[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-arm-kernel
Subject: Re: [PATCH 5/9] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end
From: Tony Lindgren <tony () atomide ! com>
Date: 2012-08-31 23:52:12
Message-ID: 20120831235212.GS1303 () atomide ! com
[Download RAW message or body]
* Tony Lindgren <tony@atomide.com> [120830 17:53]:
> We can't use hardcoded interrupts for SPARSE_IRQ, and can replace
> the hardcoded gpio_base with twl_gpiochip.base after it's been
> allocated.
...
> --- a/include/linux/mfd/twl6040.h
> +++ b/include/linux/mfd/twl6040.h
> @@ -194,7 +194,6 @@ struct twl6040_vibra_data {
>
> struct twl6040_platform_data {
> int audpwron_gpio; /* audio power-on gpio */
> - unsigned int irq_base;
>
> struct twl6040_codec_data *codec;
> struct twl6040_vibra_data *vibra;
The platform_data irq_base is not being used it seems..
> @@ -222,7 +221,6 @@ struct twl6040 {
> unsigned int mclk;
>
> unsigned int irq;
> - unsigned int irq_base;
> u8 irq_masks_cur;
> u8 irq_masks_cache;
> };
..but irq_base here is still in use as that's where the value from
irq_alloc_descs() is being stored to. So I'll drop the changes to
struct twl6040 from this patch as otherwise twl6040 code won't compile.
Turns out I did not have twl6040 selected in any of the testconfigs
that I ran.
Regards,
Tony
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic