[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-fpga
Subject: [PATCH 6/6] fpga-manager: altera-ps-spi: preserve nCONFIG state
From: Moritz Fischer <mdf () kernel ! org>
Date: 2018-03-29 15:36:58
Message-ID: 20180329153658.11614-7-mdf () kernel ! org
[Download RAW message or body]
From: Anatolij Gustschin <agust@denx.de>
If the driver module is loaded when FPGA is configured, the FPGA
is reset because nconfig is pulled low (low-active gpio inited
with GPIOD_OUT_HIGH activates the signal which means setting its
value to low). Init nconfig with GPIOD_OUT_LOW to prevent this.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
---
drivers/fpga/altera-ps-spi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c
index b061408bf0ae..250d9cf9bb1b 100644
--- a/drivers/fpga/altera-ps-spi.c
+++ b/drivers/fpga/altera-ps-spi.c
@@ -254,7 +254,7 @@ static int altera_ps_probe(struct spi_device *spi)
conf->data = of_id->data;
conf->spi = spi;
- conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_HIGH);
+ conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW);
if (IS_ERR(conf->config)) {
dev_err(&spi->dev, "Failed to get config gpio: %ld\n",
PTR_ERR(conf->config));
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic