[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-ha
Subject: Re: Problem on boot...
From: manu <manu () sgi ! jazztel ! es>
Date: 2000-05-12 14:12:22
[Download RAW message or body]
On Fri, 12 May 2000, Alan Robertson wrote:
> Hi Manuel,
>
> manu wrote:
> >
> > Excuse me for my bad english :(
> > I'm configuring the "heartbeat" software...
> > I run hearbet on NODE-1... after 10 seconds i run on NODE-2
> > Real IP:
> > NODE-1 -> 172.31.254.252
> > NODE-2 -> 172.31.254.253
> > Alias IP:
> > 172.31.254.254
> >
> > The NODE-1 boot whith out alias...
> >
> > [root@node1 ha.d]# cat /etc/ha.d/haresources
> > node1 172.31.254.254 dummy
> >
> > [root@node2 ha.d]# cat /etc/ha.d/haresources
> > node2 172.31.254.254 dummy
> >
> > Dummy is a null script... it accept start and stop paremeters...
> >
> > Thks!
> >
> You have a configuration error.
>
> You are directing both node1 and node2 to simultaneously own the same IP
> address. This is always an error. If you assign it to node1 only, then
> when it's down, node2 will automatically take over the IP address, and
> give it back when node1 comes back up.
>
> In every case, you want haresources to be identical across all machines
> in the cluster.
>
> Does this help?
Thks Alan! ;)
As I explain in before mail, my error was another.
Thks at any rate! ;)
> -- Alan Robertson
> alanr@suse.com
>
--
Manuel Cardeñas - Léase... mAnu
E-mail: manu@sgi.jazztel.es
--
------------------------------------------------------------------------------
Linux HA Web Site:
http://linux-ha.org/
Linux HA HOWTO:
http://metalab.unc.edu/pub/Linux/ALPHA/linux-ha/High-Availability-HOWTO.html
------------------------------------------------------------------------------
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic