 [0005cf3000 - 0005cfb000] BOOTMEM
[ 0.000000] #51 [0005f9c000 - 000639c000] BOOTMEM
[ 0.000000] #52 [000a000000 - 000a200000] BOOTMEM
[ 0.000000] #53 [000a200000 - 000e200000] BOOTMEM
[ 0.000000] #54 [0005cfb000 - 0005d1b000] BOOTMEM
[ 0.000000] #55 [0005d1b000 - 0005d5b000] BOOTMEM
[ 0.000000] #56 [000001b800 - 0000023800] BOOTMEM
[ 0.000000] Memory: 3977036k/4980736k available (3925k kernel code, 788044k \
absent, 215656k reserved, 3690k data, 500k init) [ 0.000000] SLUB: Genslabs=13, \
HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU \
implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2833.025 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer \
frequency.. 5666.05 BogoMIPS (lpj=11332100) [ 0.004008] pid_max: default: 32768 \
minimum: 301 [ 0.004025] Security Framework initialized
[ 0.004033] Mount-cache hash table entries: 256
[ 0.004135] Initializing cgroup subsys ns
[ 0.004138] Initializing cgroup subsys cpuacct
[ 0.004141] Initializing cgroup subsys devices
[ 0.004161] CPU: Physical Processor ID: 0
[ 0.004162] CPU: Processor Core ID: 0
[ 0.004164] mce: CPU supports 6 MCE banks
[ 0.004169] CPU0: Thermal monitoring enabled (TM2)
[ 0.004171] using mwait in idle threads.
[ 0.004173] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.004178] ... version: 2
[ 0.004179] ... bit width: 40
[ 0.004180] ... generic registers: 2
[ 0.004181] ... value mask: 000000ffffffffff
[ 0.004183] ... max period: 000000007fffffff
[ 0.004184] ... fixed-purpose events: 3
[ 0.004185] ... event mask: 0000000700000003
[ 0.004211] ACPI: Core revision 20100428
[ 0.012058] Setting APIC routing to flat
[ 0.012456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052255] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07
[ 0.072017] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.364006] Brought up 4 CPUs
[ 0.364009] Total of 4 processors activated (22663.97 BogoMIPS).
[ 0.366073] devtmpfs: initialized
[ 0.366073] NET: Registered protocol family 16
[ 0.368025] ACPI: bus type pci registered
[ 0.368035] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem \
0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.368035] PCI: MMCONFIG at [mem \
0xe0000000-0xe3ffffff] reserved in E820 [ 0.373062] PCI: Using configuration type \
1 for base access [ 0.376042] bio: create slab <bio-0> at 0
[ 0.376624] ACPI: EC: Look up EC in DSDT
[ 0.383741] ACPI: SSDT 00000000cfee8000 0022A (v01 PmRef Cpu0Ist 00003000 INTL \
20040311) [ 0.383916] ACPI: Dynamic OEM Table Load:
[ 0.383918] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.384122] ACPI: SSDT 00000000cfee84c0 00152 (v01 PmRef Cpu1Ist 00003000 INTL \
20040311) [ 0.384287] ACPI: Dynamic OEM Table Load:
[ 0.384289] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.384474] ACPI: SSDT 00000000cfee8620 00152 (v01 PmRef Cpu2Ist 00003000 INTL \
20040311) [ 0.384639] ACPI: Dynamic OEM Table Load:
[ 0.384641] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.384826] ACPI: SSDT 00000000cfee8780 00152 (v01 PmRef Cpu3Ist 00003000 INTL \
20040311) [ 0.384991] ACPI: Dynamic OEM Table Load:
[ 0.384993] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.385029] ACPI: Interpreter enabled
[ 0.385031] ACPI: (supports S0 S3 S4 S5)
[ 0.385047] ACPI: Using IOAPIC for interrupt routing
[ 0.392274] ACPI: No dock devices found.
[ 0.392274] PCI: Using host bridge windows from ACPI; if necessary, use \
"pci=nocrs" and report a bug [ 0.392274] ACPI: PCI Root Bridge [PCI0] (domain 0000 \
[bus 00-3f]) [ 0.392274] pci_root PNP0A03:00: host bridge window [io \
0x0000-0x0cf7] [ 0.392274] pci_root PNP0A03:00: host bridge window [io \
0x0d00-0xffff] [ 0.392274] pci_root PNP0A03:00: host bridge window [mem \
0x000a0000-0x000bffff] [ 0.392274] pci_root PNP0A03:00: host bridge window [mem \
0x000c0000-0x000dffff] [ 0.392274] pci_root PNP0A03:00: host bridge window [mem \
0xcff00000-0xfebfffff] [ 0.392274] pci 0000:00:01.0: PME# supported from D0 D3hot \
D3cold [ 0.392274] pci 0000:00:01.0: PME# disabled
[ 0.392274] pci 0000:00:1a.0: reg 20: [io 0xe200-0xe21f]
[ 0.392297] pci 0000:00:1a.1: reg 20: [io 0xe000-0xe01f]
[ 0.392348] pci 0000:00:1a.2: reg 20: [io 0xe100-0xe11f]
[ 0.392391] pci 0000:00:1a.7: reg 10: [mem 0xeb305000-0xeb3053ff]
[ 0.392449] pci 0000:00:1b.0: reg 10: [mem 0xeb300000-0xeb303fff 64bit]
[ 0.392481] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.392484] pci 0000:00:1b.0: PME# disabled
[ 0.392534] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.392537] pci 0000:00:1c.0: PME# disabled
[ 0.392589] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.392592] pci 0000:00:1c.2: PME# disabled
[ 0.392643] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.392646] pci 0000:00:1c.3: PME# disabled
[ 0.392697] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.392700] pci 0000:00:1c.4: PME# disabled
[ 0.392751] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.392754] pci 0000:00:1c.5: PME# disabled
[ 0.392795] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.392846] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.392898] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.392941] pci 0000:00:1d.7: reg 10: [mem 0xeb304000-0xeb3043ff]
[ 0.393102] pci 0000:00:1f.2: reg 10: [io 0xe600-0xe607]
[ 0.393106] pci 0000:00:1f.2: reg 14: [io 0xe700-0xe703]
[ 0.393111] pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
[ 0.393115] pci 0000:00:1f.2: reg 1c: [io 0xe900-0xe903]
[ 0.393119] pci 0000:00:1f.2: reg 20: [io 0xea00-0xea1f]
[ 0.393123] pci 0000:00:1f.2: reg 24: [mem 0xeb306000-0xeb3067ff]
[ 0.393148] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.393150] pci 0000:00:1f.2: PME# disabled
[ 0.393171] pci 0000:00:1f.3: reg 10: [mem 0xeb307000-0xeb3070ff 64bit]
[ 0.393181] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.393229] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.393236] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe500ffff 64bit]
[ 0.393240] pci 0000:01:00.0: reg 20: [io 0x9000-0x90ff]
[ 0.393247] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.393261] pci 0000:01:00.0: supports D1 D2
[ 0.393283] pci 0000:01:00.1: reg 10: [mem 0xe5010000-0xe5013fff 64bit]
[ 0.393311] pci 0000:01:00.1: supports D1 D2
[ 0.393322] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.393325] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.393327] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.393330] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit \
pref] [ 0.393361] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.393365] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.393368] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] \
(disabled) [ 0.393372] pci 0000:00:1c.0: bridge window [mem \
0xfff00000-0x000fffff pref] (disabled) [ 0.393439] pci 0000:03:00.0: reg 10: [mem \
0xe7004000-0xe700407f 64bit] [ 0.393453] pci 0000:03:00.0: reg 18: [mem \
0xe7000000-0xe7003fff 64bit] [ 0.393461] pci 0000:03:00.0: reg 20: [io \
0xa000-0xa07f] [ 0.393475] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff \
pref] [ 0.393511] pci 0000:03:00.0: supports D1 D2
[ 0.393529] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.393532] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 0.393535] pci 0000:00:1c.2: bridge window [mem 0xe6000000-0xe7ffffff]
[ 0.393539] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] \
(disabled) [ 0.393605] pci 0000:04:00.0: reg 10: [io 0xb000-0xb007]
[ 0.393613] pci 0000:04:00.0: reg 14: [io 0xb100-0xb103]
[ 0.393620] pci 0000:04:00.0: reg 18: [io 0xb200-0xb207]
[ 0.393628] pci 0000:04:00.0: reg 1c: [io 0xb300-0xb303]
[ 0.393636] pci 0000:04:00.0: reg 20: [io 0xb400-0xb40f]
[ 0.393689] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.393692] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.393695] pci 0000:00:1c.3: bridge window [mem 0xe8000000-0xe8ffffff]
[ 0.393700] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] \
(disabled) [ 0.396010] pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.396027] pci 0000:05:00.0: reg 18: [mem 0xeb010000-0xeb010fff 64bit pref]
[ 0.396039] pci 0000:05:00.0: reg 20: [mem 0xeb000000-0xeb00ffff 64bit pref]
[ 0.396045] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.396080] pci 0000:05:00.0: supports D1 D2
[ 0.396082] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.396086] pci 0000:05:00.0: PME# disabled
[ 0.396109] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.396117] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.396125] pci 0000:00:1c.4: bridge window [mem 0xe9000000-0xe9ffffff]
[ 0.396130] pci 0000:00:1c.4: bridge window [mem 0xeb000000-0xeb0fffff 64bit \
pref] [ 0.396188] pci 0000:06:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.396206] pci 0000:06:00.0: reg 18: [mem 0xeb110000-0xeb110fff 64bit pref]
[ 0.396218] pci 0000:06:00.0: reg 20: [mem 0xeb100000-0xeb10ffff 64bit pref]
[ 0.396225] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.396261] pci 0000:06:00.0: supports D1 D2
[ 0.396262] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.396266] pci 0000:06:00.0: PME# disabled
[ 0.396289] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.396292] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.396295] pci 0000:00:1c.5: bridge window [mem 0xea000000-0xeaffffff]
[ 0.396299] pci 0000:00:1c.5: bridge window [mem 0xeb100000-0xeb1fffff 64bit \
pref] [ 0.396342] pci 0000:07:07.0: reg 10: [mem 0xeb204000-0xeb2047ff]
[ 0.396348] pci 0000:07:07.0: reg 14: [mem 0xeb200000-0xeb203fff]
[ 0.396384] pci 0000:07:07.0: supports D1 D2
[ 0.396385] pci 0000:07:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.396388] pci 0000:07:07.0: PME# disabled
[ 0.396419] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.396422] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.396425] pci 0000:00:1e.0: bridge window [mem 0xeb200000-0xeb2fffff]
[ 0.396429] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] \
(disabled) [ 0.396431] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] \
(subtractive decode) [ 0.396433] pci 0000:00:1e.0: bridge window [io \
0x0d00-0xffff] (subtractive decode) [ 0.396435] pci 0000:00:1e.0: bridge window \
[mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.396437] pci 0000:00:1e.0: \
bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.396439] pci \
0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ \
0.396461] pci_bus 0000:00: on NUMA node 0 [ 0.396464] ACPI: PCI Interrupt Routing \
Table [\_SB_.PCI0._PRT] [ 0.396573] ACPI: PCI Interrupt Routing Table \
[\_SB_.PCI0.PEX0._PRT] [ 0.396614] ACPI: PCI Interrupt Routing Table \
[\_SB_.PCI0.PEX2._PRT] [ 0.396653] ACPI: PCI Interrupt Routing Table \
[\_SB_.PCI0.PEX3._PRT] [ 0.396701] ACPI: PCI Interrupt Routing Table \
[\_SB_.PCI0.PEX4._PRT] [ 0.396740] ACPI: PCI Interrupt Routing Table \
[\_SB_.PCI0.PEX5._PRT] [ 0.396780] ACPI: PCI Interrupt Routing Table \
[\_SB_.PCI0.HUB0._PRT] [ 0.412104] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 \
9 10 11 *12 14 15) [ 0.412135] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 \
*10 11 12 14 15) [ 0.412207] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 \
*11 12 14 15) [ 0.412278] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 \
12 14 *15) [ 0.412348] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 \
14 15) *0, disabled. [ 0.412420] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 \
9 10 11 12 14 15) [ 0.412490] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 \
11 12 *14 15) [ 0.412561] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 \
12 14 15) [ 0.412601] HEST: Table is not found!
[ 0.412601] vgaarb: device added: \
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.412601] vgaarb: loaded
[ 0.412601] SCSI subsystem initialized
[ 0.412601] libata version 3.00 loaded.
[ 0.412601] PCI: Using ACPI for IRQ routing
[ 0.412601] PCI: pci_cache_line_size set to 64 bytes
[ 0.412601] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 0.412601] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[ 0.412601] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.412601] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.412601] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.424020] Switching to clocksource tsc
[ 0.431967] pnp: PnP ACPI init
[ 0.431982] ACPI: bus type pnp registered
[ 0.434900] pnp: PnP ACPI: found 15 devices
[ 0.434902] ACPI: ACPI bus type pnp unregistered
[ 0.434912] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.434914] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.434916] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.434918] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.434920] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.434925] system 00:0b: [io 0x0400-0x04bf] has been reserved
[ 0.434929] system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.434933] system 00:0d: [mem 0x000d2000-0x000d3fff] has been reserved
[ 0.434935] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.434937] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.434939] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.434941] system 00:0d: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.434943] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.434945] system 00:0d: [mem 0x00100000-0xcfedffff] could not be reserved
[ 0.434947] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.434950] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.434952] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.434954] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.434956] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.434958] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.434960] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[ 0.440081] pci 0000:00:1c.0: BAR 14: assigned [mem 0xeb400000-0xeb5fffff]
[ 0.440084] pci 0000:00:1c.0: BAR 15: assigned [mem 0xeb600000-0xeb7fffff 64bit \
pref] [ 0.440087] pci 0000:00:1c.2: BAR 15: assigned [mem 0xeb800000-0xeb9fffff \
pref] [ 0.440090] pci 0000:00:1c.3: BAR 15: assigned [mem 0xeba00000-0xebbfffff \
64bit pref] [ 0.440092] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.440095] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[ 0.440097] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.440099] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.440102] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.440104] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit \
pref] [ 0.440107] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.440110] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.440113] pci 0000:00:1c.0: bridge window [mem 0xeb400000-0xeb5fffff]
[ 0.440116] pci 0000:00:1c.0: bridge window [mem 0xeb600000-0xeb7fffff 64bit \
pref] [ 0.440121] pci 0000:03:00.0: BAR 6: assigned [mem 0xeb800000-0xeb87ffff \
pref] [ 0.440123] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.440125] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 0.440129] pci 0000:00:1c.2: bridge window [mem 0xe6000000-0xe7ffffff]
[ 0.440132] pci 0000:00:1c.2: bridge window [mem 0xeb800000-0xeb9fffff pref]
[ 0.440137] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.440139] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.440143] pci 0000:00:1c.3: bridge window [mem 0xe8000000-0xe8ffffff]
[ 0.440146] pci 0000:00:1c.3: bridge window [mem 0xeba00000-0xebbfffff 64bit \
pref] [ 0.440151] pci 0000:05:00.0: BAR 6: assigned [mem 0xeb020000-0xeb02ffff \
pref] [ 0.440153] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 0.440155] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.440158] pci 0000:00:1c.4: bridge window [mem 0xe9000000-0xe9ffffff]
[ 0.440162] pci 0000:00:1c.4: bridge window [mem 0xeb000000-0xeb0fffff 64bit \
pref] [ 0.440167] pci 0000:06:00.0: BAR 6: assigned [mem 0xeb120000-0xeb12ffff \
pref] [ 0.440168] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.440171] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.440174] pci 0000:00:1c.5: bridge window [mem 0xea000000-0xeaffffff]
[ 0.440177] pci 0000:00:1c.5: bridge window [mem 0xeb100000-0xeb1fffff 64bit \
pref] [ 0.440182] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.440183] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.440187] pci 0000:00:1e.0: bridge window [mem 0xeb200000-0xeb2fffff]
[ 0.440190] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.440200] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440203] pci 0000:00:01.0: setting latency timer to 64
[ 0.440210] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440213] pci 0000:00:1c.0: setting latency timer to 64
[ 0.440220] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.440223] pci 0000:00:1c.2: setting latency timer to 64
[ 0.440230] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.440233] pci 0000:00:1c.3: setting latency timer to 64
[ 0.440239] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440242] pci 0000:00:1c.4: setting latency timer to 64
[ 0.440249] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.440251] pci 0000:00:1c.5: setting latency timer to 64
[ 0.440256] pci 0000:00:1e.0: setting latency timer to 64
[ 0.440259] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.440261] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.440262] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.440264] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.440266] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.440267] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.440269] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[ 0.440271] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.440272] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.440274] pci_bus 0000:02: resource 1 [mem 0xeb400000-0xeb5fffff]
[ 0.440276] pci_bus 0000:02: resource 2 [mem 0xeb600000-0xeb7fffff 64bit pref]
[ 0.440277] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.440279] pci_bus 0000:03: resource 1 [mem 0xe6000000-0xe7ffffff]
[ 0.440280] pci_bus 0000:03: resource 2 [mem 0xeb800000-0xeb9fffff pref]
[ 0.440282] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.440284] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe8ffffff]
[ 0.440285] pci_bus 0000:04: resource 2 [mem 0xeba00000-0xebbfffff 64bit pref]
[ 0.440287] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.440289] pci_bus 0000:05: resource 1 [mem 0xe9000000-0xe9ffffff]
[ 0.440290] pci_bus 0000:05: resource 2 [mem 0xeb000000-0xeb0fffff 64bit pref]
[ 0.440292] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.440294] pci_bus 0000:06: resource 1 [mem 0xea000000-0xeaffffff]
[ 0.440295] pci_bus 0000:06: resource 2 [mem 0xeb100000-0xeb1fffff 64bit pref]
[ 0.440297] pci_bus 0000:07: resource 1 [mem 0xeb200000-0xeb2fffff]
[ 0.440299] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.440300] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.440302] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.440303] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.440305] pci_bus 0000:07: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.440323] NET: Registered protocol family 2
[ 0.440351] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.440610] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.441766] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.442051] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.442053] TCP reno registered
[ 0.442056] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.442081] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.442169] NET: Registered protocol family 1
[ 0.442327] pci 0000:01:00.0: Boot video device
[ 0.442342] PCI: CLS 32 bytes, default 64
[ 0.442380] Trying to unpack rootfs image as initramfs...
[ 0.519245] Freeing initrd memory: 4836k freed
[ 0.520366] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.520370] Placing 64MB software IO TLB between ffff88000a200000 - \
ffff88000e200000 [ 0.520371] software IO TLB at phys 0xa200000 - 0xe200000
[ 0.521887] Scanning for low memory corruption every 60 seconds
[ 0.522198] audit: initializing netlink socket (disabled)
[ 0.522208] type=2000 audit(1277623840.516:1): initialized
[ 0.537117] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.540313] VFS: Disk quotas dquot_6.5.2
[ 0.540392] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.541111] SGI XFS with ACLs, security attributes, realtime, large block/inode \
numbers, no debug enabled [ 0.542095] SGI XFS Quota Management subsystem
[ 0.542101] msgmni has been set to 7777
[ 0.542428] alg: No test for stdrng (krng)
[ 0.542555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.542558] io scheduler noop registered
[ 0.542559] io scheduler deadline registered
[ 0.542627] io scheduler cfq registered (default)
[ 0.542736] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.542758] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.542882] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.542910] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.543095] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.543123] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.543303] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.543331] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.543513] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.543541] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.543723] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.543750] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.544237] intel_idle: MWAIT substates: 0x20
[ 0.544238] intel_idle: does not run on family 6 model 23
[ 0.544333] ERST: Table is not found!
[ 0.548457] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.548586] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.549070] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.551327] brd: module loaded
[ 0.551328] Uniform Multi-Platform E-IDE driver
[ 0.551590] ahci 0000:00:1f.2: version 3.0
[ 0.551600] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.551639] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.551671] ahci: SSS flag set, parallel bus scan disabled
[ 0.551700] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl \
SATA mode [ 0.551702] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp \
pio slum part ccc ems [ 0.551706] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.588091] scsi0 : ahci
[ 0.588250] scsi1 : ahci
[ 0.588393] scsi2 : ahci
[ 0.588537] scsi3 : ahci
[ 0.588679] scsi4 : ahci
[ 0.588822] scsi5 : ahci
[ 0.589013] ata1: SATA max UDMA/133 abar m2048@0xeb306000 port 0xeb306100 irq 46
[ 0.589015] ata2: SATA max UDMA/133 abar m2048@0xeb306000 port 0xeb306180 irq 46
[ 0.589017] ata3: SATA max UDMA/133 abar m2048@0xeb306000 port 0xeb306200 irq 46
[ 0.589019] ata4: SATA max UDMA/133 abar m2048@0xeb306000 port 0xeb306280 irq 46
[ 0.589021] ata5: SATA max UDMA/133 abar m2048@0xeb306000 port 0xeb306300 irq 46
[ 0.589024] ata6: SATA max UDMA/133 abar m2048@0xeb306000 port 0xeb306380 irq 46
[ 0.589106] sata_sil24 0000:03:00.0: version 1.1
[ 0.589126] sata_sil24 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.589193] sata_sil24 0000:03:00.0: setting latency timer to 64
[ 0.589321] scsi6 : sata_sil24
[ 0.589465] scsi7 : sata_sil24
[ 0.589574] ata7: SATA max UDMA/100 host m128@0xe7004000 port 0xe7000000 irq 18
[ 0.589577] ata8: SATA max UDMA/100 host m128@0xe7004000 port 0xe7002000 irq 18
[ 0.589757] pata_jmicron 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.589778] pata_jmicron 0000:04:00.0: setting latency timer to 64
[ 0.589848] scsi8 : pata_jmicron
[ 0.589989] scsi9 : pata_jmicron
[ 0.590574] ata9: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 19
[ 0.590577] ata10: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 19
[ 0.590748] tun: Universal TUN/TAP device driver, 1.6
[ 0.590749] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.590820] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.590832] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.590855] r8169 0000:05:00.0: setting latency timer to 64
[ 0.590897] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
[ 0.591052] r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc90000032000, \
00:1f:d0:23:89:fc, XID 1c4000c0 IRQ 47 [ 0.594301] r8169 Gigabit Ethernet driver \
2.3LK-NAPI loaded [ 0.594312] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) \
-> IRQ 17 [ 0.594335] r8169 0000:06:00.0: setting latency timer to 64
[ 0.594378] r8169 0000:06:00.0: irq 48 for MSI/MSI-X
[ 0.594524] r8169 0000:06:00.0: eth1: RTL8168c/8111c at 0xffffc90000036000, \
00:1f:d0:23:89:fe, XID 1c4000c0 IRQ 48 [ 0.597940] PNP: PS/2 Controller \
[PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.597946] PNP: PS/2 appears to have AUX port \
disabled, if this is incorrect please boot with i8042.nopnp [ 0.598091] serio: \
i8042 KBD port at 0x60,0x64 irq 1 [ 0.598273] mice: PS/2 mouse device common for \
all mice [ 0.598348] rtc_cmos 00:04: RTC can wake from S4
[ 0.598415] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.598435] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.598481] md: linear personality registered for level -1
[ 0.598487] md: raid0 personality registered for level 0
[ 0.598488] md: raid1 personality registered for level 1
[ 0.598490] md: raid10 personality registered for level 10
[ 0.598491] md: multipath personality registered for level -4
[ 0.598632] device-mapper: uevent: version 1.0.3
[ 0.598736] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: \
dm-devel@redhat.com [ 0.598863] cpuidle: using governor ladder
[ 0.598864] cpuidle: using governor menu
[ 0.598957] TCP cubic registered
[ 0.598959] NET: Registered protocol family 17
[ 0.599147] registered taskstats version 1
[ 0.599463] rtc_cmos 00:04: setting system clock to 2010-06-27 07:30:41 UTC \
(1277623841) [ 0.616433] input: AT Translated Set 2 keyboard as \
/devices/platform/i8042/serio0/input/input0 [ 0.753081] ata9.00: ATAPI: ASUS \
CRW-5232AS, 1.01, max UDMA/33 [ 0.753109] ata9.01: ATAPI: SAMSUNG CD-ROM SH-152A, \
C503, max UDMA/33 [ 0.760661] ata9.00: configured for UDMA/33
[ 0.776533] ata9.01: configured for UDMA/33
[ 1.072011] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.078907] ata1.00: HPA detected: current 1465147055, native 1465149168
[ 1.078984] ata1.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 1.078987] ata1.00: 1465147055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.080049] ata1.00: configured for UDMA/133
[ 1.096120] scsi 0:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 \
ANSI: 5 [ 1.096514] sd 0:0:0:0: [sda] 1465147055 512-byte logical blocks: (750 \
GB/698 GiB) [ 1.096565] sd 0:0:0:0: [sda] Write Protect is off
[ 1.096567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.096588] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 1.096706] sda: sda1 sda2 sda3
[ 1.107492] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.984010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.994957] ata2.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 1.994960] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.995998] ata2.00: configured for UDMA/133
[ 2.012075] scsi 1:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 \
ANSI: 5 [ 2.012338] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 \
GB/698 GiB) [ 2.012384] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.012386] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.012404] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 2.012543] sdb: sdb1 sdb2 sdb3
[ 2.024798] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.668020] ata7: SATA link down (SStatus 0 SControl 0)
[ 2.900014] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.909329] ata3.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 2.909333] ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.910376] ata3.00: configured for UDMA/133
[ 2.924103] scsi 2:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 \
ANSI: 5 [ 2.924346] sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 \
GB/698 GiB) [ 2.924383] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.924385] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.924402] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 2.924523] sdc: sdc1 sdc2 sdc3
[ 2.935659] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.812013] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.820999] ata4.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 3.821002] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.822063] ata4.00: configured for UDMA/133
[ 3.836083] scsi 3:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 \
ANSI: 5 [ 3.836295] sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 \
GB/698 GiB) [ 3.836331] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.836333] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.836349] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 3.836461] sdd: sdd1 sdd2 sdd3
[ 3.852862] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 4.724010] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.733560] ata5.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 4.733563] ata5.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.734607] ata5.00: configured for UDMA/133
[ 4.748074] scsi 4:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 \
ANSI: 5 [ 4.748292] sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 \
GB/698 GiB) [ 4.748329] sd 4:0:0:0: [sde] Write Protect is off
[ 4.748331] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4.748347] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 4.748460] sde: sde1 sde2 sde3
[ 4.765032] sd 4:0:0:0: [sde] Attached SCSI disk
[ 5.636010] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.650269] ata6.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 5.650272] ata6.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.651307] ata6.00: configured for UDMA/133
[ 5.664071] scsi 5:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 \
ANSI: 5 [ 5.664331] sd 5:0:0:0: [sdf] 1465149168 512-byte logical blocks: (750 \
GB/698 GiB) [ 5.664369] sd 5:0:0:0: [sdf] Write Protect is off
[ 5.664371] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 5.664388] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 5.664523] sdf: sdf1 sdf2 sdf3
[ 5.685434] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 7.864028] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[ 7.866455] ata8.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
[ 7.866458] ata8.00: 145226112 sectors, multi 16: LBA48 NCQ (not used)
[ 7.869639] ata8.00: configured for UDMA/100
[ 7.869712] scsi 7:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 \
ANSI: 5 [ 7.869962] sd 7:0:0:0: [sdg] 145226112 512-byte logical blocks: (74.3 \
GB/69.2 GiB) [ 7.870000] sd 7:0:0:0: [sdg] Write Protect is off
[ 7.870002] sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 7.870021] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't \
support DPO or FUA [ 7.870118] sdg:
[ 7.870473] scsi 8:0:0:0: CD-ROM ASUS CRW-5232AS 1.01 PQ: 0 \
ANSI: 5 [ 7.871134] scsi 8:0:1:0: CD-ROM SAMSUNG CD-ROM SH-152A C503 \
PQ: 0 ANSI: 5 [ 7.883148] sdg1 < sdg5 sdg6 sdg7 > sdg2 sdg3 sdg4
[ 7.901294] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 8.024083] Freeing unused kernel memory: 500k freed
[ 8.024181] Write protecting the kernel read-only data: 6144k
[ 8.024273] Freeing unused kernel memory: 152k freed
[ 8.024330] Freeing unused kernel memory: 76k freed
[ 8.100190] udev: starting version 157
[ 8.148354] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 8.148358] Uniform CD-ROM driver Revision: 3.20
[ 8.148449] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 8.152450] sr1: scsi3-mmc drive: 1x/52x cd/rw xa/form2 cdda tray
[ 8.152540] sr 8:0:1:0: Attached scsi CD-ROM sr1
[ 8.158953] usbcore: registered new interface driver usbfs
[ 8.158979] usbcore: registered new interface driver hub
[ 8.160010] usbcore: registered new device driver usb
[ 8.161859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.161885] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.161912] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 8.161915] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 8.161935] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 8.171897] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 8.171906] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xeb305000
[ 8.180501] Floppy drive(s): fd0 is 1.44M
[ 8.185535] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 8.185560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.185562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.185565] usb usb1: Product: EHCI Host Controller
[ 8.185567] usb usb1: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 ehci_hcd
[ 8.185569] usb usb1: SerialNumber: 0000:00:1a.7
[ 8.185677] hub 1-0:1.0: USB hub found
[ 8.185681] hub 1-0:1.0: 6 ports detected
[ 8.185769] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.185811] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8.185814] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.185820] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 8.189727] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 8.189756] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xeb304000
[ 8.200626] FDC 0 is a post-1991 82077
[ 8.205523] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.205539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.205542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.205544] usb usb2: Product: EHCI Host Controller
[ 8.205546] usb usb2: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 ehci_hcd
[ 8.205548] usb usb2: SerialNumber: 0000:00:1d.7
[ 8.205634] hub 2-0:1.0: USB hub found
[ 8.205637] hub 2-0:1.0: 6 ports detected
[ 8.206911] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.207016] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.207022] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 8.207025] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 8.207031] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 8.207058] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e200
[ 8.207085] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.207087] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.207089] usb usb3: Product: UHCI Host Controller
[ 8.207090] usb usb3: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 uhci_hcd
[ 8.207091] usb usb3: SerialNumber: 0000:00:1a.0
[ 8.207153] hub 3-0:1.0: USB hub found
[ 8.207156] hub 3-0:1.0: 2 ports detected
[ 8.207215] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 8.207220] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 8.207222] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 8.207227] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 8.207253] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 8.207287] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.207289] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.207293] usb usb4: Product: UHCI Host Controller
[ 8.207294] usb usb4: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 uhci_hcd
[ 8.207296] usb usb4: SerialNumber: 0000:00:1a.1
[ 8.207350] hub 4-0:1.0: USB hub found
[ 8.207353] hub 4-0:1.0: 2 ports detected
[ 8.207412] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.207416] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 8.207418] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 8.207424] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 8.207443] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
[ 8.207466] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.207467] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.207469] usb usb5: Product: UHCI Host Controller
[ 8.207470] usb usb5: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 uhci_hcd
[ 8.207472] usb usb5: SerialNumber: 0000:00:1a.2
[ 8.207526] hub 5-0:1.0: USB hub found
[ 8.207529] hub 5-0:1.0: 2 ports detected
[ 8.207590] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.207594] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.207597] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.207602] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 8.207621] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 8.207645] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.207646] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.207648] usb usb6: Product: UHCI Host Controller
[ 8.207649] usb usb6: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 uhci_hcd
[ 8.207651] usb usb6: SerialNumber: 0000:00:1d.0
[ 8.207705] hub 6-0:1.0: USB hub found
[ 8.207708] hub 6-0:1.0: 2 ports detected
[ 8.207764] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.207768] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.207770] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.207776] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 8.207795] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 8.207821] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.207823] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.207825] usb usb7: Product: UHCI Host Controller
[ 8.207826] usb usb7: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 uhci_hcd
[ 8.207828] usb usb7: SerialNumber: 0000:00:1d.1
[ 8.207882] hub 7-0:1.0: USB hub found
[ 8.207885] hub 7-0:1.0: 2 ports detected
[ 8.207940] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.207945] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.207947] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.207952] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 8.207970] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 8.207994] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.207996] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.207997] usb usb8: Product: UHCI Host Controller
[ 8.207999] usb usb8: Manufacturer: Linux 2.6.35-rc3-00001-ga5d1880 uhci_hcd
[ 8.208000] usb usb8: SerialNumber: 0000:00:1d.2
[ 8.208066] hub 8-0:1.0: USB hub found
[ 8.208069] hub 8-0:1.0: 2 ports detected
[ 8.621217] md: md3 stopped.
[ 8.622733] md: bind<sdc1>
[ 8.622866] md: bind<sdb1>
[ 8.622995] md: bind<sdf1>
[ 8.623120] md: bind<sde1>
[ 8.623259] md: bind<sdd1>
[ 8.623381] md: bind<sda1>
[ 8.624518] md/raid1:md3: active with 6 out of 6 mirrors
[ 8.624536] md3: detected capacity change from 0 to 10001842176
[ 8.671085] md: md4 stopped.
[ 8.675564] md: bind<sdb3>
[ 8.675686] md: bind<sde3>
[ 8.675808] md: bind<sdd3>
[ 8.675950] md: bind<sdf3>
[ 8.676069] md: bind<sdc3>
[ 8.676201] md: bind<sda3>
[ 8.677275] md/raid10:md4: active with 6 out of 6 devices
[ 8.677293] md4: detected capacity change from 0 to 2211448553472
[ 8.680520] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 8.858478] usb 5-1: New USB device found, idVendor=09da, idProduct=000a
[ 8.858481] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.858484] usb 5-1: Product: PS/2+USB Mouse
[ 8.858486] usb 5-1: Manufacturer: A4Tech
[ 8.875126] usbcore: registered new interface driver usbhid
[ 8.875128] usbhid: USB HID core driver
[ 18.795794] PM: Starting manual resume from disk
[ 18.841131] EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null)
[ 21.026414] udev: starting version 157
[ 21.089956] input: Power Button as \
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 21.089960] ACPI: Power \
Button [PWRB] [ 21.090015] input: Power Button as \
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 21.090018] ACPI: Power Button \
[PWRF] [ 21.107163] ACPI: acpi_idle registered with cpuidle
[ 21.107416] Marking TSC unstable due to TSC halts in idle
[ 21.110224] Switching to clocksource hpet
[ 21.111820] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 21.659582] input: A4Tech PS/2+USB Mouse as \
/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3 [ 21.659634] a4tech \
0003:09DA:000A.0001: input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on \
usb-0000:00:1a.2-1/input0 [ 22.226265] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 \
(level, low) -> IRQ 22 [ 22.226322] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 22.226345] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 22.301440] audit: name_count maxed, losing inode data: dev=00:05, inode=24539
[ 22.301461] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 22.301465] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 22.301486] audit: name_count maxed, losing inode data: dev=00:05, inode=23455
[ 22.301490] audit: name_count maxed, losing inode data: dev=00:05, inode=23455
[ 22.301510] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 22.301514] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 22.301980] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 22.302034] HDA Intel 0000:01:00.1: irq 50 for MSI/MSI-X
[ 22.302052] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 22.318662] audit: name_count maxed, losing inode data: dev=00:05, inode=23455
[ 22.318667] audit: name_count maxed, losing inode data: dev=00:05, inode=23455
[ 22.318694] audit: name_count maxed, losing inode data: dev=00:05, inode=23455
[ 22.318698] audit: name_count maxed, losing inode data: dev=00:05, inode=23455
[ 22.318717] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 22.318721] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 22.559262] Adding 2931856k swap on /dev/sda2. Priority:1 extents:1 \
across:2931856k [ 22.563707] Adding 2931856k swap on /dev/sdd2. Priority:1 \
extents:1 across:2931856k [ 22.567898] EXT4-fs (md3): warning: maximal mount count \
reached, running e2fsck is recommended [ 22.598595] EXT4-fs (md3): re-mounted. \
Opts: errors=remount-ro [ 22.704171] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704205] audit: name_count maxed, losing inode data: \
dev=00:07, inode=8 [ 22.704209] audit: name_count maxed, losing inode data: \
dev=00:07, inode=24888 [ 22.704215] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704218] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704252] audit: name_count maxed, losing inode data: \
dev=00:07, inode=8 [ 22.704255] audit: name_count maxed, losing inode data: \
dev=00:07, inode=24891 [ 22.704265] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704268] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704303] audit: name_count maxed, losing inode data: \
dev=00:07, inode=8 [ 22.704306] audit: name_count maxed, losing inode data: \
dev=00:07, inode=24894 [ 22.704312] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704315] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704350] audit: name_count maxed, losing inode data: \
dev=00:07, inode=8 [ 22.704353] audit: name_count maxed, losing inode data: \
dev=00:07, inode=24897 [ 22.704359] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704362] audit: name_count maxed, losing inode data: \
dev=00:05, inode=4 [ 22.704399] audit: name_count maxed, losing inode data: \
dev=00:07, inode=8 [ 22.704402] audit: name_count maxed, losing inode data: \
dev=00:07, inode=24900 [ 22.704404] loop: module loaded
[ 22.740779] it87: Found IT8718F chip at 0x290, revision 5
[ 22.740808] it87: VID is disabled (pins used for GPIO)
[ 22.740815] it87: in3 is VCC (+5V)
[ 22.740818] it87: Beeping is supported
[ 22.869871] [drm] Initialized drm 1.1.0 20060810
[ 22.982298] [drm] radeon kernel modesetting enabled.
[ 22.982345] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.982350] radeon 0000:01:00.0: setting latency timer to 64
[ 22.983371] audit: name_count maxed, losing inode data: dev=00:05, inode=25044
[ 22.983374] audit: name_count maxed, losing inode data: dev=00:05, inode=25044
[ 22.983381] audit: name_count maxed, losing inode data: dev=00:05, inode=25044
[ 22.983409] audit: name_count maxed, losing inode data: dev=00:07, inode=25008
[ 22.983418] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983420] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983423] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983426] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983429] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983432] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983434] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983437] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.983444] audit: name_count maxed, losing inode data: dev=00:05, inode=25044
[ 22.983448] audit: name_count maxed, losing inode data: dev=00:05, inode=25044
[ 22.983501] [drm] initializing kernel modesetting (RV730 0x1002:0x9498).
[ 22.984018] [drm] register mmio base: 0xE5000000
[ 22.984020] [drm] register mmio size: 65536
[ 22.984219] ATOM BIOS: 11x
[ 22.984231] [drm] Clocks initialized !
[ 22.984235] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 22.984238] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.984243] radeon 0000:01:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used)
[ 22.984245] radeon 0000:01:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
[ 22.984257] mtrr: type mismatch for d0000000,10000000 old: write-back new: \
write-combining [ 22.984259] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 22.984260] [drm] RAM width 128bits DDR
[ 22.984331] [TTM] Zone kernel: Available graphics memory: 1991300 kiB.
[ 22.984332] [TTM] Initializing pool allocator.
[ 22.984345] [drm] radeon: 1024M of VRAM memory ready
[ 22.984347] [drm] radeon: 512M of GTT memory ready.
[ 22.984350] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 22.984353] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 22.984355] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 22.984358] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.984361] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.984363] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 22.984391] radeon 0000:01:00.0: irq 51 for MSI/MSI-X
[ 22.984395] [drm] radeon: using MSI.
[ 22.984420] [drm] radeon: irq initialized.
[ 22.984422] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 22.985055] [drm] Loading RV730 Microcode
[ 23.045202] [drm] ring test succeeded in 1 usecs
[ 23.045276] [drm] radeon: ib pool ready.
[ 23.045283] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045286] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045292] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045295] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045297] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045301] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045303] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045310] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045312] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045315] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045317] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045320] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045322] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045325] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045327] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045330] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045332] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045335] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.045337] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045340] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045342] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045345] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045347] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045350] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045352] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045355] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045358] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045360] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045363] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045365] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045368] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045370] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045373] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045375] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.045400] [drm] ib test succeeded in 0 usecs
[ 23.045402] [drm] Enabling audio support
[ 23.045470] [drm] Default TV standard: NTSC
[ 23.045498] [drm] Default TV standard: NTSC
[ 23.045530] [drm] Radeon Display Connectors
[ 23.045536] [drm] Connector 0:
[ 23.045537] [drm] HDMI-A
[ 23.045538] [drm] HPD2
[ 23.045540] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 23.045541] [drm] Encoders:
[ 23.045542] [drm] DFP2: INTERNAL_UNIPHY1
[ 23.045543] [drm] Connector 1:
[ 23.045544] [drm] VGA
[ 23.045546] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 23.045547] [drm] Encoders:
[ 23.045548] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 23.045549] [drm] Connector 2:
[ 23.045550] [drm] DVI-I
[ 23.045551] [drm] HPD1
[ 23.045552] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 23.045554] [drm] Encoders:
[ 23.045555] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 23.045556] [drm] DFP1: INTERNAL_UNIPHY
[ 23.101523] [drm] Internal thermal controller with fan control
[ 23.101539] audit: name_count maxed, losing inode data: dev=00:07, inode=25035
[ 23.101545] audit: name_count maxed, losing inode data: dev=00:07, inode=25046
[ 23.101547] [drm] radeon: power management initialized
[ 23.576968] [drm] fb mappable at 0xD0141000
[ 23.576970] [drm] vram apper at 0xD0000000
[ 23.576971] [drm] size 7258112
[ 23.576972] [drm] fb depth is 24
[ 23.576973] [drm] pitch is 6912
[ 23.576997] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 23.577003] audit: name_count maxed, losing inode data: dev=00:05, inode=4
[ 24.588000] Console: switching to colour frame buffer device 210x65
[ 24.591962] fb0: radeondrmfb frame buffer device
[ 24.591963] drm: registered panic notifier
[ 24.591967] Slow work thread pool: Starting up
[ 24.592062] Slow work thread pool: Ready
[ 24.592066] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 24.665517] NET: Registered protocol family 10
[ 24.665742] lo: Disabled Privacy Extensions
[ 24.699903] REISERFS (device dm-2): found reiserfs format "3.6" with standard \
journal [ 24.699918] REISERFS (device dm-2): using ordered data mode
[ 24.717455] REISERFS (device dm-2): journal params: device dm-2, size 8192, \
journal first block 18, max trans len 1024, max batch 900, max commit age 30, max \
trans age 30 [ 24.717751] REISERFS (device dm-2): checking transaction log (dm-2)
[ 24.803707] REISERFS (device dm-2): Using r5 hash to sort names
[ 24.844003] Filesystem "dm-3": Disabling barriers, not supported with external log \
device [ 24.865278] XFS mounting filesystem dm-3
[ 24.954766] Ending clean XFS mount for filesystem: dm-3
[ 24.955323] Filesystem "dm-0": Disabling barriers, not supported with external log \
device [ 24.983985] XFS mounting filesystem dm-0
[ 25.085500] Ending clean XFS mount for filesystem: dm-0
[ 25.086064] Filesystem "dm-1": Disabling barriers, not supported with external log \
device [ 25.110512] XFS mounting filesystem dm-1
[ 25.229666] Ending clean XFS mount for filesystem: dm-1
[ 28.466739] r8169 0000:05:00.0: eth0: link up
[ 28.466743] r8169 0000:05:00.0: eth0: link up
[ 28.482923] fuse init (API version 7.14)
[ 29.269621] audit: name_count maxed, losing inode data: dev=00:07, inode=26052
[ 29.269627] audit: name_count maxed, losing inode data: dev=00:07, inode=26052
[ 29.269630] audit: name_count maxed, losing inode data: dev=00:07, inode=26052
[ 29.269634] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269637] audit: name_count maxed, losing inode data: dev=00:07, inode=26057
[ 29.269640] audit: name_count maxed, losing inode data: dev=00:07, inode=26057
[ 29.269651] audit: name_count maxed, losing inode data: dev=00:07, inode=26057
[ 29.269653] audit: name_count maxed, losing inode data: dev=00:07, inode=26057
[ 29.269657] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269660] audit: name_count maxed, losing inode data: dev=00:07, inode=26062
[ 29.269663] audit: name_count maxed, losing inode data: dev=00:07, inode=26062
[ 29.269674] audit: name_count maxed, losing inode data: dev=00:07, inode=26062
[ 29.269680] audit: name_count maxed, losing inode data: dev=00:07, inode=26062
[ 29.269683] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269686] audit: name_count maxed, losing inode data: dev=00:07, inode=26067
[ 29.269688] audit: name_count maxed, losing inode data: dev=00:07, inode=26067
[ 29.269694] audit: name_count maxed, losing inode data: dev=00:07, inode=26067
[ 29.269696] audit: name_count maxed, losing inode data: dev=00:07, inode=26067
[ 29.269699] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269702] audit: name_count maxed, losing inode data: dev=00:07, inode=26072
[ 29.269706] audit: name_count maxed, losing inode data: dev=00:07, inode=26072
[ 29.269712] audit: name_count maxed, losing inode data: dev=00:07, inode=26072
[ 29.269714] audit: name_count maxed, losing inode data: dev=00:07, inode=26072
[ 29.269717] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269719] audit: name_count maxed, losing inode data: dev=00:07, inode=26077
[ 29.269722] audit: name_count maxed, losing inode data: dev=00:07, inode=26077
[ 29.269727] audit: name_count maxed, losing inode data: dev=00:07, inode=26077
[ 29.269730] audit: name_count maxed, losing inode data: dev=00:07, inode=26077
[ 29.269733] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269735] audit: name_count maxed, losing inode data: dev=00:07, inode=26083
[ 29.269738] audit: name_count maxed, losing inode data: dev=00:07, inode=26083
[ 29.269745] audit: name_count maxed, losing inode data: dev=00:07, inode=26083
[ 29.269747] audit: name_count maxed, losing inode data: dev=00:07, inode=26083
[ 29.269750] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269752] audit: name_count maxed, losing inode data: dev=00:07, inode=26088
[ 29.269755] audit: name_count maxed, losing inode data: dev=00:07, inode=26088
[ 29.269764] audit: name_count maxed, losing inode data: dev=00:07, inode=26088
[ 29.269766] audit: name_count maxed, losing inode data: dev=00:07, inode=26088
[ 29.269774] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269776] audit: name_count maxed, losing inode data: dev=00:07, inode=26093
[ 29.269779] audit: name_count maxed, losing inode data: dev=00:07, inode=26093
[ 29.269785] audit: name_count maxed, losing inode data: dev=00:07, inode=26093
[ 29.269791] audit: name_count maxed, losing inode data: dev=00:07, inode=26093
[ 29.269794] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269797] audit: name_count maxed, losing inode data: dev=00:07, inode=26098
[ 29.269799] audit: name_count maxed, losing inode data: dev=00:07, inode=26098
[ 29.269804] audit: name_count maxed, losing inode data: dev=00:07, inode=26098
[ 29.269807] audit: name_count maxed, losing inode data: dev=00:07, inode=26098
[ 29.269810] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269812] audit: name_count maxed, losing inode data: dev=00:07, inode=26103
[ 29.269815] audit: name_count maxed, losing inode data: dev=00:07, inode=26103
[ 29.269821] audit: name_count maxed, losing inode data: dev=00:07, inode=26103
[ 29.269823] audit: name_count maxed, losing inode data: dev=00:07, inode=26103
[ 29.269826] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269828] audit: name_count maxed, losing inode data: dev=00:07, inode=26108
[ 29.269831] audit: name_count maxed, losing inode data: dev=00:07, inode=26108
[ 29.269838] audit: name_count maxed, losing inode data: dev=00:07, inode=26108
[ 29.269840] audit: name_count maxed, losing inode data: dev=00:07, inode=26108
[ 29.269843] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269845] audit: name_count maxed, losing inode data: dev=00:07, inode=26113
[ 29.269847] audit: name_count maxed, losing inode data: dev=00:07, inode=26113
[ 29.269853] audit: name_count maxed, losing inode data: dev=00:07, inode=26113
[ 29.269857] audit: name_count maxed, losing inode data: dev=00:07, inode=26113
[ 29.269859] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269862] audit: name_count maxed, losing inode data: dev=00:07, inode=26118
[ 29.269868] audit: name_count maxed, losing inode data: dev=00:07, inode=26118
[ 29.269876] audit: name_count maxed, losing inode data: dev=00:07, inode=26118
[ 29.269878] audit: name_count maxed, losing inode data: dev=00:07, inode=26118
[ 29.269881] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269883] audit: name_count maxed, losing inode data: dev=00:07, inode=26123
[ 29.269886] audit: name_count maxed, losing inode data: dev=00:07, inode=26123
[ 29.269892] audit: name_count maxed, losing inode data: dev=00:07, inode=26123
[ 29.269894] audit: name_count maxed, losing inode data: dev=00:07, inode=26123
[ 29.269897] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269900] audit: name_count maxed, losing inode data: dev=00:07, inode=26128
[ 29.269902] audit: name_count maxed, losing inode data: dev=00:07, inode=26128
[ 29.269907] audit: name_count maxed, losing inode data: dev=00:07, inode=26128
[ 29.269910] audit: name_count maxed, losing inode data: dev=00:07, inode=26128
[ 29.269913] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269915] audit: name_count maxed, losing inode data: dev=00:07, inode=26133
[ 29.269918] audit: name_count maxed, losing inode data: dev=00:07, inode=26133
[ 29.269923] audit: name_count maxed, losing inode data: dev=00:07, inode=26133
[ 29.269926] audit: name_count maxed, losing inode data: dev=00:07, inode=26133
[ 29.269930] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269932] audit: name_count maxed, losing inode data: dev=00:07, inode=26138
[ 29.269935] audit: name_count maxed, losing inode data: dev=00:07, inode=26138
[ 29.269940] audit: name_count maxed, losing inode data: dev=00:07, inode=26138
[ 29.269942] audit: name_count maxed, losing inode data: dev=00:07, inode=26138
[ 29.269945] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269947] audit: name_count maxed, losing inode data: dev=00:07, inode=26143
[ 29.269950] audit: name_count maxed, losing inode data: dev=00:07, inode=26143
[ 29.269956] audit: name_count maxed, losing inode data: dev=00:07, inode=26143
[ 29.269962] audit: name_count maxed, losing inode data: dev=00:07, inode=26143
[ 29.269965] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269967] audit: name_count maxed, losing inode data: dev=00:07, inode=26148
[ 29.269970] audit: name_count maxed, losing inode data: dev=00:07, inode=26148
[ 29.269975] audit: name_count maxed, losing inode data: dev=00:07, inode=26148
[ 29.269977] audit: name_count maxed, losing inode data: dev=00:07, inode=26148
[ 29.269980] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269982] audit: name_count maxed, losing inode data: dev=00:07, inode=26153
[ 29.269985] audit: name_count maxed, losing inode data: dev=00:07, inode=26153
[ 29.269990] audit: name_count maxed, losing inode data: dev=00:07, inode=26153
[ 29.269992] audit: name_count maxed, losing inode data: dev=00:07, inode=26153
[ 29.269995] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.269998] audit: name_count maxed, losing inode data: dev=00:07, inode=26158
[ 29.270001] audit: name_count maxed, losing inode data: dev=00:07, inode=26158
[ 29.270006] audit: name_count maxed, losing inode data: dev=00:07, inode=26158
[ 29.270008] audit: name_count maxed, losing inode data: dev=00:07, inode=26158
[ 29.270011] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.270013] audit: name_count maxed, losing inode data: dev=00:07, inode=26163
[ 29.270016] audit: name_count maxed, losing inode data: dev=00:07, inode=26163
[ 29.270021] audit: name_count maxed, losing inode data: dev=00:07, inode=26163
[ 29.270024] audit: name_count maxed, losing inode data: dev=00:07, inode=26163
[ 29.270026] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.270029] audit: name_count maxed, losing inode data: dev=00:07, inode=26168
[ 29.270031] audit: name_count maxed, losing inode data: dev=00:07, inode=26168
[ 29.270037] audit: name_count maxed, losing inode data: dev=00:07, inode=26168
[ 29.270039] audit: name_count maxed, losing inode data: dev=00:07, inode=26168
[ 29.270042] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.270049] audit: name_count maxed, losing inode data: dev=00:07, inode=26173
[ 29.270051] audit: name_count maxed, losing inode data: dev=00:07, inode=26173
[ 29.270058] audit: name_count maxed, losing inode data: dev=00:07, inode=26173
[ 29.270060] audit: name_count maxed, losing inode data: dev=00:07, inode=26173
[ 29.270063] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.270065] audit: name_count maxed, losing inode data: dev=00:07, inode=26178
[ 29.270069] audit: name_count maxed, losing inode data: dev=00:07, inode=26178
[ 29.270075] audit: name_count maxed, losing inode data: dev=00:07, inode=26178
[ 29.270077] audit: name_count maxed, losing inode data: dev=00:07, inode=26178
[ 29.270080] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.270082] audit: name_count maxed, losing inode data: dev=00:07, inode=26183
[ 29.270085] audit: name_count maxed, losing inode data: dev=00:07, inode=26183
[ 29.270092] audit: name_count maxed, losing inode data: dev=00:07, inode=26183
[ 29.270095] audit: name_count maxed, losing inode data: dev=00:07, inode=26183
[ 29.270097] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.270100] audit: name_count maxed, losing inode data: dev=00:07, inode=26188
[ 29.270102] audit: name_count maxed, losing inode data: dev=00:07, inode=26188
[ 29.270108] audit: name_count maxed, losing inode data: dev=00:07, inode=26188
[ 29.270111] audit: name_count maxed, losing inode data: dev=00:07, inode=26188
[ 29.270113] audit: name_count maxed, losing inode data: dev=00:07, inode=26044
[ 29.270116] audit: name_count maxed, losing inode data: dev=00:07, inode=26193
[ 29.270118] audit: name_count maxed, losing inode data: dev=00:07, inode=26193
[ 29.270123] audit: name_count maxed, losing inode data: dev=00:07, inode=26193
[ 29.270125] audit: name_count maxed, losing inode data: dev=00:07, inode=26193
[ 29.270128] audit: name_count maxed, losing inode data: dev=00:07, inode=77
[ 29.270130] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270133] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270142] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270145] audit: name_count maxed, losing inode data: dev=00:07, inode=26201
[ 29.270147] audit: name_count maxed, losing inode data: dev=00:07, inode=26201
[ 29.270153] audit: name_count maxed, losing inode data: dev=00:07, inode=26201
[ 29.270155] audit: name_count maxed, losing inode data: dev=00:07, inode=26201
[ 29.270158] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270160] audit: name_count maxed, losing inode data: dev=00:07, inode=26206
[ 29.270163] audit: name_count maxed, losing inode data: dev=00:07, inode=26206
[ 29.270165] audit: name_count maxed, losing inode data: dev=00:07, inode=26206
[ 29.270167] audit: name_count maxed, losing inode data: dev=00:07, inode=26206
[ 29.270170] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270172] audit: name_count maxed, losing inode data: dev=00:07, inode=26211
[ 29.270175] audit: name_count maxed, losing inode data: dev=00:07, inode=26211
[ 29.270177] audit: name_count maxed, losing inode data: dev=00:07, inode=26211
[ 29.270179] audit: name_count maxed, losing inode data: dev=00:07, inode=26211
[ 29.270182] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270184] audit: name_count maxed, losing inode data: dev=00:07, inode=26216
[ 29.270186] audit: name_count maxed, losing inode data: dev=00:07, inode=26216
[ 29.270194] audit: name_count maxed, losing inode data: dev=00:07, inode=26216
[ 29.270196] audit: name_count maxed, losing inode data: dev=00:07, inode=26216
[ 29.270199] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270202] audit: name_count maxed, losing inode data: dev=00:07, inode=26221
[ 29.270205] audit: name_count maxed, losing inode data: dev=00:07, inode=26221
[ 29.270209] audit: name_count maxed, losing inode data: dev=00:07, inode=26221
[ 29.270211] audit: name_count maxed, losing inode data: dev=00:07, inode=26221
[ 29.270214] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270217] audit: name_count maxed, losing inode data: dev=00:07, inode=26226
[ 29.270223] audit: name_count maxed, losing inode data: dev=00:07, inode=26226
[ 29.270227] audit: name_count maxed, losing inode data: dev=00:07, inode=26226
[ 29.270230] audit: name_count maxed, losing inode data: dev=00:07, inode=26226
[ 29.270233] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270235] audit: name_count maxed, losing inode data: dev=00:07, inode=26231
[ 29.270237] audit: name_count maxed, losing inode data: dev=00:07, inode=26231
[ 29.270240] audit: name_count maxed, losing inode data: dev=00:07, inode=26231
[ 29.270242] audit: name_count maxed, losing inode data: dev=00:07, inode=26231
[ 29.270245] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270247] audit: name_count maxed, losing inode data: dev=00:07, inode=26236
[ 29.270249] audit: name_count maxed, losing inode data: dev=00:07, inode=26236
[ 29.270254] audit: name_count maxed, losing inode data: dev=00:07, inode=26236
[ 29.270256] audit: name_count maxed, losing inode data: dev=00:07, inode=26236
[ 29.270259] audit: name_count maxed, losing inode data: dev=00:07, inode=26198
[ 29.270261] audit: name_count maxed, losing inode data: dev=00:07, inode=26241
[ 29.270265] audit: name_count maxed, losing inode data: dev=00:07, inode=26241
[ 29.270270] audit: name_count maxed, losing inode data: dev=00:07, inode=26241
[ 29.270273] audit: name_count maxed, losing inode data: dev=00:07, inode=26241
[ 29.273066] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
[ 29.365226] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
[ 29.368463] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
[ 29.371743] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
[ 29.374825] microcode: Microcode Update Driver: v2.00 \
<tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 29.374866] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26305 [ 29.374869] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374873] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374876] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374881] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374884] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374887] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374889] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374892] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374895] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374897] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374900] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374903] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374906] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374908] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374911] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374919] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374922] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374924] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374927] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374929] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374932] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374934] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374937] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.374940] audit: name_count maxed, \
losing inode data: dev=00:07, inode=26297 [ 29.519986] microcode: CPU0 updated to \
revision 0x705, date = 2008-04-28 [ 29.524502] microcode: CPU1 updated to revision \
0x705, date = 2008-04-28 [ 29.530582] microcode: CPU2 updated to revision 0x705, \
date = 2008-04-28 [ 29.536204] microcode: CPU3 updated to revision 0x705, date = \
2008-04-28 [ 35.289407] r8169 0000:06:00.0: eth1: link down
[ 35.289929] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 41.285117] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 41.495274] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 41.495402] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 41.495405] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module \
option or [ 41.495407] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 7441.002414] python[2799]: segfault at 8 ip 000000312622783b sp 00007fff59e791d0 \
error 6 in libdbus-1.so.3.4.0[3126200000+3e000] [11042.065206] You have old & broken \
userspace please consider updating mesa [25110.641516] usb 5-2: new full speed USB \
device using uhci_hcd and address 3 [25110.810310] usb 5-2: New USB device found, \
idVendor=04e8, idProduct=326c [25110.810314] usb 5-2: New USB device strings: Mfr=1, \
Product=2, SerialNumber=3 [25110.810316] usb 5-2: Product: Samsung ML-2010
[25110.810318] usb 5-2: Manufacturer: Samsung
[25110.810320] usb 5-2: SerialNumber: 3T21BKCL402412V.
[25111.147425] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 \
pid 0x326C [25111.147611] usbcore: registered new interface driver usblp
[25837.288035] usb 5-2: USB disconnect, address 3
[25837.288138] usblp0: removed
[28144.351747] ata9: drained 65536 bytes to clear DRQ.
[28144.460834] ata9.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[28144.460838] sr 8:0:1:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
[28144.460846] ata9.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[28144.460846] res 7f/7f:7f:7f:7f:7f/00:00:00:00:00/7f Emask 0x3 (HSM \
violation) [28144.460849] ata9.01: status: { DRDY DF DRQ ERR }
[28144.460867] ata9: soft resetting link
[28144.633647] ata9.00: configured for UDMA/33
[28144.648525] ata9.01: configured for UDMA/33
[28144.649438] ata9: EH complete
[28200.351742] ata9: drained 65536 bytes to clear DRQ.
[28200.460521] ata9.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[28200.460524] sr 8:0:1:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
[28200.460537] ata9.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[28200.460538] res 7f/7f:7f:7f:7f:7f/00:00:00:00:00/7f Emask 0x3 (HSM \
violation) [28200.460540] ata9.01: status: { DRDY DF DRQ ERR }
[28200.460559] ata9: soft resetting link
[28200.633645] ata9.00: configured for UDMA/33
[28200.648522] ata9.01: configured for UDMA/33
[28200.649401] ata9: EH complete
[28226.352017] ata9: drained 65536 bytes to clear DRQ.
[28226.460488] ata9.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[28226.460491] sr 8:0:1:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
[28226.460499] ata9.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[28226.460505] res 7f/7f:7f:7f:7f:7f/00:00:00:00:00/7f Emask 0x3 (HSM \
violation) [28226.460507] ata9.01: status: { DRDY DF DRQ ERR }
[28226.460526] ata9: soft resetting link
[28226.632650] ata9.00: configured for UDMA/33
[28226.648522] ata9.01: configured for UDMA/33
[28226.649430] ata9: EH complete
[32470.355768] ata9: drained 65536 bytes to clear DRQ.
[32470.464499] ata9.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[32470.464503] sr 8:0:1:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
[32470.464511] ata9.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[32470.464512] res 7f/7f:7f:7f:7f:7f/00:00:00:00:00/7f Emask 0x3 (HSM \
violation) [32470.464514] ata9.01: status: { DRDY DF DRQ ERR }
[32470.464531] ata9: soft resetting link
[32475.660013] ata9: link is slow to respond, please be patient (ready=0)
[32480.477009] ata9: SRST failed (errno=-16)
[32480.477019] ata9: soft resetting link
[32485.673017] ata9: link is slow to respond, please be patient (ready=0)
[32490.489029] ata9: SRST failed (errno=-16)
[32490.489040] ata9: soft resetting link
[32490.661662] ata9.00: configured for UDMA/33
[32490.676531] ata9.01: configured for UDMA/33
[32490.677451] ata9: EH complete
[32709.352741] ata9: drained 65536 bytes to clear DRQ.
[32709.463175] ata9.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[32709.463178] sr 8:0:1:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
[32709.463186] ata9.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[32709.463187] res 7f/7f:7f:7f:7f:7f/00:00:00:00:00/7f Emask 0x3 (HSM \
violation) [32709.463189] ata9.01: status: { DRDY DF DRQ ERR }
[32709.463206] ata9: soft resetting link
[32714.636048] ata9.01: qc timeout (cmd 0xa1)
[32714.636052] ata9.01: failed to IDENTIFY (I/O error, err_mask=0x4)
[32714.636054] ata9.01: revalidation failed (errno=-5)
[32719.685018] ata9: link is slow to respond, please be patient (ready=0)
[32724.672514] ata9: device not ready (errno=-16), forcing hardreset
[32724.672525] ata9: soft resetting link
[32729.833513] ata9: link is slow to respond, please be patient (ready=0)
[32734.720516] ata9: SRST failed (errno=-16)
[32734.720529] ata9: soft resetting link
[32739.888513] ata9: link is slow to respond, please be patient (ready=0)
[32744.773280] ata9: SRST failed (errno=-16)
[32744.773290] ata9: soft resetting link
[32749.932020] ata9: link is slow to respond, please be patient (ready=0)
[32758.297574] ata9.01: link status unknown, clearing UNKNOWN to NONE
[32768.309549] ata9.01: qc timeout (cmd 0xa1)
[32768.309553] ata9.01: failed to IDENTIFY (I/O error, err_mask=0x4)
[32768.309556] ata9.01: revalidation failed (errno=-5)
[32768.309577] ata9: soft resetting link
[32773.509015] ata9: link is slow to respond, please be patient (ready=0)
[32778.325015] ata9: SRST failed (errno=-16)
[32778.325025] ata9: soft resetting link
[32783.521016] ata9: link is slow to respond, please be patient (ready=0)
[32788.352015] ata9: SRST failed (errno=-16)
[32788.352026] ata9: soft resetting link
[32793.556018] ata9: link is slow to respond, please be patient (ready=0)
[32822.024565] ata9.01: link status unknown, clearing UNKNOWN to NONE
[32852.036046] ata9.01: qc timeout (cmd 0xa1)
[32852.036050] ata9.01: failed to IDENTIFY (I/O error, err_mask=0x4)
[32852.036053] ata9.01: revalidation failed (errno=-5)
[32852.036056] ata9.01: disabled
[32852.036061] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[32852.036064] ata9.00: revalidation failed (errno=-5)
[32852.036079] ata9: soft resetting link
[32857.244016] ata9: link is slow to respond, please be patient (ready=0)
[32862.068511] ata9: SRST failed (errno=-16)
[32862.068522] ata9: soft resetting link
[32867.228529] ata9: link is slow to respond, please be patient (ready=0)
[32872.104515] ata9: SRST failed (errno=-16)
[32872.104526] ata9: soft resetting link
[32877.309511] ata9: link is slow to respond, please be patient (ready=0)
[32880.588540] INFO: task hald-addon-stor:6113 blocked for more than 120 seconds.
[32880.588543] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this \
message. [32880.588546] hald-addon-st D 0000000000000002 0 6113 5949 \
0x00000080 [32880.588551] ffff880122a21af8 0000000000000086 0000000000013d00 \
0000000000000000 [32880.588555] ffff880122a21fd8 ffff880122b161c0 ffff880122a21fd8 \
ffff880122a20000 [32880.588559] ffff880122a20000 ffff880122a21fd8 ffff880122a20000 \
ffff880122a21fd8 [32880.588563] Call Trace:
[32880.588570] [<ffffffff812d2715>] scsi_block_when_processing_errors+0x91/0xc2
[32880.588575] [<ffffffff810539c5>] ? autoremove_wake_function+0x0/0x34
[32880.588579] [<ffffffff812303a7>] ? get_disk+0xd9/0xfd
[32880.588593] [<ffffffffa0096301>] sr_open+0x11/0x1b [sr_mod]
[32880.588599] [<ffffffffa0089086>] cdrom_open+0x4d/0x46b [cdrom]
[32880.588603] [<ffffffff812bed32>] ? kobj_lookup+0x1c0/0x1fb
[32880.588607] [<ffffffff8123b3dc>] ? kobject_get+0x1a/0x22
[32880.588616] [<ffffffffa009649b>] sr_block_open+0x8b/0xa8 [sr_mod]
[32880.588619] [<ffffffff812b956b>] ? get_device+0x14/0x1a
[32880.588623] [<ffffffff8110c0a4>] __blkdev_get+0xda/0x391
[32880.588625] [<ffffffff8110c366>] blkdev_get+0xb/0xd
[32880.588628] [<ffffffff8110c40f>] blkdev_open+0xa7/0xe6
[32880.588630] [<ffffffff8110c368>] ? blkdev_open+0x0/0xe6
[32880.588633] [<ffffffff810e2f42>] __dentry_open+0x1ce/0x2fd
[32880.588635] [<ffffffff810e3136>] nameidata_to_filp+0x3a/0x4b
[32880.588638] [<ffffffff810eea66>] do_last+0x4e5/0x64b
[32880.588640] [<ffffffff810f082b>] do_filp_open+0x202/0x641
[32880.588642] [<ffffffff8123b2b3>] ? kobject_put+0x47/0x4b
[32880.588645] [<ffffffff810f96c8>] ? alloc_fd+0x111/0x123
[32880.588647] [<ffffffff810e2c8b>] do_sys_open+0x5e/0x10a
[32880.588649] [<ffffffff810e2d60>] sys_open+0x1b/0x1d
[32880.588652] [<ffffffff810029ab>] system_call_fastpath+0x16/0x1b
[32880.588655] INFO: task hald-addon-stor:6122 blocked for more than 120 seconds.
[32880.588656] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this \
message. [32880.588658] hald-addon-st D 0000000000000002 0 6122 5949 \
0x00000080 [32880.588660] ffff880122abdaa8 0000000000000082 ffff880122abd9f8 \
ffffffff812f0b93 [32880.588663] ffff880122abdfd8 ffff880122b130e0 ffff880122abdfd8 \
ffff880122abc000 [32880.588666] ffff880122abc000 ffff880122abdfd8 ffff880122abc000 \
ffff880122abdfd8 [32880.588669] Call Trace:
[32880.588671] [<ffffffff812f0b93>] ? ata_bmdma_qc_issue+0x41/0x152
[32880.588674] [<ffffffff812e621e>] ? ata_scsi_translate+0x108/0x141
[32880.588676] [<ffffffff812ce4dd>] ? scsi_done+0x0/0x72
[32880.588680] [<ffffffff813cc0dd>] schedule_timeout+0x28/0x275
[32880.588683] [<ffffffff81229cbd>] ? blk_peek_request+0x1c1/0x1d9
[32880.588685] [<ffffffff8123b2b3>] ? kobject_put+0x47/0x4b
[32880.588687] [<ffffffff813cb45e>] wait_for_common+0xc2/0x13c
[32880.588690] [<ffffffff8103798d>] ? default_wake_function+0x0/0xf
[32880.588692] [<ffffffff8122aa40>] ? __generic_unplug_device+0x2d/0x31
[32880.588695] [<ffffffff813cb572>] wait_for_completion+0x18/0x1a
[32880.588697] [<ffffffff8122ddd3>] blk_execute_rq+0x85/0x9e
[32880.588701] [<ffffffffa009746d>] ? sr_do_ioctl+0x24b/0x261 [sr_mod]
[32880.588704] [<ffffffff812d4b50>] scsi_execute+0xf1/0x143
[32880.588706] [<ffffffff812d4c9f>] scsi_execute_req+0xfd/0x12f
[32880.588709] [<ffffffff812cf72b>] T.641+0x3a/0x106
[32880.588711] [<ffffffff810e3136>] ? nameidata_to_filp+0x3a/0x4b
[32880.588713] [<ffffffff812cf83e>] scsi_set_medium_removal+0x47/0x6c
[32880.588717] [<ffffffffa0097220>] sr_lock_door+0x1b/0x1d [sr_mod]
[32880.588721] [<ffffffffa00875e6>] cdrom_release+0x17f/0x1dd [cdrom]
[32880.588723] [<ffffffff8122f4c0>] ? __blkdev_driver_ioctl+0x90/0x9e
[32880.588726] [<ffffffffa0096402>] sr_block_release+0x19/0x27 [sr_mod]
[32880.588729] [<ffffffff8110be7e>] __blkdev_put+0x8b/0x166
[32880.588731] [<ffffffff8110aefa>] ? block_ioctl+0x32/0x36
[32880.588734] [<ffffffff8110bf64>] blkdev_put+0xb/0xd
[32880.588736] [<ffffffff8110bf9f>] blkdev_close+0x39/0x3e
[32880.588738] [<ffffffff810e5645>] fput+0x109/0x1c8
[32880.588740] [<ffffffff810e2b41>] filp_close+0x63/0x6d
[32880.588742] [<ffffffff810e2bf3>] sys_close+0xa8/0xe2
[32880.588745] [<ffffffff810029ab>] system_call_fastpath+0x16/0x1b
[32907.121015] ata9: SRST failed (errno=-16)
[32907.121025] ata9: soft resetting link
[32912.153011] ata9: SRST failed (errno=-16)
[32912.153015] ata9: reset failed, giving up
[32912.153017] ata9.00: disabled
[32917.160013] ata9: link is slow to respond, please be patient (ready=0)
[32922.208016] ata9: device not ready (errno=-16), forcing hardreset
[32922.208025] ata9: soft resetting link
[32927.401025] ata9: link is slow to respond, please be patient (ready=0)
[32932.225025] ata9: SRST failed (errno=-16)
[32932.225035] ata9: soft resetting link
[32937.437017] ata9: link is slow to respond, please be patient (ready=0)
[32942.261018] ata9: SRST failed (errno=-16)
[32942.261028] ata9: soft resetting link
[32947.461016] ata9: link is slow to respond, please be patient (ready=0)
[32977.277018] ata9: SRST failed (errno=-16)
[32977.277029] ata9: soft resetting link
[32977.433092] ata9: EH complete
[38328.708572] [drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but \
no|invalid EDID [38771.138173] XFS mounting filesystem sdg2
[38771.193454] Ending clean XFS mount for filesystem: sdg2
[38781.717662] XFS mounting filesystem sdg2
[38781.741483] Ending clean XFS mount for filesystem: sdg2
[38802.744737] XFS mounting filesystem sdg2
[38802.785366] Ending clean XFS mount for filesystem: sdg2
[38893.006372] XFS mounting filesystem sdg2
[38893.055537] Ending clean XFS mount for filesystem: sdg2
[38937.435516] XFS mounting filesystem sdg2
[38937.484595] Ending clean XFS mount for filesystem: sdg2
Best regards,
--Edwin
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic