[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-fbdev
Subject: Re: [RFC 1/3 v3]update web addresses in the kernel
From: "Justin P. Mattock" <justinmattock () gmail ! com>
Date: 2010-09-26 13:42:23
Message-ID: 4C9F4DBF.2020302 () gmail ! com
[Download RAW message or body]
alright(going to top post because of how long this is). I will go and
make the changes and resend it out...
On 09/26/2010 02:43 AM, Finn Thain wrote:
>
> Hi Justin,
>
> Some comments on your latest patch follow.
>
>
> On Fri, 24 Sep 2010, Justin P. Mattock wrote:
>
> > --- a/drivers/ata/pata_it821x.c
> > +++ b/drivers/ata/pata_it821x.c
> > @@ -16,7 +16,7 @@
> > * Based in part on the ITE vendor provided SCSI driver.
> > *
> > * Documentation available from
> > - * http://www.ite.com.tw/pc/IT8212F_V04.pdf
> > + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
>
> The existence of the pdf could be useful information when one needs to
> locate a copy. I think the filename needs to be retained.
>
>
>
> > * Some other documents are NDA.
> > *
> > * The ITE8212 isn't exactly a standard IDE controller. It has two
>
> > diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
> > index a2fa1fe..adb6574 100644
> > --- a/drivers/edac/i82443bxgx_edac.c
> > +++ b/drivers/edac/i82443bxgx_edac.c
> > @@ -12,7 +12,7 @@
> > * 440GX fix by Jason Uhlenkott<juhlenko@akamai.com>.
> > *
> > * Written with reference to 82443BX Host Bridge Datasheet:
> > - * http://www.intel.com/design/chipsets/440/documentation.htm
> > + * http://ark.intel.com/Product.aspx?id=27151
>
> That's the wrong document. It refers to processor number 440 not the *440
> chipsets.
>
> Google offers this link:
> http://download.intel.com/design/chipsets/datashts/29063301.pdf
>
>
> > * references to this document given in [].
> > *
> > * This module doesn't support the 440LX, but it may be possible to
> > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> > index 280c9b5..aec5691 100644
> > --- a/drivers/firmware/Kconfig
> > +++ b/drivers/firmware/Kconfig
> > @@ -74,7 +74,8 @@ config EFI_PCDP
> >
> > You must also enable the appropriate drivers (serial, VGA, etc.)
> >
> > - See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
> > + See DIG64_HCDPv20_042804.pdf available from
> > + <http://www.dig64.org/specifications/>
>
> Can you do the same for IT8212F_V04.pdf above?
>
>
> >
> > config DELL_RBU
> > tristate "BIOS update support for DELL systems via sysfs"
>
> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > index 949326d..f3e9d45 100644
> > --- a/drivers/gpu/drm/drm_modes.c
> > +++ b/drivers/gpu/drm/drm_modes.c
> > @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
> > * according to the hdisplay, vdisplay, vrefresh.
> > * It is based from the VESA(TM) Coordinated Video Timing Generator by
> > * Graham Loveridge April 9, 2003 available at
> > - * http://www.vesa.org/public/CVT/CVTd6r1.xls
> > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> > *
> > * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
> > * What I have done is to translate it by using integer calculation.
>
> > /*
> > * Keymap for ATCom AU-100
> > - * http://www.atcom.cn/En_products_AU100.html
> > + * http://www.atcom.cn/products.html
> > * http://www.packetizer.com/products/au100/
> > * http://www.voip-info.org/wiki/view/AU-100
> > *
> > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> > index c714ca2..5e98430 100644
> > --- a/drivers/input/mouse/Kconfig
> > +++ b/drivers/input/mouse/Kconfig
> > @@ -27,10 +27,7 @@ config MOUSE_PS2
> >
> > Synaptics, ALPS or Elantech TouchPad users might be interested
> > in a specialized Xorg/XFree86 driver at:
> > - <http://w1.894.telia.com/~u89404340/touchpad/index.html>
> > - and a new version of GPM at:
> > - <http://www.geocities.com/dt_or/gpm/gpm.html>
>
>
> This one is in the web archive so it might be a good idea to keep the URL?
>
>
> > - to take advantage of the advanced features of the touchpad.
> > + <http://xorg.freedesktop.org/archive/individual/driver/>
> >
> > If unsure, say Y.
> >
>
> > diff --git a/drivers/media/video/cx23885/cx23885-417.c \
> > b/drivers/media/video/cx23885/cx23885-417.c index abd64e8..43eea3a 100644
> > --- a/drivers/media/video/cx23885/cx23885-417.c
> > +++ b/drivers/media/video/cx23885/cx23885-417.c
> > @@ -7,7 +7,7 @@
> > * (c) 2008 Steven Toth<stoth@linuxtv.org>
> > * - CX23885/7/8 support
> > *
> > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> > + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/),
>
> How about,
>
> + * Includes parts from the ivtv driver<http://sourceforge.net/projects/ivtv/>
>
>
> > *
> > * This program is free software; you can redistribute it and/or modify
> > * it under the terms of the GNU General Public License as published by
> > diff --git a/drivers/media/video/cx88/cx88-blackbird.c \
> > b/drivers/media/video/cx88/cx88-blackbird.c index e46e1ce..821766e 100644
> > --- a/drivers/media/video/cx88/cx88-blackbird.c
> > +++ b/drivers/media/video/cx88/cx88-blackbird.c
> > @@ -9,7 +9,7 @@
> > * (c) 2005-2006 Mauro Carvalho Chehab<mchehab@infradead.org>
> > * - video_ioctl2 conversion
> > *
> > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
> > + * Includes parts from the ivtv driver(http://sourceforge.net/projects/ivtv/),
>
>
> Same here.
>
>
> > *
> > * This program is free software; you can redistribute it and/or modify
> > * it under the terms of the GNU General Public License as published by
>
> > diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
> > index 4d6a64c..8e201b8 100644
> > --- a/drivers/mtd/ftl.c
> > +++ b/drivers/mtd/ftl.c
> > @@ -51,7 +51,7 @@
> >
> > Use of the FTL format for non-PCMCIA applications may be an
> > infringement of these patents. For additional information,
> > - contact M-Systems (http://www.m-sys.com) directly.
> > + contact M-Systems directly. [M-Systems since acquired by Sandisk.].
>
>
> An entire sentence within parentheses is usually written like this:
>
> + contact M-Systems directly. [M-Systems since acquired by Sandisk.]
>
>
> >
> > ======================================================================*/
> > #include<linux/mtd/blktrans.h>
>
> > diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
> > index db1dfc5..48894dc 100644
> > --- a/drivers/mtd/nand/cafe_nand.c
> > +++ b/drivers/mtd/nand/cafe_nand.c
> > @@ -2,7 +2,7 @@
> > * Driver for One Laptop Per Child ?CAF?? controller, aka Marvell 88ALP01
> > *
> > * The data sheet for this device can be found at:
> > - * http://www.marvell.com/products/pcconn/88ALP01.jsp
> > + * http://www.marvell.com/products/pc_connectivity/88alp01/
>
> No, it isn't there any longer. It is here though:
>
> http://wiki.laptop.org/go/Datasheets
>
>
> > *
> > * Copyright ? 2006 Red Hat, Inc.
> > * Copyright ? 2006 David Woodhouse<dwmw2@infradead.org>
> > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> > index 2cc81a5..99fb1f6 100644
> > --- a/drivers/net/Kconfig
> > +++ b/drivers/net/Kconfig
>
> > @@ -1541,7 +1541,7 @@ config FEALNX
> > help
> > Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
> > cards. Specifications and data at
> > - <http://www.myson.com.hk/mtd/datasheet/>.
> > + <http://www.datasheetarchive.com/datasheet-pdf/022/DSA00384882.html>.
>
> Links to the datasheetarchive are probably redundant. We have search
> engines for that. Also, there are three devices supported by this driver
> and your link is only good for one of them, so searching is likely to be
> needed anyway.
>
> The site is actually http://www.myson.com.tw/ but there's no product
> information there any longer. I'd suggest this (also correcting the typo):
>
> - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
> - cards. Specifications and data at
> -<http://www.myson.com.hk/mtd/datasheet/>.
> + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
> + cards.<http://www.myson.com.tw/>
>
>
>
> >
> > config NATSEMI
> > tristate "National Semiconductor DP8381x series PCI Ethernet support"
>
> > http://www.national.com/pf/DP/DP83840A.html
> >
>
> > index c683f77..230158b 100644
> > --- a/drivers/net/pcmcia/3c574_cs.c
> > +++ b/drivers/net/pcmcia/3c574_cs.c
> > @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
> > V. References
> >
> > http://www.scyld.com/expert/NWay.html
> > -http://www.national.com/pf/DP/DP83840.html
> > +http://www.national.com/opf/DP/DP83840A.html#Overview
>
> No need for the "#Overview" anchor.
>
>
> >
> > Thanks to Terry Murphy of 3Com for providing development information for
> > earlier 3Com products.
>
> > diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h
> > index 150511a..45f5323 100644
> > --- a/drivers/net/sis900.h
> > +++ b/drivers/net/sis900.h
> > @@ -7,7 +7,7 @@
> > * preliminary Rev. 1.0 Nov. 10, 1998
> > * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
> > * preliminary Rev. 1.0 Jan. 18, 1998
> > - * http://www.sis.com.tw/support/databook.htm
> > + * http://www.sis.com/elibrary/elibrary_index00.htm
>
> The old URL is in the web archive, complete with the relevant datasheets.
> But if I follow your URL, I get nothing useful.
>
>
> > */
> >
> > /*
>
> > index b0342a5..024fccc 100644
> > --- a/drivers/net/wireless/p54/Kconfig
> > +++ b/drivers/net/wireless/p54/Kconfig
> > @@ -8,7 +8,7 @@ config P54_COMMON
> > also need to be enabled in order to support any devices.
> >
> > These devices require softmac firmware which can be found at
> > - http://prism54.org/
> > + http://wireless.kernel.org/en/users/Drivers/p54
>
>
> The convention seems to be angle brackets around URLS in Kconfig.
>
>
> >
> > If you choose to build a module, it'll be called p54common.
> >
> > @@ -20,7 +20,7 @@ config P54_USB
> > This driver is for USB isl38xx based wireless cards.
> >
> > These devices require softmac firmware which can be found at
> > - http://prism54.org/
> > + http://wireless.kernel.org/en/users/Drivers/p54
>
>
> Same.
>
> >
> > If you choose to build a module, it'll be called p54usb.
> >
> > @@ -34,7 +34,7 @@ config P54_PCI
> > supported by the fullmac driver/firmware.
> >
> > This driver requires softmac firmware which can be found at
> > - http://prism54.org/
> > + http://wireless.kernel.org/en/users/Drivers/p54
> >
> > If you choose to build a module, it'll be called p54pci.
> >
>
> Same.
>
>
> > @@ -205,7 +205,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, \
> > PCI_DEVICE_ID_INTEL_82439TX, quir /*
> > * VIA Apollo KT133 needs PCI latency patch
> > * Made according to a windows driver based patch by George E. Breese
> > - * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
> > + * see PCI Latency Adjust on http://www.georgebreese.com/net/software/#PCI
>
>
> The old link is in the web archive, but yours is also useful.
> Can't we have both?
>
>
> > * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
> > * the info on which Mr Breese based his work.
> > *
>
> > --- a/drivers/scsi/Kconfig
> > +++ b/drivers/scsi/Kconfig
> > @@ -949,7 +949,7 @@ config SCSI_IPS
> > depends on PCI&& SCSI
> > ---help---
> > This is support for the IBM ServeRAID hardware RAID controllers.
> > - See<http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
> > + See<http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
> >
>
> The old URL is in the web archive, complete with downloads. Please keep
> it around as there may be no other way to find that material.
>
>
> > for more information. If this driver does not work correctly
> > without modification please contact the author by email at
> > <ipslinux@adaptec.com>.
>
> > diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
> > index b02bdc6..705f541 100644
> > --- a/drivers/scsi/scsi_debug.c
> > +++ b/drivers/scsi/scsi_debug.c
> > @@ -555,8 +555,8 @@ static int inquiry_evpd_84(unsigned char * arr)
> > static int inquiry_evpd_85(unsigned char * arr)
> > {
> > int num = 0;
> > - const char * na1 = "https://www.kernel.org/config";
> > - const char * na2 = "http://www.kernel.org/log";
> > + const char * na1 = "https://www.kernel.org";
> > + const char * na2 = "http://www.kernel.org";
>
>
> Why? These are deliberately fake, and deliberately different.
>
> BTW, a URL like http://www.kernel.org/ is supposed to have the slash at
> the end.
>
>
> > int plen, olen;
> >
> > arr[num++] = 0x1; /* lu, storage config */
> > diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
> > index 24110f6..41a3ed8 100644
> > --- a/drivers/serial/8250.c
> > +++ b/drivers/serial/8250.c
> > @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
> > /*
> > * Exar ST16C2550 "A2" devices incorrectly detect as
> > * having an EFR, and report an ID of 0x0201. See
> > - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
> > + * http://linux.derkeiler.com/pdf/Mailing-Lists/Kernel/2004-11/4812.pdf
>
>
> This link is better since it has the entire thread:
> http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
>
>
> > */
> > if (autoconfig_read_divisor_id(up) == 0x0201&& size_fifo(up) == 16)
> > return 1;
>
> > diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
> > index 96b9717..b6f77c5 100644
> > --- a/drivers/staging/asus_oled/README
> > +++ b/drivers/staging/asus_oled/README
> > @@ -2,7 +2,7 @@
> > Driver for Asus OLED display present in some Asus laptops.
> >
> > The code of this driver is based on 'asusoled' program taken from
> > - https://launchpad.net/asusoled/. I just wanted to have a simple
> > + http://lapsus.berlios.de/asus_oled.html. I just wanted to have a simple
>
>
> The trailing "." isn't helping. Put it inside angle brackets.
>
>
> > kernel driver for controlling this device, but I didn't know how
> > to do that. Now I know ;) Also, that program can not be used
> > with usbhid loaded, which means no USB mouse/keyboard while
> > diff --git a/drivers/staging/asus_oled/asus_oled.c \
> > b/drivers/staging/asus_oled/asus_oled.c index 5b279fb..1cb2116 100644
> > --- a/drivers/staging/asus_oled/asus_oled.c
> > +++ b/drivers/staging/asus_oled/asus_oled.c
> > @@ -24,7 +24,7 @@
> > *
> > *
> > * Asus OLED support is based on asusoled program taken from
> > - * https://launchpad.net/asusoled/.
> > + * http://lapsus.berlios.de/asus_oled.html.
>
> Same here.
>
>
> > *
> > *
> > */
> > diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c \
> > b/drivers/staging/comedi/drivers/cb_pcimdas.c index ced346a..e4cf861 100644
> > --- a/drivers/staging/comedi/drivers/cb_pcimdas.c
> > +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
> > @@ -37,7 +37,7 @@ Configuration Options:
> > Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
> > Only supports DIO, AO and simple AI in it's present form.
> > No interrupts, multi channel or FIFO AI, although the card looks like it could \
> > support this.
> > -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more \
> > details. +See http://www.mccdaq.com/specs.aspx for more details.
>
> This loses information. Your patch removes the filename. For example,
> Googling that filename gives this:
>
> http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf
>
>
> > */
> >
> > #include "../comedidev.h"
> > diff --git a/drivers/staging/comedi/drivers/daqboard2000.c \
> > b/drivers/staging/comedi/drivers/daqboard2000.c index 6af6c83..ba5a980 100644
> > --- a/drivers/staging/comedi/drivers/daqboard2000.c
> > +++ b/drivers/staging/comedi/drivers/daqboard2000.c
> > @@ -51,7 +51,7 @@ Configuration options:
> > for the card, and here are the findings so far.
> >
> > 1. A good document that describes the PCI interface chip is found at:
> > - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
> > + http://www.plxtech.com/products/io/pci9080
>
>
> Again, googling "9080db-106.pdf" locates the pdf, but it isn't available
> without registration using the link you provided. I suggest that you at
> least keep the filename (see above).
>
> >
> > 2. The initialization done so far is:
> > a. program the FPGA (windows code sans a lot of error messages)
> > diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c \
> > b/drivers/staging/comedi/drivers/ni_mio_common.c index bd16f91..a2691db 100644
> > --- a/drivers/staging/comedi/drivers/ni_mio_common.c
> > +++ b/drivers/staging/comedi/drivers/ni_mio_common.c
> > @@ -34,7 +34,7 @@
> > 340747b.pdf AT-MIO E series Register Level Programmer Manual
> > 341079b.pdf PCI E Series RLPM
> > 340934b.pdf DAQ-STC reference manual
> > - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
> > + 67xx and 611x registers (from http://www.ni.com/pdf/manuals/340934b.pdf)
> > release_ni611x.pdf
> > release_ni67xx.pdf
>
> This is wrong. The URL you provided doesn't offer release_ni611x.pdf or
> release_ni67xx.pdf. Those two documents are here:
> ftp://ftp.ni.com/support/daq/mhddk/documentation/
>
>
> > Other possibly relevant info:
> > diff --git a/drivers/staging/comedi/drivers/plx9080.h \
> > b/drivers/staging/comedi/drivers/plx9080.h index 485d63f..6c14b6b 100644
> > --- a/drivers/staging/comedi/drivers/plx9080.h
> > +++ b/drivers/staging/comedi/drivers/plx9080.h
> > @@ -13,7 +13,7 @@
> > *
> > ********************************************************************
> > *
> > - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
> > + * Copyright (C) 1999 RG Studio s.c.,
>
>
> You could lose the trailing comma.
>
>
> > * Written by Krzysztof Halasa<khc@rgstudio.com.pl>
> > *
> > * Portions (C) SBE Inc., used by permission.
>
> > diff --git a/drivers/staging/quickstart/quickstart.c \
> > b/drivers/staging/quickstart/quickstart.c index 6612247..31b0a13 100644
> > --- a/drivers/staging/quickstart/quickstart.c
> > +++ b/drivers/staging/quickstart/quickstart.c
> > @@ -5,8 +5,7 @@
> > * Copyright (C) 2007-2010 Angelo Arrifano<miknix@gmail.com>
> > *
> > * Information gathered from disassebled dsdt and from here:
> > - * "http://download.microsoft.com/download/9/c/5/
> > - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
> > + * "http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx"
>
>
> Angle brackets would be better than quote marks.
>
>
> > *
> > * This program is free software; you can redistribute it and/or modify
> > * it under the terms of the GNU General Public License as published by
> > diff --git a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig
> > index b5f78b6..fda68f7 100644
> > --- a/drivers/telephony/Kconfig
> > +++ b/drivers/telephony/Kconfig
> > @@ -31,7 +31,7 @@ config PHONE_IXJ
> > isapnp support. Please read<file:Documentation/telephony/ixj.txt>.
> >
> > For more information on these cards, see Quicknet's web site at:
> > - <http://www.quicknet.net/>.
> > + <http://www.qn.net/>.
>
>
> No, Quicknet Technologies (www.quicknet.net in the web archive) is not the
> same as Quicknet, Inc. The URL is in the web archive.
>
>
> >
> > If you do not have any Quicknet telephony cards, you can safely
> > say N here.
> > diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
> > index b53deee..872ee40 100644
> > --- a/drivers/telephony/ixj.c
> > +++ b/drivers/telephony/ixj.c
> > @@ -26,7 +26,7 @@
> > * Daniele Bellucci,<bellucda@tiscali.it>
> > *
> > * More information about the hardware related to this driver can be found
> > - * at our website: http://www.quicknet.net
> > + * at our website: http://www.qn.net/
>
>
> Same.
>
>
> > *
> > * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
> > * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
> > diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h
> > index 4c32a43..c012193 100644
> > --- a/drivers/telephony/ixj.h
> > +++ b/drivers/telephony/ixj.h
> > @@ -22,7 +22,7 @@
> > * Mike Preston,<mpreston@quicknet.net>
> > *
> > * More information about the hardware related to this driver can be found
> > - * at our website: http://www.quicknet.net
> > + * at our website: http://www.qn.net/
>
>
> Same.
>
>
> > *
> > * Fixes:
> > *
> > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> > index 1da73ec..8d3ba1d 100644
> > --- a/drivers/uio/Kconfig
> > +++ b/drivers/uio/Kconfig
> > @@ -19,7 +19,7 @@ config UIO_CIF
> > Driver for Hilscher CIF DeviceNet and Profibus cards. This
> > driver requires a userspace component that handles all of the
> > heavy lifting and can be found at:
> > - http://www.osadl.org/projects/downloads/UIO/user/cif-*
> > + http://www.osadl.org/projects/downloads/UIO/user/
>
>
> The old link is correct. But it can be improved. For example --
>
> - driver requires a userspace component that handles all of the
> - heavy lifting and can be found at:
> - http://www.osadl.org/projects/downloads/UIO/user/cif-*
> + driver requires a userspace component called cif that handles
> + all of the heavy lifting and can be found at:
> + http://www.osadl.org/projects/downloads/UIO/user/
>
>
>
> >
> > To compile this driver as a module, choose M here: the module
> > will be called uio_cif.
> > diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
> > index 916b2b6..fc20f80 100644
> > --- a/drivers/usb/serial/Kconfig
> > +++ b/drivers/usb/serial/Kconfig
> > @@ -264,7 +264,7 @@ config USB_SERIAL_IUU
> > help
> > Say Y here if you want to use a IUU in phoenix mode and get
> > an extra ttyUSBx device. More information available on
> > - http://eczema.ecze.com/iuu_phoenix.html
> > + http://www.opensc-project.org/openct/wiki/wbeiuu
>
>
> The old URL is in the web archive. You don't have to use this IUU driver
> with OpenSC...
>
>
> >
> > To compile this driver as a module, choose M here: the
> > module will be called iuu_phoenix.o
> > @@ -289,7 +289,8 @@ config USB_SERIAL_KEYSPAN
> > and was developed with their support. You must also include
> > firmware to support your particular device(s).
> >
> > - See<http://misc.nu/hugh/keyspan.html> for more information.
> > + See<http://www.carnationsoftware.com/carnation/Keyspan.html>
>
>
> I dunno what Carnation Software has to do with it. Hugh's page moved
> here:
>
> http://blemings.org/hugh/keyspan.html
>
>
>
> > + for more information.
> >
> > To compile this driver as a module, choose M here: the
> > module will be called keyspan.
> > diff --git a/drivers/usb/serial/ftdi_sio_ids.h \
> > b/drivers/usb/serial/ftdi_sio_ids.h index 15a4583..2438ae0 100644
> > --- a/drivers/usb/serial/ftdi_sio_ids.h
> > +++ b/drivers/usb/serial/ftdi_sio_ids.h
> > @@ -335,7 +335,7 @@
> > #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
> >
> > /* ACT Solutions HomePro ZWave interface
> > - (http://www.act-solutions.com/HomePro.htm) */
> > + (http://www.act-solutions.com/index.php) */
>
>
> A better link is,
> http://www.act-solutions.com/HomePro-Product-Matrix.html
>
>
> > #define FTDI_ACTZWAVE_PID 0xF2D0
> >
> > /*
> > @@ -434,7 +434,7 @@
> >
> > /*
> > * PCDJ use ftdi based dj-controllers. The following PID is
> > - * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
> > + * for their DAC-2 device http://pcdj.com/index.php/support/dex_dac_2/
>
>
> That's not the same page. The old one is in the web archive, so no patch
> needed.
>
>
> > * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
> > */
> > #define FTDI_PCDJ_DAC2_PID 0xFA88
>
> > @@ -723,7 +723,7 @@
> >
> > /*
> > * Bayer Ascensia Contour blood glucose meter USB-converter cable.
> > - * http://winglucofacts.com/cables/
> > + * http://www.simplewins.com/Default.aspx
>
>
>
> The old link is valid. Your URL has this:
> http://www.simplewins.com/site/Adults/Monitor/Pages/Bayer-Products/Contour-USB
> but who's to say whether it has the same PID/VID? I don't know...
>
> > */
> > #define BAYER_VID 0x1A79
> > #define BAYER_CONTOUR_CABLE_PID 0x6001
>
>
> > diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
> > index 297163c..9240914 100644
> > --- a/drivers/usb/serial/keyspan.c
> > +++ b/drivers/usb/serial/keyspan.c
> > @@ -9,7 +9,7 @@
> > the Free Software Foundation; either version 2 of the License, or
> > (at your option) any later version.
> >
> > - See http://misc.nu/hugh/keyspan.html for more information.
> > + See http://www.carnationsoftware.com/carnation/Keyspan.html for more \
> > information.
>
>
> As above,
> http://blemings.org/hugh/keyspan.html
>
>
> >
> > Code in this driver inspired by and in a number of places taken
> > from Brian Warner's original Keyspan-PDA driver.
> > diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
> > index bf3297d..f8b6a41 100644
> > --- a/drivers/usb/serial/keyspan.h
> > +++ b/drivers/usb/serial/keyspan.h
> > @@ -9,7 +9,7 @@
> > the Free Software Foundation; either version 2 of the License, or
> > (at your option) any later version.
> >
> > - See http://misc.nu/hugh/keyspan.html for more information.
> > + See http://www.carnationsoftware.com/carnation/Keyspan.html for more \
> > information.
>
>
> http://blemings.org/hugh/keyspan.html
>
>
> >
> > Code in this driver inspired by and in a number of places taken
> > from Brian Warner's original Keyspan-PDA driver.
> > diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
> > index 3a3f5e6..6f773c4 100644
> > --- a/drivers/usb/serial/mct_u232.h
> > +++ b/drivers/usb/serial/mct_u232.h
> > @@ -10,10 +10,10 @@
> > *
> > * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
> > * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
> > - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
> > - * information. The properties of this device are listed at the end of this
> > - * file. This device is available from various distributors. I know Hana,
> > - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
> > + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
> > + * for further information. The properties of this device are listed at the end
> > + * of this file. This device is available from various distributors.
> > + * D-Link, http://www.dlink.com/products/usb/dsbs25.
>
>
> The trailing "." should go. How about this --
>
> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
> + * for further information. The properties of this device are listed at the end
> + * of this file. This device was used in the Dlink DSB-S25.
>
>
> > *
> > * All of the information about the device was acquired by using SniffUSB
> > * on Windows98. The technical details of the reverse engineering are
>
> > diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
> > index 8a372ba..b356e15 100644
> > --- a/drivers/usb/storage/Kconfig
> > +++ b/drivers/usb/storage/Kconfig
> > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> > index 8b31fdf..a07fc57 100644
> > --- a/drivers/video/Kconfig
> > +++ b/drivers/video/Kconfig
> > @@ -1323,7 +1323,7 @@ config FB_RADEON
> > don't need to choose this to run the Radeon in plain VGA mode.
> >
> > There is a product page at
> > - http://apps.ati.com/ATIcompare/
> > + http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx
>
>
> There's no hardware product information at the URL you gave. It is a
> brouchure for AMD's Catalyst software. Here is the URL for the product
> specs:
>
> http://products.amd.com/en-us/GraphicCardResult.aspx
>
>
>
> >
> > config FB_RADEON_I2C
> > bool "DDC/I2C for ATI Radeon support"
> > @@ -1395,7 +1395,7 @@ config FB_ATY_CT
> > Say Y here to support use of ATI's 64-bit Rage boards (or other
> > boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
> > framebuffer device. The ATI product support page for these boards
> > - is at<http://support.ati.com/products/pc/mach64/>.
> > + is at<http://www.amd.com/us/products/technologies/ati-catalyst/Pages/catalyst.aspx>.
> >
>
> Why? Catalyst is not related to Mach64. Here's the URL you want:
>
> http://support.ati.com/products/pc/mach64/mach64.html
>
> You won't find any info at amd.com but at least it works in the web
> archive, which is a huge improvement.
>
>
>
> >
> > config FB_ATY_GENERIC_LCD
> > bool "Mach64 generic LCD support (EXPERIMENTAL)"
>
> > diff --git a/fs/nls/nls_euc-jp.c b/fs/nls/nls_euc-jp.c
> > index 7424929..d7d5526 100644
> > --- a/fs/nls/nls_euc-jp.c
> > +++ b/fs/nls/nls_euc-jp.c
> > @@ -3,7 +3,7 @@
> > *
> > * Added `OSF/JVC Recommended Code Set Conversion Specification
> > * between Japanese EUC and Shift-JIS' support:<hirofumi@mail.parknet.co.jp>
> > - * (http://www.opengroup.or.jp/jvc/cde/sjis-euc-e.html)
> > + * (http://www.opengroup.or.jp/)
>
>
> The document is in the web archive, and not at your URL, so this is
> damage.
>
>
> > */
> >
> > #include<linux/module.h>
>
> > diff --git a/include/crypto/b128ops.h b/include/crypto/b128ops.h
> > index 0b8e6bc..499741c 100644
> > --- a/include/crypto/b128ops.h
> > +++ b/include/crypto/b128ops.h
> > @@ -4,7 +4,7 @@
> > * Copyright (c) 2006, Rik Snel<rsnel@cube.dyndns.org>
> > *
> > * Based on Dr Brian Gladman's (GPL'd) work published at
> > - * http://fp.gladman.plus.com/cryptography_technology/index.htm
> > + * http://www.gladman.me.uk/
>
>
> Well, it doesn't say "Based on Dr Brian Gladman's latest work". The
> original is in the web archive so no patch is needed I think...
>
>
> > * See the original copyright notice below.
> > *
> > * This program is free software; you can redistribute it and/or modify it
> > diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
> > index 4086b8e..7021c6c 100644
> > --- a/include/crypto/gf128mul.h
> > +++ b/include/crypto/gf128mul.h
> > @@ -4,7 +4,7 @@
> > * Copyright (c) 2006 Rik Snel<rsnel@cube.dyndns.org>
> > *
> > * Based on Dr Brian Gladman's (GPL'd) work published at
> > - * http://fp.gladman.plus.com/cryptography_technology/index.htm
> > + * http://www.gladman.me.uk/
>
> Same here.
>
>
> > * See the original copyright notice below.
> > *
> > * This program is free software; you can redistribute it and/or modify it
> > @@ -54,8 +54,8 @@
> >
> > /* Comment by Rik:
> > *
> > - * For some background on GF(2^128) see for example: http://-
> > - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
> > + * For some background on GF(2^128) see for example:
> > + * http://www.cryptobarn.com/papers/gcm-spec.pdf
>
>
> This is the correct URL:
> http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf
>
>
> > *
> > * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
> > * be mapped to computer memory in a variety of ways. Let's examine
>
> > diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
> > index 88b4589..594d871 100644
> > --- a/include/linux/ixjuser.h
> > +++ b/include/linux/ixjuser.h
> > @@ -25,7 +25,7 @@
> > * Mike Preston,<mpreston@quicknet.net>
> > *
> > * More information about the hardware related to this driver can be found
> > - * at our website: http://www.quicknet.net
> > + * at our website: http://www.qn.net/
>
> See above.
>
>
> > *
> > * Fixes:
> > *
> > diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
> > index de24af7..60d73a6 100644
> > --- a/include/linux/n_r3964.h
> > +++ b/include/linux/n_r3964.h
> > @@ -4,7 +4,7 @@
> > * Copyright by
> > * Philips Automation Projects
> > * Kassel (Germany)
> > - * http://www.pap-philips.de
> > + * http://www.pronto.philips.com/index.cfm?id=1292
>
>
> This URL you have provided is certainly pap but otherwise it doesn't
> relate. The URL you removed looks like advertising for a division that
> doesn't exist any longer, apparently spun off as KH-Automaton Projects
> GmbH. I'd remove it too.
>
>
> > * -----------------------------------------------------------
> > * This software may be used and distributed according to the terms of
> > * the GNU General Public License, incorporated herein by reference.
>
> > diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
> > index 571f895..a90050d 100644
> > --- a/net/ipv4/Kconfig
> > +++ b/net/ipv4/Kconfig
> > @@ -84,7 +84,7 @@ config IP_FIB_TRIE
> >
> > An experimental study of compression methods for dynamic tries
> > Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
> > - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
> > + http://www.csc.kth.se/~snilsson/software/dyntrie2/
> >
> > endchoice
> >
> > @@ -555,7 +555,7 @@ config TCP_CONG_VENO
> > distinguishing to circumvent the difficult judgment of the packet loss
> > type. TCP Veno cuts down less congestion window in response to random
> > loss packets.
> > - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
> > + See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
>
> You wouldn't guess from looking at either of these links, but the
> citation is actually this paper:
>
> C.P. Fu and S.C. Liew. "TCP Veno: TCP Enhancement for Transmission
> Over wireless Access Networks," IEEE Journal on Selected Areas in
> Communication, February 2003.
>
>
> >
> > config TCP_CONG_YEAH
> > tristate "YeAH TCP"
>
> > diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
> > index 1833bdb..d6a784c 100644
> > --- a/net/ipv4/netfilter/Kconfig
> > +++ b/net/ipv4/netfilter/Kconfig
> > @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
> > which can only be viewed through syslog.
> >
> > The appropriate userspace logging daemon (ulogd) may be obtained from
> > - <http://www.gnumonks.org/projects/ulogd/>
> > + <http://www.gnumonks.org/projects/>
>
>
> Well I tried to obtain ulogd there but I couldn't find it.
> It is available here though:
> http://www.netfilter.org/projects/ulogd/index.html
>
>
> >
> > To compile it as a module, choose M here. If unsure, say N.
> >
>
> > diff --git a/net/ipv4/tcp_westwood.c b/net/ipv4/tcp_westwood.c
> > index 20151d6..bbf0e99 100644
> > --- a/net/ipv4/tcp_westwood.c
> > +++ b/net/ipv4/tcp_westwood.c
> > @@ -3,7 +3,7 @@
> > *
> > * Angelo Dell'Aera: author of the first version of TCP Westwood+ in Linux \
> > 2.4
> > *
> > - * Support at http://c3lab.poliba.it/index.php/Westwood
> > + * Support at http://www.cs.ucla.edu/NRL/hpi/tcpw/
>
> I wouldn't think that you'd get support there. It claims to be the
> homepage for a BSD based implementation of TCP Westwood. In anycase,
> google cached the poliba.it link on 19 Sep 2010, so I don't think this
> needs to be patched. Besides, it is also in the web archive.
>
>
> > * Main references in literature:
> > *
> > * - Mascolo S, Casetti, M. Gerla et al.
>
> >
> > The boundaries and the conditions are changed according to RFC793:
> > the packet must intersect the window (i.e. segments may be
> > diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
> > index 456a1b4..e2c5fe9 100644
> > --- a/sound/oss/ac97_codec.c
> > +++ b/sound/oss/ac97_codec.c
> > @@ -22,10 +22,7 @@
> > **************************************************************************
> > *
> > * The Intel Audio Codec '97 specification is available at the Intel
>
> "is available at:"
>
>
> > - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/
> > - *
> > - * The specification itself is currently available at:
> > - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
> > + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
> > *
> > **************************************************************************
> > *
> > diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
> > index c7fba53..deffcc8 100644
> > --- a/sound/pci/ens1370.c
> > +++ b/sound/pci/ens1370.c
> > @@ -22,7 +22,7 @@
> > /* Power-Management-Code ( CONFIG_PM )
> > * for ens1371 only ( FIXME )
> > * derived from cs4281.c, atiixp.c and via82xx.c
> > - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
> > + * using http://www.kernel.org/pub/linux/kernel/people/tiwai/docs/writing-an-alsa-driver/index.html
> >
>
>
> I think this is a better choice:
> http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
>
>
> > * by Kurt J. Bosch
> > */
> >
>
> Thanks.
>
> Finn
>
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic