[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-fbdev-users
Subject: [Linux-fbdev-users] Interlaced video with atyfb?
From: Steve <steve () sheddy ! net>
Date: 2002-09-08 10:43:30
[Download RAW message or body]
(My apologies if this has been posted twice)
Hi,
I'm running the 2.4.19 kernel with atyfb on a Mach64VT card.
This all works fine:-
/usr/src/linux# fbset -v
Linux Frame Buffer Device Configuration Version 2.1 (23/06/1999)
(C) Copyright 1995-1999 by Geert Uytterhoeven
Opening frame buffer device `/dev/fb0'
Using current video mode from `/dev/fb0'
mode "640x400-70"
# D: 25.157 MHz, H: 31.446 kHz, V: 69.879 Hz
geometry 640 400 640 3251 8
timings 39751 40 24 39 9 96 2
accel true
rgba 8/0,8/0,8/0,0/0
endmode
but I cannot switch interlaced video on:-
/usr/src/linux# fbset -laced true
ioctl FBIOPUT_VSCREENINFO: Invalid argument
Checking the newsgroups I see other people have similar problems.
Any ideas?
Steve.
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
Linux-fbdev-users mailing list
Linux-fbdev-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic