[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-gpio
Subject: [PATCH v3 2/2] ACPI / gpio: Add irq_type when a gpio is used as an interrupt
From: Christophe Ricard <christophe.ricard () gmail ! com>
Date: 2015-11-30 22:47:53
Message-ID: 1448923673-2582-3-git-send-email-christophe-h.ricard () st ! com
[Download RAW message or body]
When a gpio is used as an interrupt, the irq_type was not available for
device driver. It is not align with devicetree probing.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
---
drivers/gpio/gpiolib-acpi.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index bbcac3a..cff8736 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -416,9 +416,12 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data)
* GpioIo is used then the only way to set the flag is
* to use _DSD "gpios" property.
*/
- if (lookup->info.gpioint)
+ if (lookup->info.gpioint) {
lookup->info.active_low =
agpio->polarity == ACPI_ACTIVE_LOW;
+ irq_set_irq_type(gpiod_to_irq(lookup->desc),
+ acpi_get_irq_type(agpio->triggering, agpio->polarity));
+ }
}
return 1;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic