[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-arm-kernel
Subject: [PATCH 2/2] ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
From: Florian Fainelli <f.fainelli () gmail ! com>
Date: 2019-05-31 17:41:29
Message-ID: 20190531174129.6974-3-f.fainelli () gmail ! com
[Download RAW message or body]
From: Doug Berger <opendmb@gmail.com>
ARCH_BRCMSTB needs to use the BCM2835 pin controller for chips like
BCM7211 which adopted that pin controller for GPIO.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/mach-bcm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 9c51d9d0aa68..31065c9a6936 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -219,6 +219,7 @@ config ARCH_BRCMSTB
select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
+ select PINCTRL
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic