[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-arm-kernel
Subject: [PATCH v2 0/6] brcmstb: add EP regulators and panic handler
From: Jim Quinlan <james.quinlan () broadcom ! com>
Date: 2020-11-30 21:11:37
Message-ID: 20201130211145.3012-1-james.quinlan () broadcom ! com
[Download RAW message or body]
[Attachment #2 (multipart/signed)]
v2 -- Use regulator bulk API rather than multiple calls (MarkB).
v1 -- Bindings are added for fixed regulators that may power the EP device.
-- The brcmstb RC driver is modified to control these regulators
during probe, suspend, and resume.
-- 7216 type SOCs have additional error reporting HW and a
panic handler is added to dump its info.
-- A missing return value check is added.
Jim Quinlan (6):
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
PCI: brcmstb: Add control of EP voltage regulator(s)
PCI: brcmstb: Do not turn off regulators if EP can wake up
PCI: brcmstb: Give 7216 SOCs their own config type
PCI: brcmstb: Add panic/die handler to RC driver
PCI: brcmstb: check return value of clk_prepare_enable()
.../bindings/pci/brcm,stb-pcie.yaml | 12 +
drivers/pci/controller/pcie-brcmstb.c | 219 +++++++++++++++++-
2 files changed, 228 insertions(+), 3 deletions(-)
--
2.17.1
["smime.p7s" (application/pkcs7-signature)]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic