[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-can
Subject: Re: [RFC PATCH] can: sja1000: use common prefix for all sja1000 defines
From: Oliver Hartkopp <socketcan () hartkopp ! net>
Date: 2013-04-05 18:24:55
Message-ID: 515F16F7.7020508 () hartkopp ! net
[Download RAW message or body]
On 05.04.2013 10:00, Marc Kleine-Budde wrote:
> On 04/03/2013 09:51 PM, Oliver Hartkopp wrote:
>> Hello Marc,
>>
>> On 03.04.2013 09:42, Marc Kleine-Budde wrote:
>>
>>
>>> - priv->write_reg(priv, REG_CDR, CDR_PELICAN);
>>> + priv->write_reg(priv, SJA1000_REG_CDR, CDR_PELICAN);
>>
>>
>> What about CDR_PELICAN here?
>
> It's from a different file, IIRC.
Yes, it is.
>>
>>> + priv->write_reg(priv, SJA1000_REG_OCR, priv->ocr | OCR_MODE_NORMAL);
>>
>>
>> and OCR_MODE_NORMAL here?
>
> same here.
>
dito.
But when we add to each register *content* definition the SJA1000_ prefix ...
why not adding this for the OCR and CDR register content too then?
>>
>> All the defines from include/linux/can/platform/sja1000.h are not unified too.
>>
>> What about this patch?
>>
>> I used SJA_ as prefix for all relevant defines - even for SJA1000_ defines:
>
> I like SJA1000_ more then SJA_, but I don't insist on that... :)
Wolfgang too :-)
What about only changing the REG_ defines to SJA1000_ and let the register
content values as-is?
ems_pci.c | 6 +-
ems_pcmcia.c | 6 +-
kvaser_pci.c | 4 -
peak_pci.c | 2
peak_pcmcia.c | 8 +--
plx_pci.c | 12 ++---
sja1000.c | 126 +++++++++++++++++++++++++++++-----------------------------
sja1000.h | 68 +++++++++++++++----------------
8 files changed, 117 insertions(+), 115 deletions(-)
diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index 36d298d..3752342 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -168,12 +168,12 @@ static inline int ems_pci_check_chan(const struct sja1000_priv *priv)
unsigned char res;
/* Make sure SJA1000 is in reset mode */
- priv->write_reg(priv, REG_MOD, 1);
+ priv->write_reg(priv, SJA1000_MOD, 1);
- priv->write_reg(priv, REG_CDR, CDR_PELICAN);
+ priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN);
/* read reset-values */
- res = priv->read_reg(priv, REG_CDR);
+ res = priv->read_reg(priv, SJA1000_CDR);
if (res == CDR_PELICAN)
return 1;
diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c
index 5c2f3fb..a3aa681 100644
--- a/drivers/net/can/sja1000/ems_pcmcia.c
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -126,11 +126,11 @@ static irqreturn_t ems_pcmcia_interrupt(int irq, void *dev_id)
static inline int ems_pcmcia_check_chan(struct sja1000_priv *priv)
{
/* Make sure SJA1000 is in reset mode */
- ems_pcmcia_write_reg(priv, REG_MOD, 1);
- ems_pcmcia_write_reg(priv, REG_CDR, CDR_PELICAN);
+ ems_pcmcia_write_reg(priv, SJA1000_MOD, 1);
+ ems_pcmcia_write_reg(priv, SJA1000_CDR, CDR_PELICAN);
/* read reset-values */
- if (ems_pcmcia_read_reg(priv, REG_CDR) == CDR_PELICAN)
+ if (ems_pcmcia_read_reg(priv, SJA1000_CDR) == CDR_PELICAN)
return 1;
return 0;
diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
index 37b0381..217585b 100644
--- a/drivers/net/can/sja1000/kvaser_pci.c
+++ b/drivers/net/can/sja1000/kvaser_pci.c
@@ -159,9 +159,9 @@ static int number_of_sja1000_chip(void __iomem *base_addr)
for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
/* reset chip */
iowrite8(MOD_RM, base_addr +
- (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+ (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD);
status = ioread8(base_addr +
- (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
+ (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD);
/* check reset bit */
if (!(status & MOD_RM))
break;
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index d1e7f10..6b6f0ad 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -402,7 +402,7 @@ static void peak_pciec_write_reg(const struct sja1000_priv *priv,
int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE;
/* sja1000 register changes control the leds state */
- if (port == REG_MOD)
+ if (port == SJA1000_MOD)
switch (val) {
case MOD_RM:
/* Reset Mode: set led on */
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index 1a7020b..977901a 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -196,7 +196,7 @@ static void pcan_write_canreg(const struct sja1000_priv *priv, int port, u8 v)
int c = (priv->reg_base - card->ioport_addr) / PCC_CHAN_SIZE;
/* sja1000 register changes control the leds state */
- if (port == REG_MOD)
+ if (port == SJA1000_MOD)
switch (v) {
case MOD_RM:
/* Reset Mode: set led on */
@@ -509,11 +509,11 @@ static void pcan_free_channels(struct pcan_pccard *card)
static inline int pcan_channel_present(struct sja1000_priv *priv)
{
/* make sure SJA1000 is in reset mode */
- pcan_write_canreg(priv, REG_MOD, 1);
- pcan_write_canreg(priv, REG_CDR, CDR_PELICAN);
+ pcan_write_canreg(priv, SJA1000_MOD, 1);
+ pcan_write_canreg(priv, SJA1000_CDR, CDR_PELICAN);
/* read reset-values */
- if (pcan_read_canreg(priv, REG_CDR) == CDR_PELICAN)
+ if (pcan_read_canreg(priv, SJA1000_CDR) == CDR_PELICAN)
return 1;
return 0;
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 3c18d7d..c52c1e9 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -348,20 +348,20 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
- (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
- (priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
+ (priv->read_reg(priv, SJA1000_SR) == REG_SR_BASICCAN_INITIAL) &&
+ (priv->read_reg(priv, SJA1000_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
/* Bring the SJA1000 into the PeliCAN mode*/
- priv->write_reg(priv, REG_CDR, CDR_PELICAN);
+ priv->write_reg(priv, SJA1000_CDR, CDR_PELICAN);
/*
* Check registers after reset in the PeliCAN mode.
* See states on p. 23 of the Datasheet.
*/
- if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
- priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
- priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
+ if (priv->read_reg(priv, SJA1000_MOD) == REG_MOD_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_SR) == REG_SR_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_IR) == REG_IR_PELICAN_INITIAL)
return flag;
return 0;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index e4df307..7164a99 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -91,14 +91,14 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
* the write_reg() operation - especially on SMP systems.
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
- priv->write_reg(priv, REG_CMR, val);
- priv->read_reg(priv, SJA1000_REG_SR);
+ priv->write_reg(priv, SJA1000_CMR, val);
+ priv->read_reg(priv, SJA1000_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
static int sja1000_is_absent(struct sja1000_priv *priv)
{
- return (priv->read_reg(priv, REG_MOD) == 0xFF);
+ return (priv->read_reg(priv, SJA1000_MOD) == 0xFF);
}
static int sja1000_probe_chip(struct net_device *dev)
@@ -116,11 +116,11 @@ static int sja1000_probe_chip(struct net_device *dev)
static void set_reset_mode(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- unsigned char status = priv->read_reg(priv, REG_MOD);
+ unsigned char status = priv->read_reg(priv, SJA1000_MOD);
int i;
/* disable interrupts */
- priv->write_reg(priv, REG_IER, IRQ_OFF);
+ priv->write_reg(priv, SJA1000_IER, IRQ_OFF);
for (i = 0; i < 100; i++) {
/* check reset bit */
@@ -129,9 +129,10 @@ static void set_reset_mode(struct net_device *dev)
return;
}
- priv->write_reg(priv, REG_MOD, MOD_RM); /* reset chip */
+ /* reset chip */
+ priv->write_reg(priv, SJA1000_MOD, MOD_RM);
udelay(10);
- status = priv->read_reg(priv, REG_MOD);
+ status = priv->read_reg(priv, SJA1000_MOD);
}
netdev_err(dev, "setting SJA1000 into reset mode failed!\n");
@@ -140,7 +141,7 @@ static void set_reset_mode(struct net_device *dev)
static void set_normal_mode(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- unsigned char status = priv->read_reg(priv, REG_MOD);
+ unsigned char status = priv->read_reg(priv, SJA1000_MOD);
int i;
for (i = 0; i < 100; i++) {
@@ -149,22 +150,22 @@ static void set_normal_mode(struct net_device *dev)
priv->can.state = CAN_STATE_ERROR_ACTIVE;
/* enable interrupts */
if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
- priv->write_reg(priv, REG_IER, IRQ_ALL);
+ priv->write_reg(priv, SJA1000_IER, IRQ_ALL);
else
- priv->write_reg(priv, REG_IER,
+ priv->write_reg(priv, SJA1000_IER,
IRQ_ALL & ~IRQ_BEI);
return;
}
/* set chip to normal mode */
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
- priv->write_reg(priv, REG_MOD, MOD_LOM);
+ priv->write_reg(priv, SJA1000_MOD, MOD_LOM);
else
- priv->write_reg(priv, REG_MOD, 0x00);
+ priv->write_reg(priv, SJA1000_MOD, 0x00);
udelay(10);
- status = priv->read_reg(priv, REG_MOD);
+ status = priv->read_reg(priv, SJA1000_MOD);
}
netdev_err(dev, "setting SJA1000 into normal mode failed!\n");
@@ -179,9 +180,9 @@ static void sja1000_start(struct net_device *dev)
set_reset_mode(dev);
/* Clear error counters and error code capture */
- priv->write_reg(priv, REG_TXERR, 0x0);
- priv->write_reg(priv, REG_RXERR, 0x0);
- priv->read_reg(priv, REG_ECC);
+ priv->write_reg(priv, SJA1000_TXERR, 0x0);
+ priv->write_reg(priv, SJA1000_RXERR, 0x0);
+ priv->read_reg(priv, SJA1000_ECC);
/* leave reset mode */
set_normal_mode(dev);
@@ -217,8 +218,8 @@ static int sja1000_set_bittiming(struct net_device *dev)
netdev_info(dev, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0, btr1);
- priv->write_reg(priv, REG_BTR0, btr0);
- priv->write_reg(priv, REG_BTR1, btr1);
+ priv->write_reg(priv, SJA1000_BTR0, btr0);
+ priv->write_reg(priv, SJA1000_BTR1, btr1);
return 0;
}
@@ -228,8 +229,8 @@ static int sja1000_get_berr_counter(const struct net_device *dev,
{
struct sja1000_priv *priv = netdev_priv(dev);
- bec->txerr = priv->read_reg(priv, REG_TXERR);
- bec->rxerr = priv->read_reg(priv, REG_RXERR);
+ bec->txerr = priv->read_reg(priv, SJA1000_TXERR);
+ bec->rxerr = priv->read_reg(priv, SJA1000_RXERR);
return 0;
}
@@ -247,20 +248,20 @@ static void chipset_init(struct net_device *dev)
struct sja1000_priv *priv = netdev_priv(dev);
/* set clock divider and output control register */
- priv->write_reg(priv, REG_CDR, priv->cdr | CDR_PELICAN);
+ priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
/* set acceptance filter (accept all) */
- priv->write_reg(priv, REG_ACCC0, 0x00);
- priv->write_reg(priv, REG_ACCC1, 0x00);
- priv->write_reg(priv, REG_ACCC2, 0x00);
- priv->write_reg(priv, REG_ACCC3, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC0, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC1, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC2, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC3, 0x00);
- priv->write_reg(priv, REG_ACCM0, 0xFF);
- priv->write_reg(priv, REG_ACCM1, 0xFF);
- priv->write_reg(priv, REG_ACCM2, 0xFF);
- priv->write_reg(priv, REG_ACCM3, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
- priv->write_reg(priv, REG_OCR, priv->ocr | OCR_MODE_NORMAL);
+ priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
}
/*
@@ -289,21 +290,21 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
id = cf->can_id;
if (id & CAN_RTR_FLAG)
- fi |= FI_RTR;
+ fi |= SJA1000_FI_RTR;
if (id & CAN_EFF_FLAG) {
- fi |= FI_FF;
- dreg = EFF_BUF;
- priv->write_reg(priv, REG_FI, fi);
- priv->write_reg(priv, REG_ID1, (id & 0x1fe00000) >> (5 + 16));
- priv->write_reg(priv, REG_ID2, (id & 0x001fe000) >> (5 + 8));
- priv->write_reg(priv, REG_ID3, (id & 0x00001fe0) >> 5);
- priv->write_reg(priv, REG_ID4, (id & 0x0000001f) << 3);
+ fi |= SJA1000_FI_FF;
+ dreg = SJA1000_EFF_BUF;
+ priv->write_reg(priv, SJA1000_FI, fi);
+ priv->write_reg(priv, SJA1000_ID1, (id & 0x1fe00000) >> 21);
+ priv->write_reg(priv, SJA1000_ID2, (id & 0x001fe000) >> 13);
+ priv->write_reg(priv, SJA1000_ID3, (id & 0x00001fe0) >> 5);
+ priv->write_reg(priv, SJA1000_ID4, (id & 0x0000001f) << 3);
} else {
- dreg = SFF_BUF;
- priv->write_reg(priv, REG_FI, fi);
- priv->write_reg(priv, REG_ID1, (id & 0x000007f8) >> 3);
- priv->write_reg(priv, REG_ID2, (id & 0x00000007) << 5);
+ dreg = SJA1000_SFF_BUF;
+ priv->write_reg(priv, SJA1000_FI, fi);
+ priv->write_reg(priv, SJA1000_ID1, (id & 0x000007f8) >> 3);
+ priv->write_reg(priv, SJA1000_ID2, (id & 0x00000007) << 5);
}
for (i = 0; i < dlc; i++)
@@ -335,25 +336,25 @@ static void sja1000_rx(struct net_device *dev)
if (skb == NULL)
return;
- fi = priv->read_reg(priv, REG_FI);
+ fi = priv->read_reg(priv, SJA1000_FI);
- if (fi & FI_FF) {
+ if (fi & SJA1000_FI_FF) {
/* extended frame format (EFF) */
- dreg = EFF_BUF;
- id = (priv->read_reg(priv, REG_ID1) << (5 + 16))
- | (priv->read_reg(priv, REG_ID2) << (5 + 8))
- | (priv->read_reg(priv, REG_ID3) << 5)
- | (priv->read_reg(priv, REG_ID4) >> 3);
+ dreg = SJA1000_EFF_BUF;
+ id = (priv->read_reg(priv, SJA1000_ID1) << 21)
+ | (priv->read_reg(priv, SJA1000_ID2) << 13)
+ | (priv->read_reg(priv, SJA1000_ID3) << 5)
+ | (priv->read_reg(priv, SJA1000_ID4) >> 3);
id |= CAN_EFF_FLAG;
} else {
/* standard frame format (SFF) */
- dreg = SFF_BUF;
- id = (priv->read_reg(priv, REG_ID1) << 3)
- | (priv->read_reg(priv, REG_ID2) >> 5);
+ dreg = SJA1000_SFF_BUF;
+ id = (priv->read_reg(priv, SJA1000_ID1) << 3)
+ | (priv->read_reg(priv, SJA1000_ID2) >> 5);
}
cf->can_dlc = get_can_dlc(fi & 0x0F);
- if (fi & FI_RTR) {
+ if (fi & SJA1000_FI_RTR) {
id |= CAN_RTR_FLAG;
} else {
for (i = 0; i < cf->can_dlc; i++)
@@ -414,7 +415,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
priv->can.can_stats.bus_error++;
stats->rx_errors++;
- ecc = priv->read_reg(priv, REG_ECC);
+ ecc = priv->read_reg(priv, SJA1000_ECC);
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
@@ -448,7 +449,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
if (isrc & IRQ_ALI) {
/* arbitration lost interrupt */
netdev_dbg(dev, "arbitration lost interrupt\n");
- alc = priv->read_reg(priv, REG_ALC);
+ alc = priv->read_reg(priv, SJA1000_ALC);
priv->can.can_stats.arbitration_lost++;
stats->tx_errors++;
cf->can_id |= CAN_ERR_LOSTARB;
@@ -457,8 +458,8 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING ||
state == CAN_STATE_ERROR_PASSIVE)) {
- uint8_t rxerr = priv->read_reg(priv, REG_RXERR);
- uint8_t txerr = priv->read_reg(priv, REG_TXERR);
+ uint8_t rxerr = priv->read_reg(priv, SJA1000_RXERR);
+ uint8_t txerr = priv->read_reg(priv, SJA1000_TXERR);
cf->can_id |= CAN_ERR_CRTL;
if (state == CAN_STATE_ERROR_WARNING) {
priv->can.can_stats.error_warning++;
@@ -494,15 +495,16 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
int n = 0;
/* Shared interrupts and IRQ off? */
- if (priv->read_reg(priv, REG_IER) == IRQ_OFF)
+ if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
return IRQ_NONE;
if (priv->pre_irq)
priv->pre_irq(priv);
- while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
+ while ((isrc = priv->read_reg(priv, SJA1000_IR)) &&
+ (n < SJA1000_MAX_IRQ)) {
n++;
- status = priv->read_reg(priv, SJA1000_REG_SR);
+ status = priv->read_reg(priv, SJA1000_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
@@ -519,7 +521,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
} else {
/* transmission complete */
stats->tx_bytes +=
- priv->read_reg(priv, REG_FI) & 0xf;
+ priv->read_reg(priv, SJA1000_FI) & 0xf;
stats->tx_packets++;
can_get_echo_skb(dev, 0);
}
@@ -530,7 +532,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
- status = priv->read_reg(priv, SJA1000_REG_SR);
+ status = priv->read_reg(priv, SJA1000_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index aa48e05..fcb9aef 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -54,46 +54,46 @@
#define SJA1000_MAX_IRQ 20 /* max. number of interrupts handled in ISR */
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
-#define REG_MOD 0x00
-#define REG_CMR 0x01
-#define SJA1000_REG_SR 0x02
-#define REG_IR 0x03
-#define REG_IER 0x04
-#define REG_ALC 0x0B
-#define REG_ECC 0x0C
-#define REG_EWL 0x0D
-#define REG_RXERR 0x0E
-#define REG_TXERR 0x0F
-#define REG_ACCC0 0x10
-#define REG_ACCC1 0x11
-#define REG_ACCC2 0x12
-#define REG_ACCC3 0x13
-#define REG_ACCM0 0x14
-#define REG_ACCM1 0x15
-#define REG_ACCM2 0x16
-#define REG_ACCM3 0x17
-#define REG_RMC 0x1D
-#define REG_RBSA 0x1E
+#define SJA1000_MOD 0x00
+#define SJA1000_CMR 0x01
+#define SJA1000_SR 0x02
+#define SJA1000_IR 0x03
+#define SJA1000_IER 0x04
+#define SJA1000_ALC 0x0B
+#define SJA1000_ECC 0x0C
+#define SJA1000_EWL 0x0D
+#define SJA1000_RXERR 0x0E
+#define SJA1000_TXERR 0x0F
+#define SJA1000_ACCC0 0x10
+#define SJA1000_ACCC1 0x11
+#define SJA1000_ACCC2 0x12
+#define SJA1000_ACCC3 0x13
+#define SJA1000_ACCM0 0x14
+#define SJA1000_ACCM1 0x15
+#define SJA1000_ACCM2 0x16
+#define SJA1000_ACCM3 0x17
+#define SJA1000_RMC 0x1D
+#define SJA1000_RBSA 0x1E
/* Common registers - manual section 6.5 */
-#define REG_BTR0 0x06
-#define REG_BTR1 0x07
-#define REG_OCR 0x08
-#define REG_CDR 0x1F
+#define SJA1000_BTR0 0x06
+#define SJA1000_BTR1 0x07
+#define SJA1000_OCR 0x08
+#define SJA1000_CDR 0x1F
-#define REG_FI 0x10
-#define SFF_BUF 0x13
-#define EFF_BUF 0x15
+#define SJA1000_FI 0x10
+#define SJA1000_SFF_BUF 0x13
+#define SJA1000_EFF_BUF 0x15
-#define FI_FF 0x80
-#define FI_RTR 0x40
+#define SJA1000_FI_FF 0x80
+#define SJA1000_FI_RTR 0x40
-#define REG_ID1 0x11
-#define REG_ID2 0x12
-#define REG_ID3 0x13
-#define REG_ID4 0x14
+#define SJA1000_ID1 0x11
+#define SJA1000_ID2 0x12
+#define SJA1000_ID3 0x13
+#define SJA1000_ID4 0x14
-#define CAN_RAM 0x20
+#define SJA1000_CAN_RAM 0x20
/* mode register */
#define MOD_RM 0x01
--
To unsubscribe from this list: send the line "unsubscribe linux-can" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic