[prev in list] [next in list] [prev in thread] [next in thread]
List: lartc
Subject: linux tc qdisc pie (aqm) configuration with limited bandwidth
From: Ewa Janczukowicz <janczukowicz.ewa () gmail ! com>
Date: 2016-01-27 16:50:11
Message-ID: CAPTuX4p3b-JA=UTqvLn9m35RAHcXmphxsL9VEzPrk0OUaEQipA () mail ! gmail ! com
[Download RAW message or body]
Hello,
I would like to configure AQM PIE by using tc-qdisc, but at the same
time I would like to limit the bandwidth to 1Mb/s.
I have already used similar configuration with fq_codel, i.e. I have
limited the bandwidth by using htb, and later configured fq_codel for
the leaf class and it worked fine.
So for pie I do:
tc qdisc add dev eth0 handle 1: root htb default 11
tc class add dev eth0 parent 1: classid 1:1 htb rate 1000kbit ceil 1000kbit
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 1000kbit ceil
1000kbit
tc qdisc add dev eth0 parent 1:11 pie
However I get "qdisc uknown" message and for example when I try to
change any arguments of pie, I get an error: Unknown qdisc "pie",
hence option "alpha" is unparsable.
Is it possible to use pie and limit the bandwidth at the same time?
Should I used something else instead of htb to limit the bandwidth?
Thank you in advance for any help.
--
To unsubscribe from this list: send the line "unsubscribe lartc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic