[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-block
Subject: [PATCH V15 17/22] mmc: block: Reduce polling timeout from 10 minutes to 10 seconds
From: Adrian Hunter <adrian.hunter () intel ! com>
Date: 2017-11-29 13:41:14
Message-ID: 1511962879-24262-18-git-send-email-adrian.hunter () intel ! com
[Download RAW message or body]
Set a 10 second timeout for polling write request busy state. Note, mmc
core is setting a 3 second timeout for SD cards, and SDHCI has long had a
10 second software timer to timeout the whole request, so 10 seconds should
be ample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/core/block.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 46e63aec1fcb..9d323ed34f82 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -63,7 +63,13 @@
#endif
#define MODULE_PARAM_PREFIX "mmcblk."
-#define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
+/*
+ * Set a 10 second timeout for polling write request busy state. Note, mmc core
+ * is setting a 3 second timeout for SD cards, and SDHCI has long had a 10
+ * second software timer to timeout the whole request, so 10 seconds should be
+ * ample.
+ */
+#define MMC_BLK_TIMEOUT_MS (10 * 1000)
#define MMC_SANITIZE_REQ_TIMEOUT 240000
#define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
--
1.9.1
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic