[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-can
Subject: RE: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board
From: "Muhammad Ghias" <mghias () connecttech ! com>
Date: 2012-10-17 18:42:12
Message-ID: 036301cdac97$1ee892d0$5cb9b870$ () connecttech ! com
[Download RAW message or body]
Hi Marc,
I tested the patch v2 with kernel 3.6.1 and 3.7-rc1. Clean compile and works
with hardware.
Regards,
Muhammad
-----Original Message-----
From: Marc Kleine-Budde [mailto:mkl@pengutronix.de]
Sent: October-17-12 6:13 AM
To: Muhammad Ghias
Cc: 'Wolfgang Grandegger'; linux-kernel@vger.kernel.org;
linux-can@vger.kernel.org
Subject: Re: [PATCH] CAN: sja1000: Add support for Connect Tech Inc's
Canpro/104-Plus Opto CAN board
On 10/16/2012 11:03 PM, Muhammad Ghias wrote:
> Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030
> bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested
> with kernel 3.6.1.
>
> If you have any questions or any feedback please let me know.
Thanks, the code looks good. Please try, if possible, to send your
patches via git send-email, as outlooks messed up the patch. I've fixed
all line wrapping problems by hand, applied the patch and send a v2,
please test.
regards, Marc
P.S.: Please use the linux-can@vger.kernel.org mailing list for CAN
related patches/topics.
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
--
To unsubscribe from this list: send the line "unsubscribe linux-can" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic