[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-fpga
Subject: Re: [PATCH] fpga-manager: altera-ps-spi: preserve nCONFIG state
From: Moritz Fischer <mdf () kernel ! org>
Date: 2018-02-14 23:05:20
Message-ID: 20180214230520.GD25618 () tyrael ! ni ! corp ! natinst ! com
[Download RAW message or body]
Hi Anatolij,
On Thu, Feb 01, 2018 at 11:20:04PM +0100, Anatolij Gustschin wrote:
> If the driver module is loaded when FPGA is configured, the FPGA
> is reset because nconfig is pulled low (low-active gpio inited
> with GPIOD_OUT_HIGH activates the signal which means setting its
> value to low). Init nconfig with GPIOD_OUT_LOW to prevent this.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Moritz Fischer <mdf@kernel.org>
> ---
> drivers/fpga/altera-ps-spi.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c
> index c593f33d8db9..6891933d072d 100644
> --- a/drivers/fpga/altera-ps-spi.c
> +++ b/drivers/fpga/altera-ps-spi.c
> @@ -258,7 +258,7 @@ static int altera_ps_probe(struct spi_device *spi)
> }
>
> conf->spi = spi;
> - conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_HIGH);
> + conf->config = devm_gpiod_get(&spi->dev, "nconfig", GPIOD_OUT_LOW);
> if (IS_ERR(conf->config)) {
> dev_err(&spi->dev, "Failed to get config gpio: %ld\n",
> PTR_ERR(conf->config));
> --
> 2.11.0
>
Thanks for your patch,
Moritz
["signature.asc" (application/pgp-signature)]
--
To unsubscribe from this list: send the line "unsubscribe linux-fpga" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic