[prev in list] [next in list] [prev in thread] [next in thread]
List: linaro-kernel
Subject: Re: [PATCH 4/7] arm64: dts: qcom: sm8x50: add empty thermal zone nodes
From: Amit Kucheria <amit.kucheria () verdurent ! com>
Date: 2020-06-08 8:57:55
Message-ID: CAHLCerM1HN8kC7inh55Zj+bT5WPijkexheHJshKf4oKaKgRfqg () mail ! gmail ! com
[Download RAW message or body]
On Thu, Jun 4, 2020 at 6:13 AM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> Add empty thermal_zone nodes. They will be populated by PMIC dtsi files,
> describing thermal sensors and trip points for zones handled by PMICs.
This is unnecessary. I've already started preparing patches that add
the thermal zones for the two socs.
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 3 +++
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 +++
> 2 files changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 141c21dfa68c..869a54352d77 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -857,6 +857,9 @@ cpufreq_hw: cpufreq@18323000 {
> };
> };
>
> + thermal_zones: thermal-zones {
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 9dd27aecdfda..972d8e04c8a2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -1736,6 +1736,9 @@ cpufreq_hw: cpufreq@18591000 {
> };
> };
>
> + thermal_zones: thermal-zones {
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 13
> --
> 2.26.2
>
_______________________________________________
linaro-kernel mailing list
linaro-kernel@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/linaro-kernel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic