[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-edac
Subject:    [PATCH v1 4/4] EDAC, skx_edac: Let EDAC core show the decoded result for debugfs
From:       Qiuxu Zhuo <qiuxu.zhuo () intel ! com>
Date:       2018-11-16 7:35:05
Message-ID: 1542353705-13531-1-git-send-email-qiuxu.zhuo () intel ! com
[Download RAW message or body]

Current debugfs in the skx_edac shows the decoded result in its own
print format which is inconvenient for analysis/statistics.

Use skx_mce_check_error() instead of skx_decode() for debugfs,
then the decoded result is showed via EDAC core in a more readable
format as like - CPU_SrcID#[0-9]_MC#[0-9]_Chan#[0-9]_DIMM#[0-9].

Print a warning the first time this interface is used so the
administrator can see the console log that error(s) have been faked.

Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
---
 drivers/edac/skx_edac.c | 94 +++++++++++++++++++++--------------------
 1 file changed, 48 insertions(+), 46 deletions(-)

diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c
index 6d38701c1b2e..93ef161bb5e1 100644
--- a/drivers/edac/skx_edac.c
+++ b/drivers/edac/skx_edac.c
@@ -921,52 +921,6 @@ static bool skx_decode(struct decoded_addr *res)
 		skx_rir_decode(res) && skx_mad_decode(res);
 }
 
-#ifdef CONFIG_EDAC_DEBUG
-/*
- * Debug feature.
- * Exercise the address decode logic by writing an address to
- * /sys/kernel/debug/edac/skx_test/addr.
- */
-static struct dentry *skx_test;
-
-static int debugfs_u64_set(void *data, u64 val)
-{
-	struct decoded_addr res;
-
-	res.addr = val;
-	skx_decode(&res);
-
-	return 0;
-}
-DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
-
-static void setup_skx_debug(void)
-{
-	skx_test = edac_debugfs_create_dir("skx_test");
-	if (!skx_test)
-		return;
-
-	if (!edac_debugfs_create_file("addr", 0200, skx_test,
-				      NULL, &fops_u64_wo)) {
-		debugfs_remove(skx_test);
-		skx_test = NULL;
-	}
-}
-
-static void teardown_skx_debug(void)
-{
-	debugfs_remove_recursive(skx_test);
-}
-#else
-static void setup_skx_debug(void)
-{
-}
-
-static void teardown_skx_debug(void)
-{
-}
-#endif /*CONFIG_EDAC_DEBUG*/
-
 static bool skx_adxl_decode(struct decoded_addr *res)
 
 {
@@ -1171,6 +1125,54 @@ static struct notifier_block skx_mce_dec = {
 	.priority	= MCE_PRIO_EDAC,
 };
 
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature.
+ * Exercise the address decode logic by writing an address to
+ * /sys/kernel/debug/edac/skx_test/addr.
+ */
+static struct dentry *skx_test;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+	struct mce m;
+
+	pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
+
+	memset(&m, 0, sizeof(m));
+	/* ADDRV + MemRd + Unknown channel */
+	m.status = MCI_STATUS_ADDRV + 0x90;
+	/* One corrected error */
+	m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
+	m.addr = val;
+	skx_mce_check_error(NULL, 0, &m);
+
+	return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static void setup_skx_debug(void)
+{
+	skx_test = edac_debugfs_create_dir("skx_test");
+	if (!skx_test)
+		return;
+
+	if (!edac_debugfs_create_file("addr", 0200, skx_test,
+				      NULL, &fops_u64_wo)) {
+		debugfs_remove(skx_test);
+		skx_test = NULL;
+	}
+}
+
+static void teardown_skx_debug(void)
+{
+	debugfs_remove_recursive(skx_test);
+}
+#else
+static void setup_skx_debug(void) {}
+static void teardown_skx_debug(void) {}
+#endif /*CONFIG_EDAC_DEBUG*/
+
 static void skx_remove(void)
 {
 	int i, j;
-- 
2.17.1

[prev in list] [next in list] [prev in thread] [next in thread]