[prev in list] [next in list] [prev in thread] [next in thread] 

List:       kroupware
Subject:    Re: [Kroupware] Toltec Connector Problem
From:       Dick Kniep <dick.kniep () lindix ! nl>
Date:       2003-12-01 23:11:05
[Download RAW message or body]

Hi List,

I have exactly the many problems with the kolab server and among them the same 
problem as described here. However, whatever I do, it does not go away.

> 1) Check and make absolutely sure about the permission of the keys.

cd /kolab/etc/kolab
ls -l *.pem
-rw-r-----    1 root     kolab-r       672 Oct 15 02:34 cert.pem
-rw-r-----    1 root     kolab-r       887 Oct 15 02:34 key.pem
(This is the actual output from my ls command)

> 2) run
> # /etc/init.d/kolab stop
>            ^^
> # /etc/init.d/kolab start
>            ^^

Yep, done that too (as a matter of fact some 15 times......

Log of imapd.log gives me:
Dec 02 00:03:38 LinServ01 <notice> imapd[13830]: TLS engine: cannot load CA 
data
Dec 02 00:03:38 LinServ01 <error> imapd[13830]: unable to get certificate from 
'/kolab/etc/kolab/cert.pem'
Dec 02 00:03:38 LinServ01 <error> imapd[13830]: TLS engine: cannot load cert/
key data
Dec 02 00:03:38 LinServ01 <error> imapd[13830]: error initializing TLS



But right after the stop/start of the kolab server I also get these messages:


Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn 
2147483654
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: abort_txn: aborting txn 
21474836
54
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn 
2147483655
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mystore: reusing txn 
2147483655
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mycommit: committing txn 
2147483
655
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn 
2147483656
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: abort_txn: aborting txn 
21474836
56
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn 
2147483657
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mystore: reusing txn 
2147483657
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mycommit: committing txn 
2147483
657
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn 
2147483658
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: abort_txn: aborting txn 
21474836
58
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: myfetch: starting txn 
2147483659
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mystore: reusing txn 
2147483659
Dec 01 23:34:05 LinServ01 <debug> imapd[12591]: mycommit: committing txn 
2147483
659
Dec 01 23:35:13 LinServ01 <debug> imapd[12654]: accepted connection
Dec 01 23:35:13 LinServ01 <debug> imapd[12655]: accepted connection

These messages don't feel very healthy, and I haven't got a clue what is going 
on. It looks as though something has been screwed up, and it is trying to 
recover from that.

So if anyone has a clue. Please let us know. We were supposed to install this 
server for professional use, but as it is now, the reliability is way below 
the required level.

Regards,
D.Kniep


_______________________________________________
Kroupware mailing list
Kroupware@mail.kde.org
https://mail.kde.org/mailman/listinfo/kroupware
[prev in list] [next in list] [prev in thread] [next in thread]