[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-gpio
Subject: Re: [PATCH v3 2/6] arm64: dts: actions: Add Actions Semiconductor S900 I2C controller nodes
From: Peter Rosin <peda () axentia ! se>
Date: 2018-06-30 20:57:46
Message-ID: F8B97397-EBE6-400A-A9A8-CD415EE24C55 () axentia ! se
[Download RAW message or body]
On June 30, 2018 3:33:26 PM GMT+02:00, Manivannan Sadhasivam \
<manivannan.sadhasivam@linaro.org> wrote:
> Add I2C controller nodes for Actions Semiconductor S900 SoC.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> arch/arm64/boot/dts/actions/s900.dtsi | 60 +++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/actions/s900.dtsi
> b/arch/arm64/boot/dts/actions/s900.dtsi
> index 7ae8b931f000..6f7b89edbe4d 100644
> --- a/arch/arm64/boot/dts/actions/s900.dtsi
> +++ b/arch/arm64/boot/dts/actions/s900.dtsi
> @@ -174,6 +174,66 @@
> #clock-cells = <1>;
> };
>
> + i2c0: i2c@e0170000 {
> + compatible = "actions,s900-i2c";
> + reg = <0 0xe0170000 0 0x1000>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_default>;
> + };
> +
> + i2c1: i2c@e0172000 {
> + compatible = "actions,s900-i2c";
> + reg = <0 0xe0172000 0 0x1000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_default>;
> + };
> +
> + i2c2: i2c@e0174000 {
> + compatible = "actions,s900-i2c";
> + reg = <0 0xe0174000 0 0x1000>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_default>;
> + };
> +
> + i2c3: i2c@e0176000 {
> + compatible = "actions,s900-i2c";
> + reg = <0 0xe0176000 0 0x1000>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@e0178000 {
> + compatible = "actions,s900-i2c";
> + reg = <0 0xe0178000 0 0x1000>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@e017a000 {
> + compatible = "actions,s900-i2c";
> + reg = <0 0xe017a000 0 0x1000>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> pinctrl: pinctrl@e01b0000 {
> compatible = "actions,s900-pinctrl";
> reg = <0x0 0xe01b0000 0x0 0x1000>;
This patch *still* depends on patch 3/6. You need to reorder the series so that it is \
properly bisectable.
Cheers,
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic