[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-i2c
Subject: Re: [PATCH 0/2] i2c: meson: add support for Meson G12A SoC i2c controller
From: Jian Hu <jian.hu () amlogic ! com>
Date: 2018-11-29 11:55:43
Message-ID: b2bceaf4-92ce-92a4-c382-713d29ae3b70 () amlogic ! com
[Download RAW message or body]
On 2018/11/29 19:02, Jerome Brunet wrote:
> On Thu, 2018-11-29 at 18:59 +0800, Jian Hu wrote:
>> 1)Add G12A SoC i2c compatible string in dt-bindings.
>> 2)Add compatible and data for G12A I2C controller driver.
>>
>> Jian Hu (2):
>> dt-bindings: i2c: meson: add Meson G12A SoC i2c compatible string
>> i2c: meson: add support for Meson G12A SoC I2C controller
>
> Looks to me that the g12a is compatible with the axg. What is the point of
> adding this new compatible string ?
>
I am okay if it is reasonable below in file
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi. I2c controller node just
uses axg's compatible.
i2c0: i2c@1f000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x1f000 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
If it is, I just submit the i2c controller node in meson-g12a.dtsi.
>>
>> Documentation/devicetree/bindings/i2c/i2c-meson.txt | 1 +
>> drivers/i2c/busses/i2c-meson.c | 5 +++++
>> 2 files changed, 6 insertions(+)
>>
>
>
> .
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic