[prev in list] [next in list] [prev in thread] [next in thread]
List: libusb-devel
Subject: Re: [libusb] Help understanding filter driver. Libusb or Libusb_win32?
From: Tim Roberts <timr () probo ! com>
Date: 2020-04-01 5:47:44
Message-ID: A6443156-356D-4513-9D08-8E01C0F5C662 () probo ! com
[Download RAW message or body]
On Mar 31, 2020, at 6:13 AM, Jim Flanagan <jrfconsulting@frontier.com> wrote:
>
> So, either we set up a Win 7 system for calibrating, etc. or I thought I would \
> write my own calibration routine for Win 10. In order to initiate a communication \
> link to the device, I was going to use a filter-driver. At the moment I am using \
> libusb-win32 under Win 10 setup as a filter and it works just fine. Since \
> libusb-win32 is a bit old, I thought it might be better to use Libusb-1.0 but I \
> need the filtering capability. Thus my questioning. If you have any suggestions, \
> I would appreciate any advice.
It's hard to argue with success. If libusb_win32 works, why would you switch away \
from it? —
Tim Roberts, timr@probo.com
Providenza & Boekelheide, Inc.
_______________________________________________
libusb-devel mailing list
libusb-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/libusb-devel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic