[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-commits
Subject: [kde-dev-scripts] cmake-utils/scripts: Clean mess with trailing spaces, indentation, lower / upperca
From: Urs Wolfer <uwolfer () kde ! org>
Date: 2013-04-16 20:58:48
Message-ID: 20130416205848.37382A6181 () git ! kde ! org
[Download RAW message or body]
Git commit 042ef29619739f85c461b8c0ee3a8510fd0604ef by Urs Wolfer.
Committed on 16/02/2008 at 17:27.
Pushed by whiting into branch 'master'.
Clean mess with trailing spaces, indentation, lower / uppercase, double-spaces... \
Also fix DCOP stuff. This should had happened before trunk had been converted to \
CMake...
svn path=/trunk/KDE/kdesdk/cmake/scripts/; revision=775768
M +103 -105 cmake-utils/scripts/am2cmake
http://commits.kde.org/kde-dev-scripts/042ef29619739f85c461b8c0ee3a8510fd0604ef
diff --git a/cmake-utils/scripts/am2cmake b/cmake-utils/scripts/am2cmake
index 313caac..26beb85 100755
--- a/cmake-utils/scripts/am2cmake
+++ b/cmake-utils/scripts/am2cmake
@@ -556,30 +556,30 @@ class CMakeFile
file=File.new(@listsFile, "w+");
if @amFile=="Makefile.am" && $buildType == BuildKDE3 # the toplevel \
Makefile.am
- file.printf("FIND_PACKAGE(KDE3 REQUIRED)\n\n")
- file.printf("SET(CMAKE_VERBOSE_MAKEFILE ON)\n\n")
- file.printf("ADD_DEFINITIONS(${QT_DEFINITIONS} ${KDE3_DEFINITIONS})\n\n")
- file.printf("LINK_DIRECTORIES(${KDE3_LIB_DIR})\n\n")
+ file.printf("find_package(KDE3 REQUIRED)\n\n")
+ file.printf("set(CMAKE_VERBOSE_MAKEFILE ON)\n\n")
+ file.printf("add_definitions(${QT_DEFINITIONS} ${KDE3_DEFINITIONS})\n\n")
+ file.printf("link_directories(${KDE3_LIB_DIR})\n\n")
end
if !@configHeaders.empty?
- @configHeaders.each{ |header| \
file.printf("CONFIGURE_FILE(${CMAKE_CURRENT_SOURCE_DIR}/#{header}.cmake \
${CMAKE_CURRENT_BINARY_DIR}/#{header} )\n\n") } + @configHeaders.each{ \
|header| file.printf("configure_file(${CMAKE_CURRENT_SOURCE_DIR}/#{header}.cmake \
${CMAKE_CURRENT_BINARY_DIR}/#{header})\n\n") } end
if not @subDirs.empty?
- @subDirs.each{ |dir| file.printf("ADD_SUBDIRECTORY( %s ) \n", dir)}
+ @subDirs.each{ |dir| file.printf("add_subdirectory(%s)\n", dir)}
file.printf("\n")
end
if not @skippedSubDirs.empty?
- @skippedSubDirs.each{ |dir| file.printf("MESSAGE(STATUS \
\"${CMAKE_CURRENT_SOURCE_DIR}: skipped subdir %s\")\n", dir)} + \
@skippedSubDirs.each{ |dir| file.printf("message(STATUS \
\"${CMAKE_CURRENT_SOURCE_DIR}: skipped subdir %s\")\n", dir)} end
if not @includeDirs.empty?
- file.printf("INCLUDE_DIRECTORIES( ")
+ file.printf("include_directories(")
@includeDirs.each{ |dir| file.printf("%s ", dir) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
end
@targets.each do |buildTarget|
file.printf("\n########### next target ###############\n\n")
@@ -615,113 +615,113 @@ class CMakeFile
needToCreateDummyFile=true if not \
FileTest.exists?(@path+"/dummy.cpp") end
end
- file.printf(" )\n\n")
+ file.printf(")\n\n")
if $buildType == BuildKDE3
- file.printf("KDE3_AUTOMOC(${%s})\n\n", srcsName)
+ file.printf("kde3_automoc(${%s})\n\n", srcsName)
end
if needToCreateDummyFile
# printf("creating dummy file in #{@path} ________\n")
- file.printf("FILE(WRITE dummy.cpp \"//autogenerated file by \
cmake\\n\")\n") + file.printf("file(WRITE dummy.cpp \"//autogenerated \
file by cmake\\n\")\n") end
end
if not buildTarget.uis.empty?
- file.printf("SET( %s\n", uisName)
- buildTarget.uis.each{ |currentFile| file.printf(" %s\n", currentFile)}
- file.printf(" )\n\n")
- file.printf("KDE3_ADD_UI_FILES(%s ${%s} )\n\n", srcsName, uisName)
+ file.printf("set(%s\n", uisName)
+ buildTarget.uis.each{ |currentFile| file.printf(" %s\n", \
currentFile)} + file.printf(")\n\n")
+ file.printf("kde3_add_ui_files(%s ${%s})\n\n", srcsName, uisName)
end
if not buildTarget.skels.empty?
- file.printf("SET( %s\n", skelsName)
- buildTarget.skels.each{ |currentFile| file.printf(" %s\n", \
currentFile)}
- file.printf(" )\n\n")
+ file.printf("set(%s\n", skelsName)
+ buildTarget.skels.each{ |currentFile| file.printf(" %s\n", \
currentFile)} + file.printf(")\n\n")
- file.printf("KDE3_ADD_DCOP_SKELS(%s ${%s})\n\n", srcsName, skelsName)
+ file.printf("kde3_add_dcop_skels(%s ${%s})\n\n", srcsName, skelsName)
end
if not buildTarget.stubs.empty?
- file.printf("SET( %s\n", stubsName)
- buildTarget.stubs.each{ |currentFile| file.printf(" %s\n", \
currentFile)}
- file.printf(" )\n\n")
+ file.printf("set(%s\n", stubsName)
+ buildTarget.stubs.each{ |currentFile| file.printf(" %s\n", \
currentFile)} + file.printf(")\n\n")
- file.printf("KDE3_ADD_DCOP_STUBS(%s ${%s})\n\n", srcsName, stubsName)
+ file.printf("kde3_add_dcop_stubs(%s ${%s})\n\n", srcsName, stubsName)
end
if not buildTarget.kcfgs.empty?
- file.printf("SET( %s\n", kcfgsName)
- buildTarget.kcfgs.each{ |currentFile| file.printf(" %s\n", \
currentFile)}
- file.printf(" )\n\n")
+ file.printf("set(%s\n", kcfgsName)
+ buildTarget.kcfgs.each{ |currentFile| file.printf(" %s\n", \
currentFile)} + file.printf(")\n\n")
- file.printf("KDE3_ADD_KCFG_FILES(%s ${%s})\n\n", srcsName, kcfgsName)
+ file.printf("kde3_add_kcfg_files(%s ${%s})\n\n", srcsName, kcfgsName)
end
if buildTarget.type==SharedLib
- file.printf("ADD_LIBRARY(%s SHARED ${%s})\n\n", buildTarget.name, \
srcsName)
- file.printf("TARGET_LINK_LIBRARIES(%s ", buildTarget.name)
+ file.printf("add_library(%s SHARED ${%s})\n\n", buildTarget.name, \
srcsName) + file.printf("target_link_libraries(%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
- file.printf("SET_TARGET_PROPERTIES(%s PROPERTIES VERSION 4.2.0 SOVERSION \
4 )\n", buildTarget.name)
- file.printf("INSTALL(TARGETS %s DESTINATION lib )\n\n", \
buildTarget.name) + file.printf("set_target_properties(%s PROPERTIES \
VERSION 4.2.0 SOVERSION 4)\n", buildTarget.name) + \
file.printf("install(TARGETS %s DESTINATION lib)\n\n", buildTarget.name) elsif \
buildTarget.type==StaticLib
- file.printf("ADD_LIBRARY(%s STATIC ${%s})\n\n", buildTarget.name, \
srcsName) + file.printf("add_library(%s STATIC ${%s})\n\n", \
buildTarget.name, srcsName) elsif buildTarget.type==Part
if buildTarget.stdPrefix
- file.printf("KDE3_ADD_KPART(%s WITH_PREFIX ${%s})\n\n", \
buildTarget.name, srcsName) + file.printf("kde3_add_kpart(%s \
WITH_PREFIX ${%s})\n\n", buildTarget.name, srcsName) else
- file.printf("KDE3_ADD_KPART(%s ${%s})\n\n", buildTarget.name, \
srcsName) + file.printf("kde3_add_kpart(%s ${%s})\n\n", \
buildTarget.name, srcsName) end
- file.printf("TARGET_LINK_LIBRARIES(%s ", buildTarget.name)
+ file.printf("target_link_libraries(%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
- file.printf("INSTALL(TARGETS %s DESTINATION lib/kde3)\n\n", \
buildTarget.name) + file.printf("install(TARGETS %s DESTINATION \
lib/kde3)\n\n", buildTarget.name) elsif buildTarget.type==KDEInit
- file.printf("KDE3_ADD_KDEINIT_EXECUTABLE( %s ${%s})\n\n", \
buildTarget.name, srcsName) + file.printf("kde3_add_kdeinit_executable(%s \
${%s})\n\n", buildTarget.name, srcsName)
- file.printf("TARGET_LINK_LIBRARIES(kdeinit_%s ", buildTarget.name)
+ file.printf("target_link_libraries(kdeinit_%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
- file.printf("INSTALL(TARGETS kdeinit_%s DESTINATION lib )\n\n", \
buildTarget.name) + file.printf("install(TARGETS kdeinit_%s DESTINATION \
lib)\n\n", buildTarget.name)
- file.printf("TARGET_LINK_LIBRARIES( %s kdeinit_%s )\n", \
buildTarget.name, buildTarget.name) + \
file.printf("target_link_libraries(%s kdeinit_%s)\n", buildTarget.name, \
buildTarget.name)
- file.printf("INSTALL(TARGETS %s DESTINATION bin)\n", buildTarget.name)
+ file.printf("install(TARGETS %s DESTINATION bin)\n", buildTarget.name)
else #executable
if $buildType == BuildNoKDE
- file.printf("ADD_EXECUTABLE(%s ${%s})\n\n", buildTarget.name, \
srcsName) + file.printf("add_executable(%s ${%s})\n\n", \
buildTarget.name, srcsName)
- file.printf("TARGET_LINK_LIBRARIES(%s ", buildTarget.name)
+ file.printf("target_link_libraries(%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
if buildTarget.install
- file.printf("INSTALL(TARGETS %s DESTINATION bin)\n\n", \
buildTarget.name) + file.printf("install(TARGETS %s DESTINATION \
bin)\n\n", buildTarget.name) end
else
if buildTarget.test
- file.printf("IF(KDE3_BUILD_TESTS)\n\n")
+ file.printf("if(KDE3_BUILD_TESTS)\n\n")
end
- file.printf("KDE3_ADD_EXECUTABLE(%s ${%s})\n\n", buildTarget.name, \
srcsName) + file.printf("kde3_add_executable(%s ${%s})\n\n", \
buildTarget.name, srcsName)
- file.printf("TARGET_LINK_LIBRARIES(%s ", buildTarget.name)
+ file.printf("target_link_libraries(%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
if buildTarget.install
- file.printf("INSTALL( TARGETS %s DESTINATION bin)\n\n", \
buildTarget.name) + file.printf("install(TARGETS %s DESTINATION \
bin)\n\n", buildTarget.name) end
if buildTarget.test
- file.printf("ENDIF(KDE3_BUILD_TESTS)\n")
+ file.printf("endif(KDE3_BUILD_TESTS)\n")
end
end
@@ -733,12 +733,12 @@ class CMakeFile
file.printf("\n########### install files ###############\n\n")
@installs.each do |key, install|
- file.printf("INSTALL(FILES %s DESTINATION %s )\n", install.files, \
install.location) + file.printf("install(FILES %s DESTINATION %s)\n", \
install.files, install.location) end
file.printf("\n")
if @installIcons
- file.printf("KDE3_INSTALL_ICONS( %s )\n\n",@iconDir )
+ file.printf("kde3_install_icons(%s)\n\n", @iconDir)
end
file.printf("\n\n#original Makefile.am contents follow:\n\n")
@@ -761,18 +761,18 @@ class CMakeFile
end
if not @includeDirs.empty?
- file.printf("include_directories( ")
+ file.printf("include_directories(")
@includeDirs.each{ |dir| file.printf("%s ", dir) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
end
if !@configHeaders.empty?
- @configHeaders.each{ |header| \
file.printf("configure_file(${CMAKE_CURRENT_SOURCE_DIR}/#{header}.cmake \
${CMAKE_CURRENT_BINARY_DIR}/#{header} )\n\n") } + @configHeaders.each{ \
|header| file.printf("configure_file(${CMAKE_CURRENT_SOURCE_DIR}/#{header}.cmake \
${CMAKE_CURRENT_BINARY_DIR}/#{header})\n\n") } end
if not @subDirs.empty?
- @subDirs.each{ |dir| file.printf("add_subdirectory( %s )\n", dir)}
+ @subDirs.each{ |dir| file.printf("add_subdirectory(%s)\n", dir)}
file.printf("\n")
end
if not @skippedSubDirs.empty?
@@ -808,37 +808,37 @@ class CMakeFile
$convFile.printf("# %s: %s\n\n", @amFile, buildTarget.name)
if buildTarget.sources.empty?
- $convFile.printf("set(%s \n", srcsName)
- buildTarget.sources.each { |currentFile| $convFile.printf(" \
${CMAKE_SOURCE_DIR}/%s%s\n", @path, currentFile) } + \
$convFile.printf("set(%s\n", srcsName) + buildTarget.sources.each { \
|currentFile| $convFile.printf(" ${CMAKE_SOURCE_DIR}/%s%s\n", @path, currentFile) \
} $convFile.printf(")\n\n", srcsName)
end
if not buildTarget.uis.empty?
- $convFile.printf("set( %s\n", uisName)
+ $convFile.printf("set(%s\n", uisName)
buildTarget.uis.each{ |currentFile| $convFile.printf("%s\n", \
currentFile)} $convFile.printf(")\n\n")
end
if not buildTarget.ui3s.empty?
- $convFile.printf("set( %s\n", ui3sName)
+ $convFile.printf("set(%s\n", ui3sName)
buildTarget.ui3s.each{ |currentFile| $convFile.printf("%s\n", \
currentFile)} $convFile.printf(")\n\n")
end
if not buildTarget.qrcs.empty?
- $convFile.printf("set( %s\n", qrcsName)
+ $convFile.printf("set(%s\n", qrcsName)
buildTarget.qrcs.each{ |currentFile| $convFile.printf("%s\n", \
currentFile)} $convFile.printf(")\n\n")
end
if not buildTarget.skels.empty?
- $convFile.printf("set( %s\n", skelsName)
+ $convFile.printf("set(%s\n", skelsName)
buildTarget.skels.each{ |currentFile| $convFile.printf("%s\n", \
currentFile)} $convFile.printf(")\n\n")
end
if not buildTarget.stubs.empty?
- $convFile.printf("set( %s\n", stubsName)
+ $convFile.printf("set(%s\n", stubsName)
buildTarget.stubs.each{ |currentFile| $convFile.printf("%s\n", \
currentFile)} $convFile.printf(")\n\n")
end
if not buildTarget.kcfgs.empty?
- $convFile.printf("set( %s\n", kcfgsName)
+ $convFile.printf("set(%s\n", kcfgsName)
buildTarget.kcfgs.each{ |currentFile| $convFile.printf("%s\n", \
currentFile)} $convFile.printf(")\n\n")
end
@@ -850,12 +850,12 @@ class CMakeFile
end
if not buildTarget.sources.empty?
- file.printf("set(%s ", srcsName)
+ file.printf("set(%s", srcsName)
needToCreateDummyFile=false
buildTarget.sources.each do |currentFile|
# if there are more than 3 files, print each of them on its own line
file.printf("\n ") if buildTarget.sources.size>3
- file.printf("%s ", currentFile)
+ file.printf(" %s", currentFile)
if currentFile=="dummy.cpp"
needToCreateDummyFile=true if not \
FileTest.exists?(@path+"/dummy.cpp") @@ -870,75 +870,75 @@ class CMakeFile
end
if not buildTarget.uis.empty?
- file.printf("kde4_add_ui_files(%s ", srcsName )
+ file.printf("kde4_add_ui_files(%s", srcsName)
buildTarget.uis.each do |currentFile|
# if there are more than 3 files, print each of them on its own line
file.printf("\n ") if buildTarget.uis.size>3
- file.printf("%s ", currentFile)
+ file.printf(" %s", currentFile)
end
file.printf(")\n\n")
end
if not buildTarget.ui3s.empty?
- file.printf("kde4_add_ui3_files(%s ", srcsName)
+ file.printf("kde4_add_ui3_files(%s", srcsName)
buildTarget.ui3s.each do |currentFile|
# if there are more than 3 files, print each of them on its own line
file.printf("\n ") if buildTarget.ui3s.size>3
- file.printf("%s ", currentFile)
+ file.printf(" %s", currentFile)
end
file.printf(")\n\n")
end
if not buildTarget.qrcs.empty?
- file.printf("qt4_add_resources(%s ", srcsName)
+ file.printf("qt4_add_resources(%s", srcsName)
buildTarget.qrcs.each do |currentFile|
# if there are more than 3 files, print each of them on its own line
file.printf("\n ") if buildTarget.qrcs.size>3
- file.printf("%s ", currentFile)
+ file.printf(" %s", currentFile)
end
file.printf(")\n\n")
end
if not buildTarget.skels.empty?
- file.printf("#kde4_add_dcop_skels(%s );\n", srcsName)
- file.printf("MESSAGE(STATUS \"DCOP stuff was remove into kde4, convert \
it to dbus please.kde4_add_dcop_skels macro doesn't exist now. We keep it just to \
remember to port to dbus\")\n") + file.printf("message(STATUS \"DCOP has \
been removed in KDE 4; port code to D-Bus. kde4_add_dcop_skels macro does not exist \
anymore. We keep it just to remember to port to D-Bus.\")\n") + \
file.printf("#kde4_add_dcop_skels(%s\n", srcsName) buildTarget.skels.each do \
|currentFile|
# if there are more than 3 files, print each of them on its own line
- file.printf("\n ") if buildTarget.skels.size>3
+ file.printf("\n# ") if buildTarget.skels.size>3
file.printf("%s ", currentFile)
end
file.printf(")\n\n")
end
if not buildTarget.stubs.empty?
- file.printf("#kde4_add_dcop_stubs(%s )\n", srcsName)
- file.printf("MESSAGE(STATUS \"DCOP stuff was remove into kde4, convert \
it to dbus please. kde4_add_dcop_stubs doen't exist. We keep it to remember to port \
to dbus\")\n") + file.printf("message(STATUS \"DCOP has been removed in \
KDE 4; port code to D-Bus. kde4_add_dcop_skels macro does not exist anymore. We keep \
it just to remember to port to D-Bus.\")\n") + \
file.printf("#kde4_add_dcop_stubs(%s\n", srcsName) buildTarget.stubs.each do \
|currentFile|
# if there are more than 3 files, print each of them on its own line
- file.printf("\n ") if buildTarget.stubs.size>3
- file.printf("%s ", currentFile)
+ file.printf("\n# ") if buildTarget.stubs.size>3
+ file.printf(" %s", currentFile)
end
file.printf(")\n\n")
end
if not buildTarget.kcfgs.empty?
- file.printf("kde4_add_kcfg_files(%s )", srcsName)
+ file.printf("kde4_add_kcfg_files(%s)", srcsName)
buildTarget.kcfgs.each do |currentFile|
# if there are more than 3 files, print each of them on its own line
file.printf("\n ") if buildTarget.kcfgs.size>3
- file.printf("%s ", currentFile)
+ file.printf(" %s", currentFile)
end
file.printf(")\n\n")
end
if buildTarget.type==SharedLib
file.printf("kde4_add_library(%s SHARED ${%s})\n\n", buildTarget.name, \
srcsName)
- file.printf("target_link_libraries(%s ", buildTarget.name)
+ file.printf("target_link_libraries(%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
- file.printf("set_target_properties(%s PROPERTIES VERSION %d.%d.%d \
SOVERSION %d )\n", buildTarget.name, buildTarget.versionNumberMajor, \
buildTarget.versionNumberMinor, buildTarget.versionNumberPatch, \
buildTarget.versionNumberMajor)
- file.printf("install(TARGETS %s DESTINATION ${LIB_INSTALL_DIR} )\n\n", \
buildTarget.name) + file.printf("set_target_properties(%s PROPERTIES \
VERSION %d.%d.%d SOVERSION %d)\n", buildTarget.name, buildTarget.versionNumberMajor, \
buildTarget.versionNumberMinor, buildTarget.versionNumberPatch, \
buildTarget.versionNumberMajor) + file.printf("install(TARGETS %s \
DESTINATION ${LIB_INSTALL_DIR})\n\n", buildTarget.name)
elsif buildTarget.type==StaticLib
file.printf("kde4_add_library(%s STATIC ${%s})\n\n", buildTarget.name, \
srcsName) @@ -949,21 +949,21 @@ class CMakeFile
else
file.printf("kde4_add_plugin(%s ${%s})\n\n", buildTarget.name, \
srcsName) end
- file.printf("target_link_libraries(%s ", buildTarget.name)
+ file.printf("target_link_libraries(%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
- file.printf("install(TARGETS %s DESTINATION ${PLUGIN_INSTALL_DIR} \
)\n\n", buildTarget.name) + file.printf("install(TARGETS %s DESTINATION \
${PLUGIN_INSTALL_DIR})\n\n", buildTarget.name) elsif buildTarget.type==KDEInit
- file.printf("kde4_add_kdeinit_executable( %s ${%s})\n\n", \
buildTarget.name, srcsName) + file.printf("kde4_add_kdeinit_executable(%s \
${%s})\n\n", buildTarget.name, srcsName)
- file.printf("target_link_libraries(kdeinit_%s ", buildTarget.name)
+ file.printf("target_link_libraries(kdeinit_%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
- file.printf("install(TARGETS kdeinit_%s DESTINATION ${LIB_INSTALL_DIR} \
)\n\n", buildTarget.name) + file.printf("install(TARGETS kdeinit_%s \
DESTINATION ${LIB_INSTALL_DIR})\n\n", buildTarget.name)
- file.printf("target_link_libraries( %s kdeinit_%s )\n", \
buildTarget.name, buildTarget.name) + \
file.printf("target_link_libraries(%s kdeinit_%s)\n", buildTarget.name, \
buildTarget.name)
file.printf("install(TARGETS %s DESTINATION ${BIN_INSTALL_DIR})\n", \
buildTarget.name)
@@ -974,9 +974,9 @@ class CMakeFile
file.printf("kde4_add_executable(%s ${%s})\n\n", buildTarget.name, \
srcsName)
- file.printf("target_link_libraries(%s ", buildTarget.name)
+ file.printf("target_link_libraries(%s", buildTarget.name)
buildTarget.libs.each { |currentLib| file.printf(" %s", currentLib) }
- file.printf(" )\n\n")
+ file.printf(")\n\n")
if buildTarget.install
file.printf("install(TARGETS %s DESTINATION ${BIN_INSTALL_DIR})\n\n", \
buildTarget.name) @@ -993,16 +993,16 @@ class CMakeFile
file.printf("\n########### install files ###############\n\n")
@installs.each do |key, install|
- file.printf("install( FILES %s DESTINATION %s )\n",install.files, \
install.location) + file.printf("install(FILES %s DESTINATION %s)\n", \
install.files, install.location) end
file.printf("\n")
if @installIcons
- file.printf("kde4_install_icons( ${ICON_INSTALL_DIR} )\n\n" )
+ file.printf("kde4_install_icons(${ICON_INSTALL_DIR})\n\n")
end
if @installDoc
- file.printf("kde4_create_handbook(index.docbook INSTALL_DESTINATION \
${HTML_INSTALL_DIR}/en)\n\n" ) + \
file.printf("kde4_create_handbook(index.docbook INSTALL_DESTINATION \
${HTML_INSTALL_DIR}/en)\n\n") end
#if @createDoxygenDocs
# file.printf("kde4_create_doxygen_docs( ")
@@ -1087,6 +1087,4 @@ $configHeaders.each{|inFile| infoFile.printf("%s\n", inFile)}
infoFile.printf("\n.in.in-Files\n")
$configInIns.each{|inFile| infoFile.printf("%s\n", inFile)}
-
Dir["**/Makefile.am"].each{ |currentFile| convertAmFile(currentFile)}
-
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic