[prev in list] [next in list] [prev in thread] [next in thread]
List: libreswan-dev
Subject: Re: [Swan-dev] interop-ikev2-strongswan-23-initiator-cp failure
From: Antony Antony <antony () phenome ! org>
Date: 2017-06-29 15:43:58
Message-ID: 20170629154358.ip6rdu45th7dyonh () AntonyAntony ! local
[Download RAW message or body]
On Thu, Jun 29, 2017 at 11:02:03AM -0400, D. Hugh Redelmeier wrote:
> > testing/pluto/interop-ikev2-strongswan-23-initiator-cp failed \
> > road:output-different
>
> +CHILD_SA roadnet-eastnet-ikev2{1} established with SPIs SPISPI_i SPISPI_o and TS \
> 192.0.2.1/32 === 0.0.0.0/0
> I don't think that I did that. What's up?
Probably not! If nothing else changed in the test it is not you.
I think such a difference started to appear since 079395bb66 where the
strongswan versions changed.
However, it is interesting see to you got this as "+" . How did you run this
particuler test? Did you run this test as a stand alone? or with one worker?
I usually see a "-" line such as:
-CHILD_SA westnet-eastnet-ikev2{1} established with SPIs SPISPI
When running concurrently. Then the conclusion was if you run single test
there is a chance such a line would appear on the console. And when you run
in batch, concurrent tests, such a line won't appear on the console.
Here is my run.
http://swantest.libreswan.fi/results/blackswan/2017-06-27-swantest-3.21rc5-5-g0fe17f3- \
master/interop-ikev2-strongswan-26-ke-mismatch-responder/OUTPUT/west.console.diff
Also note I see another difference which is explained as change in version
and need reference output update.
-antony
_______________________________________________
Swan-dev mailing list
Swan-dev@lists.libreswan.org
https://lists.libreswan.org/mailman/listinfo/swan-dev
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic