[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-doc-english
Subject: =?utf-8?q?=5Beducation/kstars/stable-3=2E5=2E6=5D_doc=3A_USB_entity_causing_build_problems_on_Ubuntu
From: Jasem Mutlaq <null () kde ! org>
Date: 2021-11-16 22:50:57
Message-ID: 20211116225057.8DB2912421DD () leptone ! kde ! org
[Download RAW message or body]
Git commit 05ce1040ebb577429b2a95a7bd45baea62d61d78 by Jasem Mutlaq.
Committed on 16/11/2021 at 22:50.
Pushed by mutlaqja into branch 'stable-3.5.6'.
USB entity causing build problems on Ubuntu 18.04 so reverting to regular text until \
22.04 is released and 20.04 is the new baseline
M +5 -5 doc/indi.docbook
https://invent.kde.org/education/kstars/commit/05ce1040ebb577429b2a95a7bd45baea62d61d78
diff --git a/doc/indi.docbook b/doc/indi.docbook
index f65631399..f690c2a71 100644
--- a/doc/indi.docbook
+++ b/doc/indi.docbook
@@ -84,14 +84,14 @@ run under one INDI server, and hence one port. Select multiple \
drivers then pres
<para>Most telescopes are equipped with <hardware>RS232</hardware> interface
for remote control. Connect the RS232 jack in your telescope to your
-computer's <hardware>Serial/&USB;</hardware> port. Traditionally, the RS232
+computer's <hardware>Serial/USB</hardware> port. Traditionally, the RS232
connects to the serial port of your computer, but since many new laptops
-abandoned the serial port in favor of <hardware>&USB;/FireWire</hardware>
-ports, you might need to obtain a Serial to &USB; adaptor to use with new
+abandoned the serial port in favor of <hardware>USB/FireWire</hardware>
+ports, you might need to obtain a Serial to USB adaptor to use with new
laptops.
</para>
-<para>After connecting your telescope to the Serial/&USB; port, turn your
+<para>After connecting your telescope to the Serial/USB port, turn your
telescope on. It is <emphasis>highly</emphasis> recommended that you
download and install the latest firmware for your telescope
controller.
@@ -706,7 +706,7 @@ the sky map. This procedure is described in detail in the
<question>
<para>
When I try to <guibutton>Connect</guibutton>, &kstars; reports that the
-telescope is not connected to the serial/&USB; port. What can I do?
+telescope is not connected to the serial/USB port. What can I do?
</para>
</question>
<answer>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic