[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-i2c
Subject: [i2c] [PATCH 2/3] [I2C] add PCA9543 chip driver
From: Bryan Wu <bryan.wu () analog ! com>
Date: 2008-01-30 10:09:55
Message-ID: 1201687796-987-3-git-send-email-bryan.wu () analog ! com
[Download RAW message or body]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---
drivers/i2c/chips/Kconfig | 13 +++
drivers/i2c/chips/Makefile | 1 +
drivers/i2c/chips/pca9543.c | 212 +++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c-id.h | 1 +
4 files changed, 227 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/chips/pca9543.c
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index bb8c253..9f05f6f 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -60,6 +60,19 @@ config PCF8575
This device is hard to detect and is rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_PCA9543
+ tristate "Philips PCA9543 bi-directional translating switch"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Philips PCA9543.
+
+ This driver can also be built as a module. If so, the module
+ will be called pca9543.
+
+ These devices are hard to detect and rarely found on mainstream
+ hardware. If unsure, say N.
+
config SENSORS_PCA9539
tristate "Philips PCA9539 16-bit I/O port"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index a1e1f5f..d5a1d98 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
+obj-$(CONFIG_SENSORS_PCA9543) += pca9543.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
diff --git a/drivers/i2c/chips/pca9543.c b/drivers/i2c/chips/pca9543.c
new file mode 100644
index 0000000..dc19638
--- /dev/null
+++ b/drivers/i2c/chips/pca9543.c
@@ -0,0 +1,212 @@
+/*
+ pca9543.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ Dan Eaton <dan.eaton@rocketlogix.com>
+ Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with
+ the help of Jean Delvare <khali@linux-fr.org>
+
+ Copyright (C) 2007 Michael Hennerich, Analog Devices Inc.
+ <hennerich@blackfin.uclinux.org>
+ based on the pcf8574.c
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* A few notes about the PCA9543:
+
+* The PCA9543 is a bi-directional translating switch, controlled by the
+ I2C bus. The SCL/SDA upstream pair fans out to two downstream
+ pairs, or channels. Any individual SCx/SDx channels or combination
+ of channels can be selected, determined by the contents of the
+ programmable control register. Two interrupt inputs, INT0 to INT3,
+ one for each of the downstream pairs, are provided. One interrupt
+ output INT, which acts as an AND of the two interrupt inputs, is
+ provided.
+
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x70,0x71, 0x72, 0x73, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(pca9543);
+
+
+/* Each client has this additional data */
+struct pca9543_data {
+ struct i2c_client client;
+
+ u8 write; /* Remember last written value */
+};
+
+static int pca9543_attach_adapter(struct i2c_adapter *adapter);
+static int pca9543_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pca9543_detach_client(struct i2c_client *client);
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pca9543_driver = {
+ .driver = {
+ .name = "pca9543",
+ },
+ .id = I2C_DRIVERID_PCF8574,
+ .attach_adapter = pca9543_attach_adapter,
+ .detach_client = pca9543_detach_client,
+};
+
+/* following are the sysfs callback functions */
+static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%u\n", i2c_smbus_read_byte(client));
+}
+
+static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
+
+static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pca9543_data *data = i2c_get_clientdata(to_i2c_client(dev));
+ return sprintf(buf, "%u\n", data->write);
+}
+
+static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pca9543_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ if (val > 0xff)
+ return -EINVAL;
+
+ data->write = val;
+ i2c_smbus_write_byte(client, data->write);
+ return count;
+}
+
+static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
+
+static struct attribute *pca9543_attributes[] = {
+ &dev_attr_read.attr,
+ &dev_attr_write.attr,
+ NULL
+};
+
+static const struct attribute_group pca9543_attr_group = {
+ .attrs = pca9543_attributes,
+};
+
+/*
+ * Real code
+ */
+
+static int pca9543_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, pca9543_detect);
+}
+
+/* This function is called by i2c_probe */
+static int pca9543_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *new_client;
+ struct pca9543_data *data;
+ int err = 0;
+ const char *client_name = "pca9543";
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ goto exit;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet. */
+ if (!(data = kzalloc(sizeof(struct pca9543_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &pca9543_driver;
+ new_client->flags = 0;
+
+ /* Now, we would do the remaining detection. But the PCF8574 is plainly
+ impossible to detect! Stupid chip. */
+
+ /* Fill in the remaining client fields and put it into the global list */
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_free;
+
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&new_client->dev.kobj, &pca9543_attr_group);
+ if (err)
+ goto exit_detach;
+ return 0;
+
+ exit_detach:
+ i2c_detach_client(new_client);
+ exit_free:
+ kfree(data);
+ exit:
+ return err;
+}
+
+static int pca9543_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ sysfs_remove_group(&client->dev.kobj, &pca9543_attr_group);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+
+static int __init pca9543_init(void)
+{
+ return i2c_add_driver(&pca9543_driver);
+}
+
+static void __exit pca9543_exit(void)
+{
+ i2c_del_driver(&pca9543_driver);
+}
+
+
+MODULE_AUTHOR
+ ("Frodo Looijaard <frodol@dds.nl>, "
+ "Philip Edelbrock <phil@netroedge.com>, "
+ "Dan Eaton <dan.eaton@rocketlogix.com> "
+ "and Aurelien Jarno <aurelien@aurel32.net>"
+ "Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("PCA9543 driver");
+MODULE_LICENSE("GPL");
+
+module_init(pca9543_init);
+module_exit(pca9543_exit);
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 67d639d..6748bd2 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -134,6 +134,7 @@
#define I2C_DRIVERID_W83L785TS 1047
#define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */
#define I2C_DRIVERID_AD5252 1049
+#define I2C_DRIVERID_PCF8575 1050
/*
* ---- Adapter types ----------------------------------------------------
--
1.5.3.4
_______________________________________________
i2c mailing list
i2c@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic