[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linaro-dev
Subject:    [RFC PATCH 3/4] ARM: Exynos4: Enable thermal sensor driver for origen board
From:       kmpark () infradead ! org (Kyungmin Park)
Date:       2011-10-27 8:11:52
Message-ID: CAH9JG2VxHaMHh2m5b2bMXRSu4Pb=GxZjRAxSx7ZN+YAk29q9+w () mail ! gmail ! com
[Download RAW message or body]

Please split the two patches.
1. Add TMU Kconfig
2. board support

On Wed, Oct 26, 2011 at 8:36 PM, Amit Daniel Kachhap
<amit.kachhap at linaro.org> wrote:
> Signed-off-by: Amit Daniel Kachhap <amit.kachhap at linaro.org>
> ---
> ?arch/arm/mach-exynos4/Kconfig ? ? ? | ? ?5 +++++
> ?arch/arm/mach-exynos4/mach-origen.c | ? 10 ++++++++++
> ?2 files changed, 15 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index cf467b5..786fdb7 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -108,6 +108,11 @@ config EXYNOS4_SETUP_USB_PHY
> ? ? ? ?help
> ? ? ? ? ?Common setup code for USB PHY controller
>
> +config EXYNOS4_THERMAL
> + ? ? ? bool
> + ? ? ? depends on SENSORS_EXYNOS4_TMU
> + ? ? ? default y
> +
> ?# machine support
>
> ?menu "EXYNOS4 Machines"
> diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
> index ed59f86..089b0e3 100644
> --- a/arch/arm/mach-exynos4/mach-origen.c
> +++ b/arch/arm/mach-exynos4/mach-origen.c
> @@ -24,6 +24,10 @@
> ?#include <plat/devs.h>
> ?#include <plat/sdhci.h>
> ?#include <plat/iic.h>
> +#if defined(CONFIG_EXYNOS4_THERMAL)
Do you this ifdef?
> +#include <mach/exynos4-tmu.h>
> +#include <mach/regs-tmu.h>
> +#endif
>
> ?#include <mach/map.h>
>
> @@ -83,6 +87,9 @@ static struct platform_device *origen_devices[] __initdata = {
> ? ? ? ?&s3c_device_hsmmc2,
> ? ? ? ?&s3c_device_rtc,
> ? ? ? ?&s3c_device_wdt,
> +#ifdef CONFIG_EXYNOS4_THERMAL
If you select the this config at origen kconfig. it's not needed.
> + ? ? ? &exynos4_device_tmu,
> +#endif
> ?};
>
> ?static void __init origen_map_io(void)
> @@ -95,6 +102,9 @@ static void __init origen_map_io(void)
> ?static void __init origen_machine_init(void)
> ?{
> ? ? ? ?s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
> +#ifdef CONFIG_EXYNOS4_THERMAL
> + ? ? ? exynos4_tmu_set_platdata(NULL);
> +#endif
you can use it exynos4_tmu_set_platdata by adding proper ifdef at
header file instead of C file
> ? ? ? ?platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
> ?}
>
> --
> 1.7.1
>
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev at lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>


[prev in list] [next in list] [prev in thread] [next in thread]