[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-fpga
Subject:    Re: [PATCHv3 6/6] fpga: stratix10-soc: extend driver for bitstream authentication
From:       Richard Gong <richard.gong () linux ! intel ! com>
Date:       2021-01-26 14:00:46
Message-ID: eb20a836-a6df-fb5f-f73d-74f1a7fb77dd () linux ! intel ! com
[Download RAW message or body]

Hi Moritz,

On 1/25/21 11:09 PM, Moritz Fischer wrote:
> On Mon, Jan 25, 2021 at 02:56:28PM -0600, richard.gong@linux.intel.com wrote:
>> From: Richard Gong <richard.gong@intel.com>
>>
>> Extend FPGA manager driver to support FPGA bitstream authentication on
>> Intel SocFPGA platforms.
>>
>> Signed-off-by: Richard Gong <richard.gong@intel.com>
>> ---
>> v3: add handle to retriev the firmware version to keep driver
>>      back compatible
>> v2: use flag defined in stratix10-svc driver
>> ---
>>   drivers/fpga/stratix10-soc.c | 62 +++++++++++++++++++++++++++++++++++++++-----
>>   1 file changed, 56 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c
>> index 657a70c..59d738c 100644
>> --- a/drivers/fpga/stratix10-soc.c
>> +++ b/drivers/fpga/stratix10-soc.c
>> @@ -24,6 +24,10 @@
>>   #define S10_BUFFER_TIMEOUT (msecs_to_jiffies(SVC_RECONFIG_BUFFER_TIMEOUT_MS))
>>   #define S10_RECONFIG_TIMEOUT (msecs_to_jiffies(SVC_RECONFIG_REQUEST_TIMEOUT_MS))
>>   
>> +#define INVALID_FIRMWARE_VERSION	0xFFFF
>> +typedef void (*s10_callback)(struct stratix10_svc_client *client,
>> +			     struct stratix10_svc_cb_data *data);
>> +
>>   /*
>>    * struct s10_svc_buf
>>    * buf:  virtual address of buf provided by service layer
>> @@ -40,11 +44,13 @@ struct s10_priv {
>>   	struct completion status_return_completion;
>>   	struct s10_svc_buf svc_bufs[NUM_SVC_BUFS];
>>   	unsigned long status;
>> +	unsigned int fw_version;
>>   };
>>   
>>   static int s10_svc_send_msg(struct s10_priv *priv,
>>   			    enum stratix10_svc_command_code command,
>> -			    void *payload, u32 payload_length)
>> +			    void *payload, u32 payload_length,
>> +			    s10_callback callback)
>>   {
>>   	struct stratix10_svc_chan *chan = priv->chan;
>>   	struct device *dev = priv->client.dev;
>> @@ -57,6 +63,7 @@ static int s10_svc_send_msg(struct s10_priv *priv,
>>   	msg.command = command;
>>   	msg.payload = payload;
>>   	msg.payload_length = payload_length;
>> +	priv->client.receive_cb = callback;
>>   
>>   	ret = stratix10_svc_send(chan, &msg);
>>   	dev_dbg(dev, "stratix10_svc_send returned status %d\n", ret);
>> @@ -134,6 +141,29 @@ static void s10_unlock_bufs(struct s10_priv *priv, void *kaddr)
>>   }
>>   
>>   /*
>> + * s10_fw_version_callback - callback for the version of running firmware
>> + * @client: service layer client struct
>> + * @data: message from service layer
>> + */
>> +static void s10_fw_version_callback(struct stratix10_svc_client *client,
>> +				    struct stratix10_svc_cb_data *data)
>> +{
>> +	struct s10_priv *priv = client->priv;
>> +	unsigned int *version = (unsigned int *)data->kaddr1;
>> +
>> +	if (data->status == BIT(SVC_STATUS_OK))
>> +		priv->fw_version = *version;
>> +	else if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
>> +		dev_warn(client->dev,
>> +			 "FW doesn't support bitstream authentication\n");
>> +	else
>> +		dev_err(client->dev, "Failed to get FW version %lu\n",
>> +			BIT(data->status));
>> +
>> +	complete(&priv->status_return_completion);
>> +}
>> +
>> +/*
>>    * s10_receive_callback - callback for service layer to use to provide client
>>    * (this driver) messages received through the mailbox.
>>    * client: service layer client struct
>> @@ -186,13 +216,22 @@ static int s10_ops_write_init(struct fpga_manager *mgr,
>>   	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
>>   		dev_dbg(dev, "Requesting partial reconfiguration.\n");
>>   		ctype.flags |= BIT(COMMAND_RECONFIG_FLAG_PARTIAL);
>> +	} else if (info->flags & FPGA_MGR_BITSTREM_AUTHENTICATION) {
> BITSTREAM ;-)
> 
> Nit: Maybe the flag could be FPGA_MGR_BITSTREAM_AUTHENTICATE and/or
> FPGA_MGR_BITSTREAM_AUTH_AND_PERSIST.

Thanks, I will correct both in next submission.

>> +		if (priv->fw_version == INVALID_FIRMWARE_VERSION) {
>> +			dev_err(dev, "FW doesn't support\n");
>> +			return -EINVAL;
>> +		}
>> +
>> +		dev_dbg(dev, "Requesting bitstream authentication.\n");
>> +		ctype.flags |= BIT(COMMAND_AUTHENTICATE_BITSTREAM);
>>   	} else {
>>   		dev_dbg(dev, "Requesting full reconfiguration.\n");
>>   	}
>>   
>>   	reinit_completion(&priv->status_return_completion);
>>   	ret = s10_svc_send_msg(priv, COMMAND_RECONFIG,
>> -			       &ctype, sizeof(ctype));
>> +			       &ctype, sizeof(ctype),
>> +			       s10_receive_callback);
>>   	if (ret < 0)
>>   		goto init_done;
>>   
>> @@ -259,7 +298,7 @@ static int s10_send_buf(struct fpga_manager *mgr, const char *buf, size_t count)
>>   	svc_buf = priv->svc_bufs[i].buf;
>>   	memcpy(svc_buf, buf, xfer_sz);
>>   	ret = s10_svc_send_msg(priv, COMMAND_RECONFIG_DATA_SUBMIT,
>> -			       svc_buf, xfer_sz);
>> +			       svc_buf, xfer_sz, s10_receive_callback);
>>   	if (ret < 0) {
>>   		dev_err(dev,
>>   			"Error while sending data to service layer (%d)", ret);
>> @@ -303,7 +342,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const char *buf,
>>   
>>   			ret = s10_svc_send_msg(
>>   				priv, COMMAND_RECONFIG_DATA_CLAIM,
>> -				NULL, 0);
>> +				NULL, 0, s10_receive_callback);
>>   			if (ret < 0)
>>   				break;
>>   		}
>> @@ -357,7 +396,8 @@ static int s10_ops_write_complete(struct fpga_manager *mgr,
>>   	do {
>>   		reinit_completion(&priv->status_return_completion);
>>   
>> -		ret = s10_svc_send_msg(priv, COMMAND_RECONFIG_STATUS, NULL, 0);
>> +		ret = s10_svc_send_msg(priv, COMMAND_RECONFIG_STATUS,
>> +				       NULL, 0, s10_receive_callback);
>>   		if (ret < 0)
>>   			break;
>>   
>> @@ -411,8 +451,9 @@ static int s10_probe(struct platform_device *pdev)
>>   	if (!priv)
>>   		return -ENOMEM;
>>   
>> +	priv->fw_version = INVALID_FIRMWARE_VERSION;
>>   	priv->client.dev = dev;
>> -	priv->client.receive_cb = s10_receive_callback;
>> +	priv->client.receive_cb = NULL;
>>   	priv->client.priv = priv;
>>   
>>   	priv->chan = stratix10_svc_request_channel_byname(&priv->client,
>> @@ -440,6 +481,15 @@ static int s10_probe(struct platform_device *pdev)
>>   		goto probe_err;
>>   	}
>>   
>> +	/* get the running firmware version */
>> +	ret = s10_svc_send_msg(priv, COMMAND_FIRMWARE_VERSION,
>> +			       NULL, 0, s10_fw_version_callback);
>> +	if (ret) {
>> +		dev_err(dev, "couldn't get firmware version\n");
>> +		fpga_mgr_free(mgr);
>> +		goto probe_err;
>> +	}
>> +
>>   	platform_set_drvdata(pdev, mgr);
>>   	return ret;
>>   
>> -- 
>> 2.7.4
>>
> Thanks,
> Moritz
> 
Regards,
Richard
[prev in list] [next in list] [prev in thread] [next in thread]