[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ide
Subject: [patch-kj] MIN/MAX removal in ide-timing.h
From: maximilian attems <janitor () sternwelten ! at>
Date: 2004-07-23 14:54:26
Message-ID: 20040723145425.GK1795 () stro ! at
[Download RAW message or body]
I replaced the custom MIN/MAX macros with the type safe min/max macros
from linux/kernel.h.
On Sat, Jul 10, 2004 at 04:03:37PM +0200, Vojtech Pavlik wrote:
> How about if you used the "min_t" and "max_t" macros inside FIT? That
> could help get rid of the casts completely (assuming the second and
> third parameters to FIT are expected to be constants).
Yes, that's better. It reduces the necessary changes to a minimum.
patch applies cleanly to 2.6.8-rc2
From: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
---
linux-2.6.7-bk20-max/drivers/ide/ide-timing.h | 25 ++++++++++++-------------
1 files changed, 12 insertions(+), 13 deletions(-)
diff -puN drivers/ide/ide-timing.h~min-max-ide_ide-timing.h drivers/ide/ide-timing.h
--- linux-2.6.7-bk20/drivers/ide/ide-timing.h~min-max-ide_ide-timing.h 2004-07-11 \
15:07:01.000000000 +0200
+++ linux-2.6.7-bk20-max/drivers/ide/ide-timing.h 2004-07-11 15:07:01.000000000 +0200
@@ -27,6 +27,7 @@
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#include <linux/kernel.h>
#include <linux/hdreg.h>
#define XFER_PIO_5 0x0d
@@ -96,11 +97,9 @@ static struct ide_timing ide_timing[] =
#define IDE_TIMING_UDMA 0x80
#define IDE_TIMING_ALL 0xff
-#define MIN(a,b) ((a)<(b)?(a):(b))
-#define MAX(a,b) ((a)>(b)?(a):(b))
-#define FIT(v,min,max) MAX(MIN(v,max),min)
-#define ENOUGH(v,unit) (((v)-1)/(unit)+1)
-#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
+#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin)
+#define ENOUGH(v,unit) (((v)-1)/(unit)+1)
+#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
#define XFER_MODE 0xf0
#define XFER_UDMA_133 0x48
@@ -188,14 +187,14 @@ static void ide_timing_quantize(struct i
static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct \
ide_timing *m, unsigned int what) {
- if (what & IDE_TIMING_SETUP ) m->setup = MAX(a->setup, b->setup);
- if (what & IDE_TIMING_ACT8B ) m->act8b = MAX(a->act8b, b->act8b);
- if (what & IDE_TIMING_REC8B ) m->rec8b = MAX(a->rec8b, b->rec8b);
- if (what & IDE_TIMING_CYC8B ) m->cyc8b = MAX(a->cyc8b, b->cyc8b);
- if (what & IDE_TIMING_ACTIVE ) m->active = MAX(a->active, b->active);
- if (what & IDE_TIMING_RECOVER) m->recover = MAX(a->recover, b->recover);
- if (what & IDE_TIMING_CYCLE ) m->cycle = MAX(a->cycle, b->cycle);
- if (what & IDE_TIMING_UDMA ) m->udma = MAX(a->udma, b->udma);
+ if (what & IDE_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
+ if (what & IDE_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
+ if (what & IDE_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
+ if (what & IDE_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
+ if (what & IDE_TIMING_ACTIVE ) m->active = max(a->active, b->active);
+ if (what & IDE_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & IDE_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
+ if (what & IDE_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
}
static struct ide_timing* ide_timing_find_mode(short speed)
_
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic