[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: Re: Linux hangs during IDE initialization at boot for 30 sec
From: Rolf Offermanns <roffermanns () sysgo ! com>
Date: 2005-02-03 12:58:16
Message-ID: 200502031358.16827.roffermanns () sysgo ! com
[Download RAW message or body]
On Wednesday 02 February 2005 00:18, you wrote:
>
> The IDE layer waits up to 30 seconds for a device to drop it's busy bit,
> which is necessary for some drives that aren't fully initialized yet.
>
> I suspect in your case, it's reading "ff", which indicates either that
> there is no hardware where the kernel tries to probe, or that there is
> bogus IDE interfaces which don't properly have the D7 line pulled low so
> that BUSY appears not set in absence of a drive.
>
I have the same kind of bogus hardware here. What would be the right place to
workaround this? (unfortunately it's not possible to fix/change the
hardware).
-Rolf
--
Rolf Offermanns <roffermanns@sysgo.com>
SYSGO AG Tel.: +49-6136-9948-0
Am Pfaffenstein 14 Fax: +49-6136-9948-10
55270 Klein-Winternheim http://www.sysgo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic