[prev in list] [next in list] [prev in thread] [next in thread]
List: lartc
Subject: Re: [LARTC] newbie: TC[NG] with (256kbit/s down and 768kbit/s up)
From: Andy Furniss <andy.furniss () dsl ! pipex ! com>
Date: 2004-05-05 8:34:35
Message-ID: 4098A71B.4060401 () dsl ! pipex ! com
[Download RAW message or body]
Andreas Klauer wrote:
> Am Wednesday 28 April 2004 10:42 schrieb Christian Parpart:
>
>>Could someone show me some simple example code for incress+egress
>>shaping for ppp0 (for a router with clients at eth0)?
>
>
> Maybe my script will do: http://www.metamorpher.de/ipshape/
>
> I don't know about 'simple', but I got a script designed for
> routers in general which have to provide masquerading, port
> forwarding and traffic shaping for several clients in the LAN.
> Even if it looks a bit complicated here and there, I think I got
> it well documented, though. It looks pretty similar to what you
> were trying to do.
>
> I created this with the help of LARTC (Howto, Stef's docum.org, and
> of course this list) and it has grown a lot lately :-) You can
> specify the IPs of your clients, and bandwidth will be shared
> in a fair manner among them.
>
> I use HTB, PRIO and SFQ to do that. It works well for me, but I'm
> sure that there is still LOADS of stuff that can be improved.
> I'm always open for suggestions :-)
Nice script - one thing I found was that HTB dequeued packets in pairs -
with MTU 1500 and your 128kbit up this will hurt latency a bit.
The solution was to change from 1 to 0
#define HTB_HYSTERESIS 0 in net/sched/sch_htb.c
Andy.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic