[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-fpga
Subject:    Re: [PATCH v3 1/4] Documentation: fpga: dfl: Add documentation for DFHv1
From:       matthew.gerlach () linux ! intel ! com
Date:       2022-10-10 17:34:16
Message-ID: alpine.DEB.2.22.394.2210101013520.2404672 () rhweight-WRK1
[Download RAW message or body]


On Wed, 5 Oct 2022, Ilpo Järvinen wrote:

> On Tue, 4 Oct 2022, matthew.gerlach@linux.intel.com wrote:
>
>> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>>
>> Add documentation describing the extensions provided by Version
>> 1 of the Device Feature Header (DFHv1).
>>
>> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>> ---
>> v3: no change
>>
>> v2: s/GUILD/GUID/
>>     add picture
>> ---
>>  Documentation/fpga/dfl.rst | 49 ++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 49 insertions(+)
>>
>> diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
>> index 15b670926084..7c786b75b498 100644
>> --- a/Documentation/fpga/dfl.rst
>> +++ b/Documentation/fpga/dfl.rst
>> @@ -561,6 +561,55 @@ new DFL feature via UIO direct access, its feature id should be added to the
>>  driver's id_table.
>>
>>
>> +Extending the Device Feature Header - DFHv1
>> +===========================================
>> +The current 8 bytes of the Device Feature Header, hereafter referred to as
>> +to DFHv0, provide very little opportunity for the hardware to describe itself
>> +to software. Version 1 of the Device Feature Header (DFHv1) is being introduced
>> +to provide increased flexibility and extensibility to hardware designs using
>> +Device Feature Lists.  The list below describes some of the goals behind the
>> +changes in DFHv1:
>> +
>> +* Provide a standardized mechanism for features to describe
>> +  parameters/capabilities to software.
>> +* Standardize the use of a GUID for all DFHv1 types.
>> +* Decouple the location of the DFH from the register space of the feature itself.
>> +
>> +Modeled after PCI Capabilities, DFHv1 Parameters provide a mechanism to associate
>> +a list of parameter values to a particular feature.
>> +
>> +With DFHv0, not all features types contained a GUID.  DFHv1 makes the GUID standard
>> +across all types.
>> +
>> +With DFHv0, the register map of a given feature is located immediately following
>> +the DFHv0 in the memory space.  With DFHv1, the location of the feature register
>> +map can be specified as an offset to the DFHv1 or as an absolute address.  The DFHv1
>> +structure is shown below:
>
> I think this is not a good place for be some kind of v1 marketing speak
> (that said, I think it's fine to include those goals you have there).

I understand the need to avoid marketing speak here.  I will update to 
just state the facts.

>
> I'd restructure this so that this section only talks about DFHv1 w/o
> any comparing how v1 is better than v0. Don't base the description on
> how things changed from v0 but just describe v1, that is, like v1 is
> already there, not only being introduced to supercede/extend v0.
>
> And then create v0 section after this section which focuses solely on v0.

I agree that separate sections simply describing v0 and v1 would be 
better.  I may describe v0 first since it shares some fields with v1.

>
> -- 
> i.
>
>> +    +-----------------------------------------------------------------------+
>> +    |63 Type 60|59 DFH VER 52|51 Rsvd 41|40 EOL|39 Next 16|15 VER 12|11 ID 0|
>> +    +-----------------------------------------------------------------------+
>> +    |63                                 GUID_L                             0|
>> +    +-----------------------------------------------------------------------+
>> +    |63                                 GUID_H                             0|
>> +    +-----------------------------------------------------------------------+
>> +    |63                 Address/Offset                            1|  Rel  0|
>> +    +-----------------------------------------------------------------------+
>> +    |63 Size of register set  32|Params 31|30 Group    16|15 Instance      0|
>> +    +-----------------------------------------------------------------------+
>> +    |63 Next parameter offset 32|31 Param Version 16|15 Param ID           0|
>> +    +-----------------------------------------------------------------------+
>> +    |63                 Parameter Data                                     0|
>> +    +-----------------------------------------------------------------------+
>> +
>> +                                  ...
>> +
>> +    +-----------------------------------------------------------------------+
>> +    |63 Next parameter offset 32|31 Param Version 16|15 Param ID           0|
>> +    +-----------------------------------------------------------------------+
>> +    |63                 Parameter Data                                     0|
>> +    +-----------------------------------------------------------------------+
>> +
>>  Open discussion
>>  ===============
>>  FME driver exports one ioctl (DFL_FPGA_FME_PORT_PR) for partial reconfiguration
>>
>
>

[prev in list] [next in list] [prev in thread] [next in thread]