[prev in list] [next in list] [prev in thread] [next in thread]
List: leaf-user
Subject: [leaf-user] iperf and net4801
From: "Franck" <franck () linuxpourtous ! com>
Date: 2007-07-10 13:35:24
Message-ID: 61461.82.127.101.47.1184074524.squirrel () webmail ! linuxpourtous ! com
[Download RAW message or body]
Hi,
i've little problem with net4801 and network speed. With iperf, max speed
is 30bmps.
PC1 (10.1.1.251) <-> eth1 (10.1.1.254) <-> eth0 (192.168.0.99) <-> PC2
(192.168.0.51)
network is 100Mbps full
iperf from PC1 client to PC2 server :
sudo iperf -c 192.168.0.51 -i 3
------------------------------------------------------------
Client connecting to 192.168.0.51, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 10.1.1.251 port 56225 connected with 192.168.0.51 port 5001
[ 3] 0.0- 3.0 sec 10.4 MBytes 29.0 Mbits/sec
[ 3] 3.0- 6.0 sec 10.4 MBytes 29.0 Mbits/sec
[ 3] 6.0- 9.0 sec 10.4 MBytes 29.0 Mbits/sec
[ 3] 0.0-10.0 sec 34.6 MBytes 29.0 Mbits/sec
I've bering-uclinux 3.0.2 on CF with shorewall for routing
Is it possible to increase network speed because 30 Mbps is very small :(
Perhaps with sysctl ?
All feedbacks are welcome
Regards
Franck
--
http://www.linuxpourtous.com
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic