[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linaro-kernel
Subject:    [PATCH 04/11] tty/serial/core: Introduce poll_init callback
From:       anton.vorontsov () linaro ! org (Anton Vorontsov)
Date:       2012-09-24 21:27:53
Message-ID: 1348522080-32629-4-git-send-email-anton.vorontsov () linaro ! org
[Download RAW message or body]

It was noticed that polling drivers (like KGDB) are not able to use
serial ports if the ports were not previously initialized via console.
I.e.  when booting with console=ttyAMA0 kgdboc=ttyAMA0, everything works
fine, but with console=ttyFOO kgdboc=ttyAMA0, the kgdboc doesn't work.

This is because we don't initialize the hardware. Calling ->startup() is
not an option, because drivers request interrupts there, and drivers
fail to handle situations when tty isn't opened with interrupts enabled.

So, we have to implement a new callback (actually, tty_ops already have
a similar callback), which does everything needed to initialize just the
hardware.

Signed-off-by: Anton Vorontsov <anton.vorontsov at linaro.org>
Acked-by: Alan Cox <alan at linux.intel.com>
---
 drivers/tty/serial/serial_core.c | 17 +++++++++++++++++
 include/linux/serial_core.h      |  1 +
 2 files changed, 18 insertions(+)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 78036c5..0fcfd98a 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2129,6 +2129,7 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
+	int ret;
 
 	if (!state || !state->uart_port)
 		return -1;
@@ -2137,6 +2138,22 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
 	if (!(port->ops->poll_get_char && port->ops->poll_put_char))
 		return -1;
 
+	if (port->ops->poll_init) {
+		struct tty_port *tport = &state->port;
+
+		ret = 0;
+		mutex_lock(&tport->mutex);
+		/*
+		 * We don't set ASYNCB_INITIALIZED as we only initialized the
+		 * hw, e.g. state->xmit is still uninitialized.
+		 */
+		if (!test_bit(ASYNCB_INITIALIZED, &tport->flags))
+			ret = port->ops->poll_init(port);
+		mutex_unlock(&tport->mutex);
+		if (ret)
+			return ret;
+	}
+
 	if (options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 		return uart_set_options(port, NULL, baud, parity, bits, flow);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 7cf0b68..822c887 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -274,6 +274,7 @@ struct uart_ops {
 	int		(*verify_port)(struct uart_port *, struct serial_struct *);
 	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
 #ifdef CONFIG_CONSOLE_POLL
+	int		(*poll_init)(struct uart_port *);
 	void	(*poll_put_char)(struct uart_port *, unsigned char);
 	int		(*poll_get_char)(struct uart_port *);
 #endif
-- 
1.7.12



[prev in list] [next in list] [prev in thread] [next in thread]