[prev in list] [next in list] [prev in thread] [next in thread] 

List:       kroupware
Subject:    Re: z-push and N900 Mail for Exchange
From:       Alain abbas <alain.abbas () libertech ! fr>
Date:       2010-02-19 22:23:57
Message-ID: 4B7F0F7D.9080308 () libertech ! fr
[Download RAW message or body]

zpush version  must be the 1.2.2 or 1.2.3RC


Alexander Schröter a écrit :
> Am 19.02.2010 23:03, schrieb Thorsten Schnebeck:
> 
> > Am Freitag 19 Februar 2010 21:53:30 schrieb Alexander Schröter:
> > 
> > 
> > > Am 19.02.2010 13:51, schrieb Gavin McCullagh:
> > > 
> > > 
> > 
> > 
> > > But now the sad part ... not working yet :( My phone is a N900 and I am
> > > using the following setup.
> > > 
> > > 
> > What version of z-push have you installed? You can not use the latest 1.3 stuff.
> > You need at least a post-42.2009 N900 firmware. Current firmware is 3.2010.02-8
> > 
> > 
> > 
> Hi current N900 firmware is 3.2010.02-8 so high enough.
> z-push backend I used 1.3 RC2 which I guess is the one you tell me I 
> should not use ... which one is it than?
> 
> > > E-Mail Address: the one specified in kolab for my account
> > > User Name: the username without the domain
> > > 
> > > 
> > wrong, its with domain
> > 
> > 
> Thought so since I had problems loging into imap without domain.
> 
> > 
> > 
> > > Password: according to the user
> > > Domain: my kolab servers maildomain
> > > 
> > > 
> > IIRC this is for z-push only a dummy info.
> > 
> > 
> > 
> > > Server: my kolab server
> > > port 443
> > > 
> > > 
> > if you want to use https you have to fight with nokias certification set-up and \
> > there are some really long threads on maemo.org about this ;-) Please use for a \
> > first try port 80 and http without certs. You can also use openvpn to secure your \
> > client server connection. The N900 has strong openvpn support. 
> > 
> > 
> Ok I tried the non secure connection and I got something about internal 
> error ... which I guess is what you mean with don't use the 1.3 z-push?
> 
> > > and check secure connection
> > > 
> > > But the error I get with this setup is "Error. Either Exchange server
> > > requires secure connection or account is disabled"
> > > 
> > > So I checked my account and well it's enabled. And I got my ca
> > > certificate and installed it on my n900 to make sure its there.
> > > 
> > > But still same error. Can somebody point me in the right direction. I
> > > also thought it might be relvant I am using a 2nd apache setup which I
> > > heard could make some trouble in a couple of situations.
> > > 
> > > 
> > For the first shot use Port 80 and only sync the calendar. Next step are \
> > contacts. Then you have everything kolabbackend supports so far and you can play \
> > with https and certs :-) 
> > 
> will do that ... thanks for the help ... its much appreciated
> 
> > HTH
> > 
> > Thorsten
> > 
> > 
> 
> _______________________________________________
> Kolab-users mailing list
> Kolab-users@kolab.org
> https://kolab.org/mailman/listinfo/kolab-users
> 

_______________________________________________
Kolab-users mailing list
Kolab-users@kolab.org
https://kolab.org/mailman/listinfo/kolab-users


[prev in list] [next in list] [prev in thread] [next in thread]