[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-bluetooth
Subject:    [PATCH v4 3/3] arm64: dts: allwinner: a64: Enable Bluetooth on Teres-I
From:       Hugo Grostabussiat <bonstra () bonstra ! fr ! eu ! org>
Date:       2019-11-30 20:23:14
Message-ID: 20191130202314.142096-4-bonstra () bonstra ! fr ! eu ! org
[Download RAW message or body]

The UART1 on the Teres-A64-I is connected to a rtl8723bs combo
WLAN/Bluetooth controller, with three GPIOs used for device reset,
host wake up and device wake up.

Currently, the host wake up feature is not supported by the HCI H5
driver.

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
---
 .../boot/dts/allwinner/sun50i-a64-teres-i.dts      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts \
b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index \
                1069e7012c9c..b28e6d7cb227 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -325,6 +325,20 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		powerdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		device-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		firmware-name = "rtl8723bs_config-teres_a64_i.bin";
+	};
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
-- 
2.24.0


[prev in list] [next in list] [prev in thread] [next in thread]