[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-fbdev
Subject: Re: [PATCH] backlight: pwm_bl: Improve bootloader/kernel device handover
From: Lee Jones <lee.jones () linaro ! org>
Date: 2021-08-19 9:59:29
Message-ID: YR4rgXdHqLzpYfEY () google ! com
[Download RAW message or body]
On Thu, 22 Jul 2021, Daniel Thompson wrote:
> Currently there are (at least) two problems in the way pwm_bl starts
> managing the enable_gpio pin. Both occur when the backlight is initially
> off and the driver finds the pin not already in output mode and, as a
> result, unconditionally switches it to output-mode and asserts the signal.
>
> Problem 1: This could cause the backlight to flicker since, at this stage
> in driver initialisation, we have no idea what the PWM and regulator are
> doing (an unconfigured PWM could easily "rest" at 100% duty cycle).
>
> Problem 2: This will cause us not to correctly honour the
> post_pwm_on_delay (which also risks flickers).
>
> Fix this by moving the code to configure the GPIO output mode until after
> we have examines the handover state. That allows us to initialize
> enable_gpio to off if the backlight is currently off and on if the
> backlight is on.
>
> Reported-by: Marek Vasut <marex@denx.de>
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
> Cc: stable@vger.kernel.org
> Acked-by: Marek Vasut <marex@denx.de>
> Tested-by: Marek Vasut <marex@denx.de>
> ---
> drivers/video/backlight/pwm_bl.c | 54 +++++++++++++++++---------------
> 1 file changed, 28 insertions(+), 26 deletions(-)
Applied, thanks.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic