[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-linux
Subject: [kde-linux] USB not working with SuSE 10.2
From: Richard Pace <rpace () sbcglobal ! net>
Date: 2006-12-30 1:30:51
Message-ID: 200612291730.51608.rpace () sbcglobal ! net
[Download RAW message or body]
I've reported this to Novell, bug report 231118. I thought I'd check here \
if anyone has experienced this problem. I've installed SuSE 10.2 on a new \
HP Pavilion with AMD Athlon 64 X2 Dual. I had to use boot option ACPI=off \
in order to install. Otherwise, the boot hangs at "Starting udev...". \
After installation of 10.2, I still have to use ACPI=off (does not power \
off at shutdown either, but that's another problem).
Now for the problem. External USB drive is not recogized when plugged into \
USB 2.0 port. External drive has its own power supply. Also, USB memory \
stick is not recognized when plugged into USB port. I know the ports work, \
since I have Windows XP installed as dual boot, and Windows XP has no \
problem recongizing the devices.
There is no /proc/bus/usb define.
lsusb shows no devices. lsmod shows usbcore installed along with ohci_hcd \
and ehci_hcd.
I have attached my startup log which shows some errors with ohci_hcd and \
ehci_hcd. Specifically, these lines appears in the log:
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
....
<7>PCI: Setting latency timer of device 0000:00:10.1 to 64
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver \
(PCI)
....
<4>PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Probably \
buggy MP table. <3>ohci_hcd 0000:00:0b.0: Found HC with no IRQ. Check \
BIOS/PCI 0000:00:0b.0 setup! <3>ohci_hcd 0000:00:0b.0: init 0000:00:0b.0 \
fail, -19 <4>PCI: No IRQ known for interrupt pin B of device 0000:00:0b.1. \
Probably buggy MP table. <3>ehci_hcd 0000:00:0b.1: Found HC with no IRQ. \
Check BIOS/PCI 0000:00:0b.1 setup! <3>ehci_hcd 0000:00:0b.1: init \
0000:00:0b.1 fail, -19
Any suggestions and/or comments appreciated.
--
Regards,
Richard
["bug231118_startup_log.txt" (text/plain)]
Inspecting /boot/System.map-2.6.18.2-34-default
Loaded 23895 symbols from /boot/System.map-2.6.18.2-34-default.
Symbols match kernel version 2.6.18.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Bootdata ok (command line is root=/dev/sda6 vga=0x317 resume=/dev/sda5 \
splash=silent acpi=off) <5>Linux version 2.6.18.2-34-default \
(geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 \
SMP Mon Nov 27 11:46:27 UTC 2006 <6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
<4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007bef0000 (usable)
<4> BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
<4> BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data)
<4> BIOS-e820: 000000007c000000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<6>DMI present.
<6>Scanning NUMA topology in Northbridge 24
<6>Number of nodes 1
<6>Node 0 MemBase 0000000000000000 Limit 000000007bef0000
<7>NUMA: Using 63 for the hash shift.
<6>Using node hash shift of 63
<6>Bootmem setup node 0 0000000000000000-000000007bef0000
<7>On node 0 totalpages: 499545
<7> DMA zone: 2893 pages, LIFO batch:0
<7> DMA32 zone: 496652 pages, LIFO batch:31
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<4>Intel MultiProcessor Specification v1.4
<6> Virtual Wire compatibility mode.
<6>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<6>Processor #0 15:11 APIC version 17
<6>Processor #1 15:11 APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<6>Setting APIC routing to physical flat
<6>Processors: 2
<6>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
<6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
<4>Built 1 zonelists. Total pages: 499545
<5>Kernel command line: root=/dev/sda6 vga=0x317 resume=/dev/sda5 \
splash=silent acpi=off <6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
<6>time.c: Detected 2004.214 MHz processor.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Checking aperture...
<4>CPU 0: aperture @ 7e000000 size 32 MB
<4>Aperture too small (32 MB)
<4>No AGP bridge found
<4>Memory: 1991528k/2030528k available (1915k kernel code, 38612k reserved, \
1278k data, 188k init) <4>Calibrating delay using timer specific routine.. \
4014.40 BogoMIPS (lpj=8028815) <6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 0/0 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>SMP alternatives: switching to UP code
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 3392k freed
<4>ExtINT not setup in hardware but reported by MP table
<6>Using IO-APIC 2
<6>Using local APIC timer interrupts.
<4>result 12526353
<6>Detected 12.526 MHz APIC timer.
<6>SMP alternatives: switching to SMP code
<6>Booting processor 1/2 APIC 0x1
<4>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 4008.63 BogoMIPS \
(lpj=8017269) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 \
bytes/line) <6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 1/1 -> Node 0
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<4>AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
<6>CPU 1: Syncing TSC to CPU 0.
<6>CPU 1: synchronized TSC with CPU 0 (last diff 21 cycles, maxerr 485 \
cycles) <6>Brought up 2 CPUs
<6>testing NMI watchdog ... OK.
<4>migration_cost=285
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter disabled.
<4>PCI: Probing PCI hardware
<7>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:00:05.0
<6>PCI: Transparent bridge - 0000:00:10.0
<6>PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 5
<6>PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 10
<6>PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 11
<6>PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 7
<6>PCI->APIC IRQ transform: 0000:00:14.0[A] -> IRQ 11
<4>PCI: using PPB 0000:00:10.0[B] to get irq 7
<6>PCI->APIC IRQ transform: 0000:02:05.0[B] -> IRQ 7
<4>PCI: using PPB 0000:00:10.0[B] to get irq 7
<6>PCI->APIC IRQ transform: 0000:02:09.0[B] -> IRQ 7
<6>PCI-DMA: Disabling IOMMU.
<6>PCI: Bridge: 0000:00:04.0
<6> IO window: a000-afff
<6> MEM window: fdd00000-fddfffff
<6> PREFETCH window: fde00000-fdefffff
<6>PCI: Bridge: 0000:00:10.0
<6> IO window: b000-bfff
<6> MEM window: fdc00000-fdcfffff
<6> PREFETCH window: f4000000-f7ffffff
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<7>PCI: Setting latency timer of device 0000:00:10.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>audit: initializing netlink socket (disabled)
<5>audit(1167334419.416:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<4>pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:04.0:pcie00]
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using \
6144k, total 65536k <6>vesafb: mode is 1024x768x16, linelength=2048, \
pages=1 <6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size \
81749 bytes,<6>...found (1024x768, 46202 bytes, v3). <4>Console: switching \
to colour frame buffer device 124x44 <6>fb0: VESA VGA frame buffer device
<6>Real Time Clock Driver v1.12ac
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing \
disabled <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 \
blocksize <6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<6>Freeing unused kernel memory: 188k freed
<4>logips2pp: Detected unknown logitech mouse model 0
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with \
idebus=xx <5>SCSI subsystem initialized
<6>NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
<6>NFORCE-MCP51: chipset revision 161
<6>NFORCE-MCP51: not 100% native mode: will probe irqs later
<6>NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
<7>Probing IDE interface ide0...
<6>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
<4>hda: HL-DT-STDVDRRW GSA-H20L, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>libata version 2.00 loaded.
<7>sata_nv 0000:00:0e.0: version 2.0
<7>PCI: Setting latency timer of device 0000:00:0e.0 to 64
<6>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 10
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 10
<6>scsi0 : sata_nv
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>ata1.00: ATA-7, max UDMA/100, 390721968 sectors: LBA48 NCQ (depth 0/32)
<6>ata1.00: ata1: dev 0 multi count 1
<6>ata1.00: configured for UDMA/100
<6>scsi1 : sata_nv
<6>ata2: SATA link down (SStatus 0 SControl 310)
<4>ATA: abnormal status 0x7F on port 0x977
<5> Vendor: ATA Model: ST3200827AS Rev: 3.AH
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 < sda5 sda6 sda7 >
<5>sd 0:0:0:0: Attached scsi disk sda
<7>PCI: Setting latency timer of device 0000:00:0f.0 to 64
<6>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC800 irq 11
<6>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC808 irq 11
<6>scsi2 : sata_nv
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>ata3: SATA link down (SStatus 0 SControl 310)
<4>ATA: abnormal status 0x7F on port 0x9E7
<6>scsi3 : sata_nv
<6>ata4: SATA link down (SStatus 0 SControl 310)
<4>ATA: abnormal status 0x7F on port 0x967
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<7>Losing some ticks... checking if CPU frequency changed.
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
<7>PCI: Setting latency timer of device 0000:00:14.0 to 64
<6>forcedeth: using HIGHDMA
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>eth0: forcedeth.c: subsystem: 0103c:2a41 bound to 0000:00:14.0
<7>PCI: Setting latency timer of device 0000:00:10.1 to 64
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver \
(PCI) <6>Linux video capture interface: v2.00
<7>ieee1394: Initialized config rom entry `ip1394'
<6>hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>ivtv: ==================== START INIT IVTV ====================
<6>ivtv: version 0.8.0 (tagged release) loading
<6>ivtv: Linux version: 2.6.18.2-34-default SMP mod_unload gcc-4.1
<6>ivtv: In case of problems please include the debug info between
<6>ivtv: the START INIT IVTV and END INIT IVTV lines, along with
<6>ivtv: any module options, when mailing the ivtv-users mailinglist.
<6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
<7>ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=4 \
(0x14/0x17/0x16/0x15/0x0) <7>ALSA sound/pci/hda/hda_codec.c:2121: \
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <7>ALSA \
sound/pci/hda/hda_codec.c:2123: hp=0x1b, dig_out=0x1e, din_in=0x0 \
<7>ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0x18, fmic=0x0, \
line=0x1a, fline=0x0, cd=0x0, aux=0x0 <6>i2c_adapter i2c-0: nForce2 SMBus \
adapter at 0x4c00 <6>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
<4>PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Probably \
buggy MP table. <3>ohci_hcd 0000:00:0b.0: Found HC with no IRQ. Check \
BIOS/PCI 0000:00:0b.0 setup! <3>ohci_hcd 0000:00:0b.0: init 0000:00:0b.0 \
fail, -19 <4>PCI: No IRQ known for interrupt pin B of device 0000:00:0b.1. \
Probably buggy MP table. <3>ehci_hcd 0000:00:0b.1: Found HC with no IRQ. \
Check BIOS/PCI 0000:00:0b.1 setup! <3>ehci_hcd 0000:00:0b.1: init \
0000:00:0b.1 fail, -19 <6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[7] \
MMIO=[fdcff000-fdcff7ff] Max Packet=[1024] IR/IT contexts=[8/8] <6>ivtv0: \
Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) <6>ivtv0: \
Unreasonably low latency timer, setting to 64 (was 32) <6>ivtv0: unable to \
open firmware v4l-cx2341x-enc.fw <6>ivtv0: did you put the firmware in the \
hotplug firmware directory? <6>ivtv0 warning: failed loading encoder \
firmware <6>ivtv0 warning: Error loading firmware -3!
<3>ivtv0: Error -3 initializing firmware.
<3>Trying to free already-free IRQ 7
<3>ivtv0: Error -12 on initialization
<4>ivtv: probe of 0000:02:09.0 failed with error -12
<6>ivtv: ==================== END INIT IVTV ====================
<6>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000ed3868]
<6>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
<6>ivtv0: did you put the firmware in the hotplug firmware directory?
<6>ivtv0 warning: failed loading encoder firmware
<6>ivtv0 warning: Error loading firmware -3!
<3>ivtv0: Error -3 initializing firmware.
<3>Trying to free already-free IRQ 7
<3>ivtv0: Error -12 on initialization
<4>ivtv: probe of 0000:02:09.0 failed with error -12
<6>Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 \
across:2104472k <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) \
initialised: dm-devel@redhat.com <6>loop: loaded (max 8 devices)
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>NTFS driver 2.1.27 [Flags: R/W MODULE].
<6>NTFS volume version 3.1.
<6>AppArmor: AppArmor initialized
<5>audit(1167334432.636:2): AppArmor initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Thu Dec 28 19:33:39 2006
Trying manual resume from /dev/sda5
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading scsi_mod
Loading sd_mod
Loading amd74xx
Loading libata
Loading sata_nv
Loading processor
Loading thermal
FATAL: Error inserting thermal \
(/lib/modules/2.6.18.2-34-default/kernel/drivers/acpi/thermal.ko): No such \
device Loading fan
FATAL: Error inserting fan \
(/lib/modules/2.6.18.2-34-default/kernel/drivers/acpi/fan.ko): No such \
device Loading edd
Loading jbd
Loading mbcache
Loading ext3
Invoking userspace resume from /dev/sda5
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.3
resume: Could not read the image
Invoking in-kernel resume from /dev/sda5
Waiting for device /dev/sda6 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda6
/dev/sda6: Superblock last write time is in the future. FIXED.
/dev/sda6: clean, 239950/2626560 files, 1402147/5242880 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda6
Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Dec 28 \
11:33:44 2006
<notice>boot.udev start
Starting udevd done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
done
<notice>'boot.device-mapper start' exits with status 0
<notice>boot.md start
Starting MD Raid done
<notice>'boot.md start' exits with status 0
<notice>boot.lvm start
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
No volume groups found
Activating LVM volume groups...
No volume groups found
done
<notice>'boot.lvm start' exits with status 0
<notice>boot.localfs start
Checking file systems...
fsck 1.39 (29-May-2006)
/dev/sda7: Superblock last write time is in the future. FIXED.
/dev/sda7: clean, 611/12713984 files, 447684/25400765 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda7 on /home type ext3 (rw,acl,user_xattr)
/dev/sda1 on /windows/C type ntfs \
(ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8) \
done<notice>'boot.localfs start' exits with status 0 <notice>boot.apparmor \
start Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
<notice>'boot.apparmor start' exits with status 0
<notice>boot.cleanup start
<notice>'boot.cleanup start' exits with status 0
<notice>boot.clock start
Setting up the hardware clockdone
<notice>'boot.clock start' exits with status 0
<notice>boot.cycle start
<notice>'boot.cycle start' exits with status 6
<notice>boot.klog start
Creating /var/log/boot.msg
done<notice>killproc: kill(856,29)
<notice>'boot.klog start' exits with status 0
<notice>boot.proc start
<notice>'boot.proc start' exits with status 0
<notice>boot.sysctl start
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
<notice>'boot.sysctl start' exits with status 0
<notice>boot.udev_retry start
Retry device configurationdone
<notice>'boot.udev_retry start' exits with status 0
<notice>boot.videobios start
<notice>'boot.videobios start' exits with status 0
<notice>boot.crypto start
<notice>'boot.crypto start' exits with status 0
<notice>boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice>'boot.ipconfig start' exits with status 0
<notice>boot.localnet start
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>'boot.localnet start' exits with status 0
<notice>boot.preload start
done
<notice>'boot.preload start' exits with status 0
<notice>boot.swap start
Activating remaining swap-devices in /etc/fstab...
done<notice>'boot.swap start' exits with status 0
<notice>SuSEfirewall2_init start
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: \
ip6tables does not support state matching. Extended IPv6 support disabled. \
done <notice>'SuSEfirewall2_init start' exits with status 0
<notice>boot.ldconfig start
<notice>'boot.ldconfig start' exits with status 0
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(856,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Thu Dec 28 19:34:07 2006
<notice>Master Resource Control: previous runlevel: N, switching to \
runlevel: 5 Loading AppArmor profiles - AppArmor already loaded with \
profiles.skipped
acpid: no ACPI support in kernelskipped
startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ \
PREVLEVEL=N LINES=44 acpi=off SHLVL=2 HOME=/ SPLASH=yes splash=silent \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] done
Initializing random number generatordone
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon \
--system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh \
TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 \
REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 \
RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] \
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ \
PREVLEVEL=N LINES=44 acpi=off SHLVL=2 HOME=/ SPLASH=yes splash=silent \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/klogd ] \
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting \
syslog servicesdone Starting D-Bus daemondone
Starting resource managerdone
Starting irqbalance unused
<notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] \
Starting PolicyKit daemondone <notice>startproc: execve (/usr/sbin/hald) [ \
/usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 \
SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX \
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 \
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Starting \
HAL daemondone Loading CPUFreq modules (CPUFreq not supported)
Loading keymap i386/qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
done<notice>pidofproc: dhcpcd 3066
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: nVidia Corporation MCP51 Ethernet Controller (rev \
a3) eth0 configuration: eth-id-00:18:f3:89:05:4c
eth0 (DHCP) . IP/Netmask: 192.168.1.1 / 255.255.255.0
doneSetting up service network . . . . . . . . . . . . . . . \
.done Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting \
RPC portmap daemondone Importing Net File System (NFS)unused
Checking/updating CPU microcode unused
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting \
Name Service Cache Daemondone <notice>killproc: kill(2445,20)
<notice>killproc: kill(2428,1)
<notice>killproc: kill(2445,18)
<notice>killproc: kill(2445,12)
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/sbin/auditd ] Starting \
nfsboot (sm-notify) done <notice>startproc: execve (/usr/sbin/sshd) [ \
/usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console \
ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX \
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 \
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting \
SSH daemondone Starting auditd done
Starting ZENworks Management Daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d \
-v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh \
RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: \
done Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting \
CRON daemondone Starting service kdm<notice>startproc: execve \
(/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console \
ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 \
INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ \
LANG=en_US.UTF-8 PREVLEVEL=N LINES=44 acpi=off \
QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ \
XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes \
splash=silent ROOTFS_BLKDEV=/dev/sda6 _=/sbin/startproc \
DAEMON=/opt/kde3/bin/kdm ] done
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ \
CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux \
ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 \
COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ \
SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg \
PREVLEVEL=N acpi=off LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes \
ROOTFS_BLKDEV=/dev/sda6 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Starting \
service kdmdone Starting cupsddone
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: \
ip6tables does not support state matching. Extended IPv6 support disabled. \
done Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: acpid irq_balancer smbfs nfs microcode
<notice>killproc: kill(2347,3)
___________________________________________________
This message is from the kde-linux mailing list.
Account management: https://mail.kde.org/mailman/listinfo/kde-linux.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic