[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-ide
Subject:    [PATCH 09/13] sata_sil: convert to new probing mechanism and add hotplug support
From:       Tejun Heo <htejun () gmail ! com>
Date:       2006-05-31 11:25:45
Message-ID: 11490747453405-git-send-email-htejun () gmail ! com
[Download RAW message or body]

Convert to new probing mechanism and add hotplug support by enabling
SATA IRQ for SError.N, marking ehi for hotplug and scheduling EH on
SATA IRQs.

Sil3112/3512/3114 family of controllers use COMRESET as TF clearing
point and can reliably wait for D2H FIS after COMRESET whether the FIS
is the first D2H FIS after POR or in response to the COMRESET.  Thus,
setting ATA_FLAG_HRST_TO_RESUME is enough for device detection after
hotplug.

Signed-off-by: Tejun Heo <htejun@gmail.com>

---

 drivers/scsi/sata_sil.c |   21 +++++++++++++--------
 1 files changed, 13 insertions(+), 8 deletions(-)

e573890b00426189e1e223967a2c46fb758bf06e
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 7d43cd3..0898cbe 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -56,7 +56,7 @@ enum {
 	SIL_FLAG_MOD15WRITE	= (1 << 30),
 
 	SIL_DFL_HOST_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO,
+				  ATA_FLAG_MMIO | ATA_FLAG_HRST_TO_RESUME,
 
 	/*
 	 * Controller IDs
@@ -186,7 +186,6 @@ static const struct ata_port_operations 
 	.check_status		= ata_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
-	.probe_reset		= ata_std_probe_reset,
 	.post_set_mode		= sil_post_set_mode,
 	.bmdma_setup            = ata_bmdma_setup,
 	.bmdma_start            = ata_bmdma_start,
@@ -344,6 +343,11 @@ static void sil_host_intr(struct ata_por
 	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
 	u8 status;
 
+	if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
+		ata_ehi_hotplugged(&ap->eh_info);
+		goto freeze;
+	}
+
 	if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
 		goto freeze;
 
@@ -415,7 +419,7 @@ static irqreturn_t sil_interrupt(int irq
 		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
 			continue;
 
-		if (!(bmdma2 & SIL_DMA_COMPLETE))
+		if (!(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ)))
 			continue;
 
 		sil_host_intr(ap, bmdma2);
@@ -432,6 +436,9 @@ static void sil_freeze(struct ata_port *
 	void __iomem *mmio_base = ap->host_set->mmio_base;
 	u32 tmp;
 
+	/* global IRQ mask doesn't block SATA IRQ, turn off explicitly */
+	writel(0, mmio_base + sil_port[ap->port_no].sien);
+
 	/* plug IRQ */
 	tmp = readl(mmio_base + SIL_SYSCFG);
 	tmp |= SIL_MASK_IDE0_INT << ap->port_no;
@@ -448,6 +455,9 @@ static void sil_thaw(struct ata_port *ap
 	ata_chk_status(ap);
 	ata_bmdma_irq_clear(ap);
 
+	/* turn on SATA IRQ */
+	writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien);
+
 	/* turn on IRQ */
 	tmp = readl(mmio_base + SIL_SYSCFG);
 	tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no);
@@ -621,11 +631,6 @@ static int sil_init_one (struct pci_dev 
 			       mmio_base + sil_port[2].bmdma);
 	}
 
-	/* mask all SATA phy-related interrupts */
-	/* TODO: unmask bit 6 (SError N bit) for hotplug */
-	for (i = 0; i < probe_ent->n_ports; i++)
-		writel(0, mmio_base + sil_port[i].sien);
-
 	pci_set_master(pdev);
 
 	/* FIXME: check ata_device_add return value */
-- 
1.3.2


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]