[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-hwmon
Subject: [PATCH v4 1/2] hwmon: (pmbus) Add support for Infineon Digital Multi-phase xdp152 faimly controllers
From: <Greg.Schwendimann () infineon ! com>
Date: 2022-04-27 18:40:12
Message-ID: 5e6d50e9b28140158f339b0de343eea4 () infineon ! com
[Download RAW message or body]
Add support for devices XDPE152C4, XDPE12584.
Signed-off-by: Greg Schwendimann <Greg.Schwendimann@infineon.com>
---
Separated the device tree bindings documentation
Resending from same email as Signed-off-by header
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/xdpe152c4.rst | 118 ++++++++++++++++++++++++++++++
drivers/hwmon/pmbus/Kconfig | 9 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/xdpe152c4.c | 75 +++++++++++++++++++
5 files changed, 204 insertions(+)
create mode 100644 Documentation/hwmon/xdpe152c4.rst
create mode 100644 drivers/hwmon/pmbus/xdpe152c4.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 863b76289159..355c682f9ec4 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -223,6 +223,7 @@ Hardware Monitoring Kernel Drivers
wm8350
xgene-hwmon
xdpe12284
+ xdpe152c4
zl6100
.. only:: subproject and html
diff --git a/Documentation/hwmon/xdpe152c4.rst b/Documentation/hwmon/xdpe152c4.rst
new file mode 100644
index 000000000000..ab92c32d4d69
--- /dev/null
+++ b/Documentation/hwmon/xdpe152c4.rst
@@ -0,0 +1,118 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver xdpe152
+=====================
+
+Supported chips:
+
+ * Infineon XDPE152C4
+
+ Prefix: 'xdpe152c4'
+
+ * Infineon XDPE15284
+
+ Prefix: 'xdpe15284'
+
+Authors:
+
+ Greg Schwendimann <greg.schwendimann@infineon.com>
+
+Description
+-----------
+
+This driver implements support for Infineon Digital Multi-phase Controller
+XDPE152C4 and XDPE15284 dual loop voltage regulators.
+The devices are compliant with:
+
+- Intel VR13, VR13HC and VR14 rev 1.86
+ converter specification.
+- Intel SVID rev 1.93. protocol.
+- PMBus rev 1.3.1 interface.
+
+Devices support linear format for reading input and output voltage, input
+and output current, input and output power and temperature.
+
+Devices support two pages for telemetry.
+
+The driver provides for current: input, maximum and critical thresholds
+and maximum and critical alarms. Low Critical thresholds and Low critical alarm are
+supported only for current output.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "iin" and 3, 4 for "iout":
+
+**curr[1-4]_crit**
+
+**curr[1-4]_crit_alarm**
+
+**curr[1-4]_input**
+
+**curr[1-4]_label**
+
+**curr[1-4]_max**
+
+**curr[1-4]_max_alarm**
+
+**curr[3-4]_lcrit**
+
+**curr[3-4]_lcrit_alarm**
+
+**curr[3-4]_rated_max**
+
+The driver provides for voltage: input, critical and low critical thresholds
+and critical and low critical alarms.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "vin" and 3, 4 for "vout":
+
+**in[1-4]_min**
+
+**in[1-4]_crit**
+
+**in[1-4_crit_alarm**
+
+**in[1-4]_input**
+
+**in[1-4]_label**
+
+**in[1-4]_max**
+
+**in[1-4]_max_alarm**
+
+**in[1-4]_min**
+
+**in[1-4]_min_alarm**
+
+**in[3-4]_lcrit**
+
+**in[3-4]_lcrit_alarm**
+
+**in[3-4]_rated_max**
+
+**in[3-4]_rated_min**
+
+The driver provides for power: input and alarms.
+The driver exports the following attributes for via the sysfs files, where
+indexes 1, 2 are for "pin" and 3, 4 for "pout":
+
+**power[1-2]_alarm**
+
+**power[1-4]_input**
+
+**power[1-4]_label**
+
+**power[1-4]_max**
+
+**power[1-4]_rated_max**
+
+The driver provides for temperature: input, maximum and critical thresholds
+and maximum and critical alarms.
+The driver exports the following attributes for via the sysfs files:
+
+**temp[1-2]_crit**
+
+**temp[1-2]_crit_alarm**
+
+**temp[1-2]_input**
+
+**temp[1-2]_max**
+
+**temp[1-2]_max_alarm**
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a2ea1d5a8765..fe0d0e44da4f 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -408,6 +408,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_XDPE152
+ tristate "Infineon XDPE152 family"
+ help
+ If you say yes here you get hardware monitoring support for Infineon
+ XDPE15284, XDPE152C4, device.
+
+ This driver can also be built as a module. If so, the module will
+ be called xdpe152c4.
+
config SENSORS_XDPE122
tristate "Infineon XDPE122 family"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index a4a96ac71de7..4678fba5012c 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -43,5 +43,6 @@ obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
+obj-$(CONFIG_SENSORS_XDPE152) += xdpe152c4.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
obj-$(CONFIG_SENSORS_PIM4328) += pim4328.o
diff --git a/drivers/hwmon/pmbus/xdpe152c4.c b/drivers/hwmon/pmbus/xdpe152c4.c
new file mode 100644
index 000000000000..b8a36ef73e45
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdpe152c4.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Infineon Multi-phase Digital VR Controllers
+ *
+ * Copyright (c) 2022 Infineon Technologies. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define XDPE152_PAGE_NUM 2
+
+static struct pmbus_driver_info xdpe152_info = {
+ .pages = XDPE152_PAGE_NUM,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_POWER] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+ .func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+};
+
+static int xdpe152_probe(struct i2c_client *client)
+{
+ struct pmbus_driver_info *info;
+
+ info = devm_kmemdup(&client->dev, &xdpe152_info, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id xdpe152_id[] = {
+ {"xdpe152c4", 0},
+ {"xdpe15284", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, xdpe152_id);
+
+static const struct of_device_id __maybe_unused xdpe152_of_match[] = {
+ {.compatible = "infineon,xdpe152c4"},
+ {.compatible = "infineon,xdpe15284"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, xdpe152_of_match);
+
+static struct i2c_driver xdpe152_driver = {
+ .driver = {
+ .name = "xdpe152c4",
+ .of_match_table = of_match_ptr(xdpe152_of_match),
+ },
+ .probe_new = xdpe152_probe,
+ .id_table = xdpe152_id,
+};
+
+module_i2c_driver(xdpe152_driver);
+
+MODULE_AUTHOR("Greg Schwendimann <greg.schwendimann@infineon.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon XDPE152 family");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.25.1
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic