[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: Bug in sata_promise v1.00 ?
From: pascal.junod () epfl ! ch
Date: 2004-11-24 9:51:45
Message-ID: 1101289905.41a459b1d6e0c () imapwww ! epfl ! ch
[Download RAW message or body]
This message is in MIME format.
Hi there !
I have a problem with the sata_promise driver. My motherboard is an ASUS A8V
Deluxe, (Athlon64 3800+ CPU, 4GB RAM) and I have plugged a harddisk Maxtor
6B300S0 300GB on the SATA Promise controller in IDE-mode.
Unluckily, using a gentoo livecd version 2004.3 amd64, the kernel is compiled
with the 1.0 version of the promise driver, and it does not see the disk.
Using a SuSE 9.1 amd64 kernel, the latter is compiled with the 0.91 version of
the promise driver, and everything works fine.
Any clue ?
I have attached both boot.msg to this mail.
Pascal
PS:
The Kernel BUG under Gentoo was produced by a rmmod attempt !?
["boot.msg.promise_v091_SuSE" (text/plain)]
Inspecting /boot/System.map-2.6.4-52-default
Loaded 23391 symbols from /boot/System.map-2.6.4-52-default.
Symbols match kernel version 2.6.4.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Bootdata ok (command line is root=/dev/sda3 vga=0x31a splash=silent console=tty0 \
desktop resume=/dev/sda2 showopts) <4>Linux version 2.6.4-52-default \
(geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Wed Apr 7 02:15:23 UTC 2004 \
<6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 \
(usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
<4> BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)
<4> BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)
<4> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
<4> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
<4> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
<7>ACPI: have wakeup address 0x10000001000
<6>No mptable found.
<6>No mptable found.
<4>On node 0 totalpages: 1310720
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 1306624 pages, LIFO batch:16
<4> HighMem zone: 0 pages, LIFO batch:1
<6>Looks like a VIA chipset. Disabling IOMMU. Overwrite with "iommu=allowed"
<6>PCI bridge 00:01 from 1106 found. Setting "noapic". Overwrite with "apic"
<6>ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa840
<6>ACPI: RSDT (v001 A M I OEMRSDT 0x06000417 MSFT 0x00000097) @ 0x00000000bffb0000
<6>ACPI: FADT (v001 A M I OEMFACP 0x06000417 MSFT 0x00000097) @ 0x00000000bffb0200
<6>ACPI: MADT (v001 A M I OEMAPIC 0x06000417 MSFT 0x00000097) @ 0x00000000bffb0390
<6>ACPI: OEMB (v001 A M I OEMBIOS 0x06000417 MSFT 0x00000097) @ 0x00000000bffc0040
<6>ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>Processor #0 15:15 APIC version 16
<6>ACPI: Skipping IOAPIC probe due to 'noapic' option.
<6>Using ACPI for processor (LAPIC) configuration information
<4>Intel MultiProcessor Specification v1.4
<6> Virtual Wire compatibility mode.
<6>OEM ID: ASUSTeK <6>Product ID: Deluxe <6>APIC at: 0xFEE00000
<4>I/O APIC #1 Version 3 at 0xFEC00000.
<6>Processors: 1
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/sda3 vga=0x31a splash=silent console=tty0 desktop \
resume=/dev/sda2 showopts <6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 16 (order 4: 256 bytes)
<4>CKRM Initialized
<6>time.c: Using 1.193182 MHz PIT timer.
<6>time.c: Detected 2403.169 MHz processor.
<4>Console: colour dummy device 80x25
<6>Placing software IO TLB between 0x00000100004f3000 - 0x00000100006f3000
<4>Memory: 4113972k/5242880k available (2166k kernel code, 79244k reserved, 848k \
data, 172k init) <4>Calibrating delay loop... 4718.59 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Initializing.
<6>SELinux: Starting in permissive mode
<6>There is already a security framework initialized, register_security failed.
<6>Failure registering capabilities with the kernel
<6>selinux_register_security: Registering secondary module capability
<6>Capability LSM initialized
<6>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
<4>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<4>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<4>CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 00
<4>POSIX conformance testing by UNIFIX
<6>Using local APIC NMI watchdog using perfctr0
<6>Using local APIC timer interrupts.
<6>Detected 12.516 MHz APIC timer.
<4>do_initcalls
<4>init_elf32_binfmt
<4>init_elf_binfmt
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<6>No customized DSDT found!
<4>ACPI: IRQ9 SCI: Edge set to Level Trigger.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4> ... the first call_usermodehelper: pci_bus
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>vesafb: framebuffer at 0xe8000000, mapped to 0xffffff0000009000, size 16384k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=50
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<4>mtrr: type mismatch for e8000000,1000000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,800000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,400000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,200000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,100000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,80000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,40000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,20000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,10000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,8000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,4000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,2000 old: write-back new: write-combining
<4>mtrr: type mismatch for e8000000,1000 old: write-back new: write-combining
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x800 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x400 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x200 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x100 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x80 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x40 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x20 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x10 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x8 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x4 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x2 base: 0xe8000000
<4>mtrr: size and base must be multiples of 4 kiB
<7>mtrr: size: 0x1 base: 0xe8000000
<6>fb0: VESA VGA frame buffer device
<4>Initial HugeTLB pages allocated: 0
<4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
<6>ikconfig 0.7 with /proc/config*
<5>VFS: Disk quotas dquot_6.5.1
<6>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<6>bootsplash 3.1.6-2004/03/31: looking for picture... no good signature found.
<4>Console: switching to colour frame buffer device 160x64
<6>Real Time Clock Driver v1.12
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.100 (c) Dave Jones
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
<6>VIA8237SATA: chipset revision 128
<6>VIA8237SATA: 100%% native mode on irq 10
<6> ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:pio, hdb:pio
<6> ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:pio, hdd:pio
<6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
<6> ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:pio, hdf:DMA
<6> ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:DMA, hdh:pio
<4>hdf: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive
<4>Using anticipatory io scheduler
<4>ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdg: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive
<4>ide3 at 0x170-0x177,0x376 on irq 15
<4>hdf: ATAPI 48X DVD-ROM drive, 512kB Cache
<6>Uniform CD-ROM driver Revision: 3.20
<4>hdg: ATAPI 40X DVD-ROM DVD-R CD-R/RW CD-MRW drive, 8192kB Cache
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: PS/2 Logitech Mouse on isa0060/serio1
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 65536 buckets, 512Kbytes
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>NET: Registered protocol family 1
<4>Resume Machine: resuming from /dev/sda2
<4>Resuming from device unknown-block(0,0)
<4>Resume Machine: Error -6 resuming
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<5>SCSI subsystem initialized
<7>libata version 1.02 loaded.
<7>sata_promise version 0.91
<6>ata1: SATA max UDMA/133 cmd 0xFFFFFF0001017200 ctl 0xFFFFFF0001017238 bmdma 0x0 \
irq 5 <6>ata2: SATA max UDMA/133 cmd 0xFFFFFF0001017280 ctl 0xFFFFFF00010172B8 bmdma \
0x0 irq 5 <6>ata1: no device found (phy stat 00000000)
<7>ata1: thread exiting
<6>scsi0 : sata_promise
<7>ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:407f
<6>ata2: dev 0 ATA, max UDMA/133, 586114704 sectors (lba48)
<6>ata2: dev 0 configured for UDMA/133
<6>scsi1 : sata_promise
<4>isa bounce pool size: 16 pages
<5> Vendor: ATA Model: Maxtor 6B300S0 Rev: 1.02
<5> Type: Direct-Access ANSI SCSI revision: 05
<6>ata2: dev 0 max request 512KB (lba48)
<5>SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB)
<5>SCSI device sda: drive cache: write through
<6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
<5>Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
<5>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda3: using ordered data mode
<5>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, \
max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: \
sda3: checking transaction log (sda3) <5>ReiserFS: sda3: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<4>Freeing unused kernel memory: 172k freed
<6>Adding 8393952k swap on /dev/sda2. Priority:42 extents:1
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
<5>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda7: using ordered data mode
<5>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, \
max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: \
sda7: checking transaction log (sda7) <5>ReiserFS: sda7: Using r5 hash to sort names
<5>ReiserFS: sda9: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda9: using ordered data mode
<5>ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, \
max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: \
sda9: checking transaction log (sda9) <5>ReiserFS: sda9: Using r5 hash to sort names
<5>ReiserFS: sda8: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda8: using ordered data mode
<5>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, \
max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: \
sda8: checking transaction log (sda8) <5>ReiserFS: sda8: Using r5 hash to sort names
<5>ReiserFS: sda5: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda5: using ordered data mode
<5>ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, \
max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: \
sda5: checking transaction log (sda5) <5>ReiserFS: sda5: Using r5 hash to sort names
<5>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda6: using ordered data mode
<5>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, \
max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: \
sda6: checking transaction log (sda6) <5>ReiserFS: sda6: Using r5 hash to sort names
<6>subfs 0.9
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Nov 24 11:41:48 2004
<notice>run boot scripts (boot.proc)
<notice>exit status of (boot.proc) is (0)
<notice>run boot scripts (boot.shm)
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm) is (0)
<notice>run boot scripts (boot.rootfsck)
Activating swap-devices in /etc/fstab...
doneChecking root file system...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x803 of format 3.6 with standard journal
Blocks (total/free): 2622608/2593633 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
done<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.md boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
/dev/sda1: clean, 34/10040 files, 6912/40128 blocks
Reiserfs super block in block 16 on 0x807 of format 3.6 with standard journal
Blocks (total/free): 2622592/2614246 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda7' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x809 of format 3.6 with standard journal
Blocks (total/free): 58036800/58026817 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda9' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x808 of format 3.6 with standard journal
Blocks (total/free): 2622592/2614287 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda8' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x805 of format 3.6 with standard journal
Blocks (total/free): 2622592/2481306 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda5' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x806 of format 3.6 with standard journal
Blocks (total/free): 2622592/2602740 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/sda6' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
doneSetting updone
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda1 on /boot type ext2 (rw,acl,user_xattr)
/dev/sda7 on /home type reiserfs (rw,acl,user_xattr)
/dev/sda9 on /scratch type reiserfs (rw,acl,user_xattr)
/dev/sda8 on /tmp type reiserfs (rw,acl,user_xattr)
/dev/sda5 on /usr type reiserfs (rw,acl,user_xattr)
/dev/sda6 on /var type reiserfs (rw,acl,user_xattr)
/dev/hdf on /media/dvd type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/hdg on /media/dvdrecorder type subfs \
(ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8) done<notice>exit status of \
(boot.localfs) is (0) <notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions \
boot.loadmodules) Loading required kernel modules
doneActivating remaining swap-devices in /etc/fstab...
doneRestore device permissionsdone
<notice>exit status of (boot.swap boot.scpm boot.restore_permissions \
boot.loadmodules) is (0 0 0 0) <notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'cluster64'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
find: /tmp/ssh-*: No such file or directory
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Creating /var/log/boot.msg
done<notice>killproc: kill(251,29)
<notice>System Boot Control: The system has been set up
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
doneexit status of (boot.klog boot.ipconfig) is (0 0)
<notice>killproc: kill(251,3)
INIT: Entering runlevel: 3
<notice>
Boot logging started on /dev/tty1(/dev/console) at Wed Nov 24 10:42:33 2004
Master Resource Control: previous runlevel: N, switching to runlevel: 3
start services (random hotplug)
<notice>Initializing random number generatordone
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
coldplugexit status of (random hotplug) is (0 0)
<notice>start services (coldplug)
scanning input: ***done
scanning pci: *******.*..**********WWdone
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (coldplug) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
eth0 configuration: eth-id-00:0a:5e:45:88:e5
eth0 IP address: 192.168.0.5/24
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], \
[ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 \
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 \
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=3 PWD=/ \
PREVLEVEL=N LINES=64 SHLVL=2 splash=silent sscripts=35 _=/sbin/startproc \
DAEMON=/sbin/syslogd ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 \
], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 \
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 \
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=3 PWD=/ \
PREVLEVEL=N LINES=64 SHLVL=2 splash=silent sscripts=35 _=/sbin/startproc \
DAEMON=/sbin/klogd ] done
<notice>exit status of (syslog) is (0)
<notice>start services (resmgr portmap)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console \
TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 \
COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=3 \
PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=silent sscripts=35 _=/sbin/startproc \
DAEMON=/sbin/resmgrd ] <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ \
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 \
REDIRECT=/dev/tty1 COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin \
vga=0x31a RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=silent sscripts=35 \
_=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone
Starting resource managerdone
<notice>exit status of (resmgr portmap) is (0 0)
<notice>start services (postfix)
Starting mail service (Postfix)done
<notice>exit status of (postfix) is (0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd powersaved fbset cron alsasound)
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console \
TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 \
COLUMNS=160 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=3 \
PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 splash=silent sscripts=35 _=/sbin/startproc \
DAEMON=/usr/sbin/cron ] Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o \
PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh \
progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 \
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=3 PWD=/ \
PREVLEVEL=N LINES=64 SHLVL=2 splash=silent sscripts=35 _=/sbin/startproc \
DAEMON=/usr/sbin/sshd ] Starting sound driverdone
Starting SSH daemondone
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved \
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e \
/etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh \
progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=160 \
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x31a RUNLEVEL=3 PWD=/ \
PREVLEVEL=N LINES=64 SHLVL=2 splash=silent sscripts=35 _=/sbin/startproc \
DAEMON=/usr/sbin/powersaved ] done
<notice>exit status of (sshd powersaved fbset cron alsasound) is (0 0 0 0 0)
<notice>start services (kbd)
Loading keymap qwertz/fr_CH-latin1.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (kbd) is (0)
<notice>start services (hwscan)
Starting hardware scan on bootMaster Resource Control: runlevel 3 has been reached
<notice>exit status of (hwscan) is (0)
<notice>killproc: kill(544,3)
["boot.msg.promise_v10_gentoo" (text/plain)]
Nov 24 10:17:10 livecd syslog-ng[1914]: syslog-ng version 1.6.5 starting
Nov 24 10:17:10 livecd syslog-ng[1914]: Changing permissions on special file \
/dev/tty12
Nov 24 10:17:10 livecd Bootdata ok (command line is initrd=gentoo.igz root=/dev/ram0 \
init=/linuxrc acpi=ht looptype=squashfs loop=/livecd.squashfs cdroot vga=791 \
splash=silent,theme:livecd-2004.3 BOOT_IMAGE=gentoo )
Nov 24 10:17:10 livecd Linux version 2.6.9-gentoo-r1 (root@amd64.gentoo.osuosl.org) \
(gcc version 3.4.2 (Gentoo Linux 3.4.2-r2, ssp-3.4.1-1, pie-8.7.6.5)) #1 SMP Tue Nov \
2 17:27:26 UTC 2004
Nov 24 10:17:10 livecd BIOS-provided physical RAM map:
Nov 24 10:17:10 livecd BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 24 10:17:10 livecd BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 24 10:17:10 livecd BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov 24 10:17:10 livecd BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
Nov 24 10:17:10 livecd BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)
Nov 24 10:17:10 livecd BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)
Nov 24 10:17:10 livecd BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
Nov 24 10:17:10 livecd BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Nov 24 10:17:10 livecd BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Nov 24 10:17:10 livecd Scanning NUMA topology in Northbridge 24
Nov 24 10:17:10 livecd Number of nodes 1 (0)
Nov 24 10:17:10 livecd Node 0 MemBase 0000000000000000 Limit 000000013fffffff
Nov 24 10:17:10 livecd Using node hash shift of 24
Nov 24 10:17:10 livecd Bootmem setup node 0 0000000000000000-000000013fffffff
Nov 24 10:17:10 livecd No mptable found.
Nov 24 10:17:10 livecd On node 0 totalpages: 1310719
Nov 24 10:17:10 livecd DMA zone: 4096 pages, LIFO batch:1
Nov 24 10:17:10 livecd Normal zone: 1306623 pages, LIFO batch:16
Nov 24 10:17:10 livecd HighMem zone: 0 pages, LIFO batch:1
Nov 24 10:17:10 livecd Looks like a VIA chipset. Disabling IOMMU. Overwrite with \
"iommu=allowed"
Nov 24 10:17:10 livecd ACPI: RSDP (v000 ACPIAM ) @ \
0x00000000000fa840
Nov 24 10:17:10 livecd ACPI: RSDT (v001 A M I OEMRSDT 0x06000417 MSFT 0x00000097) @ \
0x00000000bffb0000
Nov 24 10:17:10 livecd ACPI: FADT (v001 A M I OEMFACP 0x06000417 MSFT 0x00000097) @ \
0x00000000bffb0200
Nov 24 10:17:10 livecd ACPI: MADT (v001 A M I OEMAPIC 0x06000417 MSFT 0x00000097) @ \
0x00000000bffb0390
Nov 24 10:17:10 livecd ACPI: OEMB (v001 A M I OEMBIOS 0x06000417 MSFT 0x00000097) @ \
0x00000000bffc0040
Nov 24 10:17:10 livecd ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ \
0x0000000000000000
Nov 24 10:17:10 livecd ACPI: Local APIC address 0xfee00000
Nov 24 10:17:10 livecd ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 24 10:17:10 livecd Processor #0 15:15 APIC version 16
Nov 24 10:17:10 livecd Using ACPI for processor (LAPIC) configuration information
Nov 24 10:17:10 livecd Intel MultiProcessor Specification v1.4
Nov 24 10:17:10 livecd Virtual Wire compatibility mode.
Nov 24 10:17:10 livecd OEM ID: ASUSTeK <6>Product ID: Deluxe <6>APIC at: \
0xFEE00000
Nov 24 10:17:10 livecd I/O APIC #1 Version 3 at 0xFEC00000.
Nov 24 10:17:10 livecd Processors: 1
Nov 24 10:17:10 livecd Built 1 zonelists
Nov 24 10:17:10 livecd Kernel command line: initrd=gentoo.igz root=/dev/ram0 \
init=/linuxrc acpi=ht looptype=squashfs loop=/livecd.squashfs cdroot vga=791 \
splash=silent,theme:livecd-2004.3 BOOT_IMAGE=gentoo console=tty0
Nov 24 10:17:10 livecd fbsplash: silent
Nov 24 10:17:10 livecd fbsplash: theme livecd-2004.3
Nov 24 10:17:10 livecd Initializing CPU#0
Nov 24 10:17:10 livecd PID hash table entries: 4096 (order: 12, 131072 bytes)
Nov 24 10:17:10 livecd time.c: Using 1.193182 MHz PIT timer.
Nov 24 10:17:10 livecd time.c: Detected 2403.181 MHz processor.
Nov 24 10:17:10 livecd Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized
Nov 24 10:17:10 livecd Console: colour dummy device 80x25
Nov 24 10:17:10 livecd Dentry cache hash table entries: 1048576 (order: 11, 8388608 \
bytes)
Nov 24 10:17:10 livecd Inode-cache hash table entries: 524288 (order: 10, 4194304 \
bytes)
Nov 24 10:17:10 livecd Placing software IO TLB between 0x62a5000 - 0xa2a5000
Nov 24 10:17:10 livecd Memory: 4035876k/5242880k available (2508k kernel code, 0k \
reserved, 673k data, 1960k init)
Nov 24 10:17:10 livecd Calibrating delay loop... 4702.20 BogoMIPS (lpj=2351104)
Nov 24 10:17:10 livecd Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
Nov 24 10:17:10 livecd Couldn't initialize miscdevice /dev/synth.
Nov 24 10:17:10 livecd CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 \
bytes/line)
Nov 24 10:17:10 livecd CPU: L2 Cache: 512K (64 bytes/line)
Nov 24 10:17:10 livecd Using local APIC NMI watchdog using perfctr0
Nov 24 10:17:10 livecd CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 \
bytes/line)
Nov 24 10:17:10 livecd CPU: L2 Cache: 512K (64 bytes/line)
Nov 24 10:17:10 livecd CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 00
Nov 24 10:17:10 livecd per-CPU timeslice cutoff: 511.85 usecs.
Nov 24 10:17:10 livecd task migration cache decay timeout: 1 msecs.
Nov 24 10:17:10 livecd Only one processor found.
Nov 24 10:17:10 livecd Using IO-APIC 1
Nov 24 10:17:10 livecd Using local APIC timer interrupts.
Nov 24 10:17:10 livecd Detected 12.516 MHz APIC timer.
Nov 24 10:17:10 livecd time.c: Using PIT/TSC based timekeeping.
Nov 24 10:17:10 livecd Brought up 1 CPUs
Nov 24 10:17:10 livecd checking if image is initramfs...it isn't (no cpio magic); \
looks like an initrd
Nov 24 10:17:10 livecd NET: Registered protocol family 16
Nov 24 10:17:10 livecd PCI: Using configuration type 1
Nov 24 10:17:10 livecd mtrr: v2.0 (20020519)
Nov 24 10:17:10 livecd ACPI: Subsystem revision 20040816
Nov 24 10:17:10 livecd ACPI: Interpreter disabled.
Nov 24 10:17:10 livecd SCSI subsystem initialized
Nov 24 10:17:10 livecd usbcore: registered new driver usbfs
Nov 24 10:17:10 livecd usbcore: registered new driver hub
Nov 24 10:17:10 livecd PCI: Probing PCI hardware
Nov 24 10:17:10 livecd PCI: Probing PCI hardware (bus 00)
Nov 24 10:17:10 livecd PCI: Using IRQ router default [1106/3227] at 0000:00:11.0
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I8,P0) -> 18
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I13,P0) -> 18
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I15,P1) -> 20
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I15,P0) -> 20
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I16,P0) -> 21
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I16,P0) -> 21
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I16,P1) -> 21
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I16,P1) -> 21
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B0,I16,P2) -> 21
Nov 24 10:17:10 livecd PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Nov 24 10:17:10 livecd agpgart: Detected AGP bridge 0
Nov 24 10:17:10 livecd agpgart: Maximum main memory to use for agp memory: 4938M
Nov 24 10:17:10 livecd agpgart: AGP aperture is 64M @ 0xe4000000
Nov 24 10:17:10 livecd PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Nov 24 10:17:10 livecd IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak \
Exp $
Nov 24 10:17:10 livecd devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Nov 24 10:17:10 livecd devfs: boot_options: 0x0
Nov 24 10:17:10 livecd SGI XFS with ACLs, security attributes, realtime, large \
block/inode numbers, no debug enabled
Nov 24 10:17:10 livecd SGI XFS Quota Management subsystem
Nov 24 10:17:10 livecd Initializing Cryptographic API
Nov 24 10:17:10 livecd PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
Nov 24 10:17:10 livecd PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
Nov 24 10:17:10 livecd PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
Nov 24 10:17:10 livecd PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
Nov 24 10:17:10 livecd inotify init: minor=63
Nov 24 10:17:10 livecd Linux agpgart interface v0.100 (c) Dave Jones
Nov 24 10:17:10 livecd vesafb: framebuffer at 0xe8000000, mapped to \
0xffffff0000080000, size 3072k
Nov 24 10:17:10 livecd vesafb: mode is 1024x768x16, linelength=2048, pages=84
Nov 24 10:17:10 livecd vesafb: scrolling: redraw
Nov 24 10:17:10 livecd vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,200000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,100000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,80000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,40000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,20000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,10000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,8000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,4000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,2000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: type mismatch for e8000000,1000 old: write-back new: \
write-combining
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x800 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x400 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x200 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x100 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x80 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x40 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x20 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x10 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x8 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x4 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x2 base: 0xe8000000
Nov 24 10:17:10 livecd mtrr: size and base must be multiples of 4 kiB
Nov 24 10:17:10 livecd mtrr: size: 0x1 base: 0xe8000000
Nov 24 10:17:10 livecd Console: switching to colour frame buffer device 128x48
Nov 24 10:17:10 livecd fbsplash: console 0 using theme 'livecd-2004.3'
Nov 24 10:17:10 livecd fbsplash: switched splash state to 'on' on console 0
Nov 24 10:17:10 livecd fb0: VESA VGA frame buffer device
Nov 24 10:17:10 livecd serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 24 10:17:10 livecd serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 24 10:17:10 livecd Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ \
sharing enabled
Nov 24 10:17:10 livecd ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 24 10:17:10 livecd mice: PS/2 mouse device common for all mice
Nov 24 10:17:10 livecd input: AT Translated Set 2 keyboard on isa0060/serio0
Nov 24 10:17:10 livecd input: PS/2 Logitech Mouse on isa0060/serio1
Nov 24 10:17:10 livecd RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 \
blocksize
Nov 24 10:17:10 livecd loop: loaded (max 8 devices)
Nov 24 10:17:10 livecd ub: sizeof ub_scsi_cmd 88 ub_dev 1128
Nov 24 10:17:10 livecd usbcore: registered new driver ub
Nov 24 10:17:10 livecd Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 24 10:17:10 livecd ide: Assuming 33MHz system bus speed for PIO modes; override \
with idebus=xx
Nov 24 10:17:10 livecd VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Nov 24 10:17:10 livecd VP_IDE: chipset revision 6
Nov 24 10:17:10 livecd VP_IDE: not 100% native mode: will probe irqs later
Nov 24 10:17:10 livecd VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on \
pci0000:00:0f.1
Nov 24 10:17:10 livecd ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA
Nov 24 10:17:10 livecd ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Nov 24 10:17:10 livecd Probing IDE interface ide0...
Nov 24 10:17:10 livecd hdb: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive
Nov 24 10:17:10 livecd Using deadline io scheduler
Nov 24 10:17:10 livecd ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 24 10:17:10 livecd Probing IDE interface ide1...
Nov 24 10:17:10 livecd fbsplash: switching to verbose mode
Nov 24 10:17:10 livecd hdc: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive
Nov 24 10:17:10 livecd ide1 at 0x170-0x177,0x376 on irq 15
Nov 24 10:17:10 livecd Probing IDE interface ide2...
Nov 24 10:17:10 livecd ide2: Wait for ready failed before probe !
Nov 24 10:17:10 livecd Probing IDE interface ide3...
Nov 24 10:17:10 livecd ide3: Wait for ready failed before probe !
Nov 24 10:17:10 livecd Probing IDE interface ide4...
Nov 24 10:17:10 livecd ide4: Wait for ready failed before probe !
Nov 24 10:17:10 livecd Probing IDE interface ide5...
Nov 24 10:17:10 livecd ide5: Wait for ready failed before probe !
Nov 24 10:17:10 livecd hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Nov 24 10:17:10 livecd Uniform CD-ROM driver Revision: 3.20
Nov 24 10:17:10 livecd hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, \
UDMA(33)
Nov 24 10:17:10 livecd usbcore: registered new driver hiddev
Nov 24 10:17:10 livecd usbcore: registered new driver usbhid
Nov 24 10:17:10 livecd drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Nov 24 10:17:10 livecd CAPI Subsystem Rev 1.1.2.8
Nov 24 10:17:10 livecd NET: Registered protocol family 2
Nov 24 10:17:10 livecd IP: routing cache hash table of 32768 buckets, 512Kbytes
Nov 24 10:17:10 livecd TCP: Hash tables configured (established 262144 bind 65536)
Nov 24 10:17:10 livecd NET: Registered protocol family 1
Nov 24 10:17:10 livecd NET: Registered protocol family 17
Nov 24 10:17:10 livecd RAMDISK: Compressed image found at block 0
Nov 24 10:17:10 livecd VFS: Mounted root (ext2 filesystem) readonly.
Nov 24 10:17:10 livecd Freeing unused kernel memory: 1960k freed
Nov 24 10:17:10 livecd ehci_hcd 0000:00:10.4: EHCI Host Controller
Nov 24 10:17:10 livecd ehci_hcd 0000:00:10.4: irq 21, pci mem ffffff0000042000
Nov 24 10:17:10 livecd ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus \
number 1
Nov 24 10:17:10 livecd ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver \
2004-May-10
Nov 24 10:17:10 livecd hub 1-0:1.0: USB hub found
Nov 24 10:17:10 livecd hub 1-0:1.0: 8 ports detected
Nov 24 10:17:10 livecd USB Universal Host Controller Interface driver v2.2
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.0: UHCI Host Controller
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.0: irq 21, io base 000000000000c800
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus \
number 2
Nov 24 10:17:10 livecd hub 2-0:1.0: USB hub found
Nov 24 10:17:10 livecd hub 2-0:1.0: 2 ports detected
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.1: UHCI Host Controller
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.1: irq 21, io base 000000000000d000
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus \
number 3
Nov 24 10:17:10 livecd hub 3-0:1.0: USB hub found
Nov 24 10:17:10 livecd hub 3-0:1.0: 2 ports detected
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.2: UHCI Host Controller
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.2: irq 21, io base 000000000000d400
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus \
number 4
Nov 24 10:17:10 livecd hub 4-0:1.0: USB hub found
Nov 24 10:17:10 livecd hub 4-0:1.0: 2 ports detected
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.3: UHCI Host Controller
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.3: irq 21, io base 000000000000d800
Nov 24 10:17:10 livecd uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus \
number 5
Nov 24 10:17:10 livecd hub 5-0:1.0: USB hub found
Nov 24 10:17:10 livecd hub 5-0:1.0: 2 ports detected
Nov 24 10:17:10 livecd ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) \
Driver (PCI)
Nov 24 10:17:10 livecd Initializing USB Mass Storage driver...
Nov 24 10:17:10 livecd usbcore: registered new driver usb-storage
Nov 24 10:17:10 livecd USB Mass Storage support registered.
Nov 24 10:17:10 livecd ieee1394: Initialized config rom entry `ip1394'
Nov 24 10:17:10 livecd sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Nov 24 10:17:10 livecd ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not \
find reiserfs on hdb
Nov 24 10:17:10 livecd VFS: Can't find ext3 filesystem on dev hdb.
Nov 24 10:17:10 livecd VFS: Can't find ext2 filesystem on dev hdb.
Nov 24 10:17:10 livecd SQUASHFS error: Can't find a SQUASHFS superblock on hdb
Nov 24 10:17:10 livecd FAT: bogus number of reserved sectors
Nov 24 10:17:10 livecd VFS: Can't find a valid FAT filesystem on dev hdb.
Nov 24 10:17:10 livecd ISO 9660 Extensions: Microsoft Joliet Level 3
Nov 24 10:17:10 livecd ISO 9660 Extensions: RRIP_1991A
Nov 24 10:17:10 livecd Real Time Clock Driver v1.12
Nov 24 10:17:14 livecd parport0: PC-style at 0x378 [PCSPP]
Nov 24 10:17:14 livecd 3c59x: Donald Becker and others. \
www.scyld.com/network/vortex.html
Nov 24 10:17:14 livecd 0000:00:0d.0: 3Com PCI 3c905C Tornado at 0xa400. Vers LK1.1.19
Nov 24 10:17:15 livecd libata version 1.02 loaded.
Nov 24 10:17:15 livecd sata_via version 0.20
Nov 24 10:17:15 livecd sata_via(0000:00:0f.0): routed to hard irq line 4
Nov 24 10:17:15 livecd ata1: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB000 irq \
20
Nov 24 10:17:15 livecd ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xB402 bmdma 0xB008 irq \
20
Nov 24 10:17:15 livecd ata1: no device found (phy stat 00000000)
Nov 24 10:17:15 livecd scsi0 : sata_via
Nov 24 10:17:15 livecd ata2: no device found (phy stat 00000000)
Nov 24 10:17:15 livecd scsi1 : sata_via
Nov 24 10:17:15 livecd isa bounce pool size: 16 pages
Nov 24 10:17:15 livecd sata_promise version 1.00
Nov 24 10:17:15 livecd ata3: SATA max UDMA/133 cmd 0xFFFFFF0000058200 ctl \
0xFFFFFF0000058238 bmdma 0x0 irq 18
Nov 24 10:17:15 livecd ata4: SATA max UDMA/133 cmd 0xFFFFFF0000058280 ctl \
0xFFFFFF00000582B8 bmdma 0x0 irq 18
Nov 24 10:17:16 livecd ata3: no device found (phy stat 00000000)
Nov 24 10:17:16 livecd scsi2 : sata_promise
Nov 24 10:17:16 livecd ata4: dev 0 cfg 49:0000 82:0000 83:0000 84:0000 85:0000 \
86:0000 87:0000 88:0000
Nov 24 10:17:16 livecd ata4: no dma/lba
Nov 24 10:17:16 livecd ata4: dev 0 not supported, ignoring
Nov 24 10:17:16 livecd scsi3 : sata_promise
Nov 24 10:17:20 livecd fbsplash: console 11 using theme 'livecd-2004.3'
Nov 24 10:17:20 livecd fbsplash: switched splash state to 'on' on console 11
Nov 24 10:18:15 livecd ----------- [cut here ] --------- [please bite here ] \
---------
Nov 24 10:18:15 livecd Kernel BUG at pageattr:107
Nov 24 10:18:15 livecd invalid operand: 0000 [1] SMP
Nov 24 10:18:15 livecd CPU 0
Nov 24 10:18:15 livecd Modules linked in: evdev sata_promise sata_via libata 3c59x sg \
parport_pc parport rtc sbp2 ohci1394 ieee1394 usb_storage ohci_hcd \
uhci_hcd ehci_hcd
Nov 24 10:18:15 livecd Pid: 3142, comm: rmmod Not tainted 2.6.9-gentoo-r1
Nov 24 10:18:15 livecd RIP: 0010:[<ffffffff8011e279>] [<ffffffff8011e279>]
Nov 24 10:18:15 livecd RSP: 0018:000001013cd0fda8 EFLAGS: 00010282
Nov 24 10:18:15 livecd RAX: 0000000000000ee0 RBX: 00000100010002a0 RCX: \
000000000000cee0
Nov 24 10:18:15 livecd RDX: 000001000000cee0 RSI: 0000010000000000 RDI: \
000001013fffe080
Nov 24 10:18:15 livecd RBP: 00000100fb800000 R08: 000ffffffffff000 R09: \
ffffffff8017d5ca
Nov 24 10:18:15 livecd R10: 0000000000000000 R11: 0000000000000000 R12: \
000001000000cee0
Nov 24 10:18:15 livecd R13: 8000000000000163 R14: 8000000000000163 R15: \
0000007fbffffa98
Nov 24 10:18:15 livecd FS: 00000000005054a0(0000) GS:ffffffff8046b700(0000) \
knlGS:0000000000000000
Nov 24 10:18:15 livecd CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Nov 24 10:18:15 livecd CR2: 0000002a9585e900 CR3: 0000000000101000 CR4: \
00000000000006e0
Nov 24 10:18:15 livecd Process rmmod (pid: 3142, threadinfo 000001013cd0e000, task \
00000100bfdd5070)
Nov 24 10:18:15 livecd Stack: 0000010004704000 0000000000000000 0000000000000000 \
0000000000000002
Nov 24 10:18:15 livecd 8000000000000163 ffffffff8011e340 ffffff0000058000 \
000001013f9a0740
Nov 24 10:18:15 livecd 0000000000000002 00000100bfce1800
Nov 24 10:18:15 livecd Call Trace:[<ffffffff8011e340>] [<ffffffff8011dc6e>] \
[<ffffffffa006c62b>]
Nov 24 10:18:15 livecd [<ffffffff8026d3a8>] [<ffffffff802c5e7d>] [<ffffffff802c61d6>] \
Nov 24 10:18:15 livecd [<ffffffff802c64ed>] [<ffffffff8026d1d5>] [<ffffffff80144743>] \
Nov 24 10:18:15 livecd [<ffffffff8015a2d2>] [<ffffffff8010ef8e>]
Nov 24 10:18:15 livecd
Nov 24 10:18:15 livecd Code: 0f 0b ba 9c 38 80 ff ff ff ff 6b 00 4c 89 e9 48 b8 ff ff \
ff
Nov 24 10:18:15 livecd RIP [<ffffffff8011e279>] RSP <000001013cd0fda8>
Nov 24 10:18:19 livecd dhcpcd[2763]: timed out waiting for a valid DHCP server \
response
Nov 24 10:37:31 livecd <6>NET: Registered protocol family 10
Nov 24 10:37:31 livecd Disabled Privacy Extensions on device ffffffff80406c00(lo)
Nov 24 10:37:31 livecd IPv6 over IPv4 tunneling driver
Nov 24 10:37:31 livecd sshd[3227]: Server listening on :: port 22.
Nov 24 10:37:31 livecd sshd[3227]: error: Bind to port 22 on 0.0.0.0 failed: Address \
already in use.
Nov 24 10:37:31 livecd net.agent[3219]: add event not handled
Nov 24 10:38:27 livecd eth0: no IPv6 routers present
Nov 24 10:38:28 livecd sshd[3261]: Accepted keyboard-interactive/pam for root from \
::ffff:192.168.0.1 port 45301 ssh2
Nov 24 10:38:28 livecd sshd[3261]: lastlog_perform_login: Couldn't stat \
/var/log/lastlog: No such file or directory
Nov 24 10:38:28 livecd sshd[3261]: lastlog_openseek: /var/log/lastlog is not a file \
or directory!
Nov 24 10:38:28 livecd sshd[3264]: lastlog_perform_login: Couldn't stat \
/var/log/lastlog: No such file or directory
Nov 24 10:38:28 livecd sshd[3264]: lastlog_openseek: /var/log/lastlog is not a file \
or directory!
Nov 24 10:38:28 livecd sshd(pam_unix)[3264]: session opened for user root by \
root(uid=0)
Nov 24 10:39:19 livecd sshd[3268]: Accepted keyboard-interactive/pam for root from \
::ffff:192.168.0.1 port 45302 ssh2
Nov 24 10:39:19 livecd sshd(pam_unix)[3271]: session opened for user root by (uid=0)
Nov 24 10:39:43 livecd sshd[3273]: Accepted keyboard-interactive/pam for root from \
::ffff:192.168.0.1 port 45303 ssh2
Nov 24 10:39:43 livecd sshd(pam_unix)[3276]: session opened for user root by (uid=0)
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic