[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-commits
Subject: playground/base
From: Burkhard Lück <lueck () hube-lueck ! de>
Date: 2010-03-07 17:21:54
Message-ID: 1267982514.678284.30756.nullmailer () svn ! kde ! org
[Download RAW message or body]
SVN commit 1100502 by lueck:
integrate it into the i18n tool chain
any reasop why the kcm doc is a docbook, an article is more suitable
CCMAIL:joerg.ehrichs@gmx.de
M +1 -0 doc/CMakeLists.txt
D doc/kcm_tablet (directory)
A doc/kcontrol (directory)
A doc/kcontrol/CMakeLists.txt
AM doc/kcontrol/kcm_tablet (directory) doc/kcm_tablet#1100458
M +1 -6 doc/kcontrol/kcm_tablet/CMakeLists.txt
M +16 -16 doc/kcontrol/kcm_tablet/index.docbook
M +1 -1 kcm_tablet/src/kcmodule/kcm_wacomtablet.desktop
--- trunk/playground/base/doc/CMakeLists.txt #1100501:1100502
@@ -1 +1,2 @@
macro_optional_add_subdirectory(kdeprint)
+macro_optional_add_subdirectory(kcontrol)
** trunk/playground/base/doc/kcontrol/kcm_tablet #property svn:mergeinfo
+
--- trunk/playground/base/doc/kcontrol/kcm_tablet/CMakeLists.txt #1100458:1100502
@@ -1,6 +1 @@
-find_package(KDE4 REQUIRED)
-
-include_directories( ${KDE4_INCLUDES} )
-
-
-kde4_create_handbook(index.docbook INSTALL_DESTINATION ${HTML_INSTALL_DIR}/en SUBDIR \
kcontrol/tablet) +kde4_create_handbook(index.docbook INSTALL_DESTINATION \
${HTML_INSTALL_DIR}/en SUBDIR kcontrol/kcm_tablet)
--- trunk/playground/base/doc/kcontrol/kcm_tablet/index.docbook #1100458:1100502
@@ -48,7 +48,7 @@
<title>Wacom Tablet Settings</title>
<para>
The tablet &systemsettings; module handles all setting for your graphic tablet. All \
tablets supported by
- the <ulink url="http://linuxwacom.sourceforge.net">Linux Wacom driver</ulink> \
project are handled by this settings interface. + the <ulink \
url="http://linuxwacom.sourceforge.net">&Linux; Wacom driver</ulink> project are \
handled by this settings interface. Make sure your tablet is detected either via \
xorg.conf or HAL and works in general. Refer to the <link linkend="detection">tablet \
detection</link> section for more information. </para>
<important>
@@ -60,7 +60,7 @@
<para>
The module is split into various tab pages that handle all aspects of your tablet \
and the pen: <link linkend="tablet-profiles">Profiles</link>,
- <link linkend="tablet-general">General Informations</link>,
+ <link linkend="tablet-general">General Information</link>,
<link linkend="pad-buttons">Pad Buttons</link>,
<link linkend="pad-mapping">Pad Mapping</link>,
<link linkend="screen-setup">Screen Setup</link>,
@@ -71,18 +71,18 @@
<title>Profile Management</title>
<para>
- This is the small dropdown box with the two buttons next to it. You can create \
new profiles and delete already existing ones. + This is the small drop down box \
with the two buttons next to it. You can create new profiles and delete already \
existing ones.
Each profile is saved and specified for the currently connected tablet. If you \
create a new profile, it automatically creates one with the default settings as \
returned by the wacom-tools. </para>
<para>
Here you can specify different profiles for your settings.
- For example if you like to have a different behaviour of the pen when you use \
it + For example if you like to have a different behavior of the pen when you use \
it
as a mouse replacement for your day to day work or using it as pen to draw \
something. </para>
<para>
- Each profile can be changed on the fly and directly changes the behaviour of \
your tablet input. + Each profile can be changed on the fly and directly changes \
the behavior of your tablet input. </para>
<note>
<para>
@@ -93,10 +93,10 @@
</sect1>
<sect1 id="tablet-general">
- <title>General Tablet Settings and Informations</title>
+ <title>General Tablet Settings and Information</title>
<para>
- Shows some general Informations about the detected tablet.
+ Shows some general Information about the detected tablet.
Beside the name and company of your tablet an image is shown and all detected \
input devices are listed. </para>
@@ -150,7 +150,7 @@
<title>Pad Mapping Settings</title>
<para>
- This pages change the behaviour of the tablet working area. It can be \
rotated and reduced in size. + This pages change the behavior of the \
tablet working area. It can be rotated and reduced in size. </para>
<para>
The <guilabel>Working area</guilabel> spans the whole tablet by default. \
The <guilabel>Top X/Y</guilabel> and <guilabel>Bottom X/Y</guilabel> coordinates can \
be changed to change the aspect ratio of the tablet and thus match @@ -194,7 +194,7 \
@@ </para>
<note><para>
- The button actions screen toggle and display toggle change the multi \
monitor behaviour on the fly. See the <link linkend="stylus">stylus</link> section \
for more information. + The button actions screen toggle and display \
toggle change the multi monitor behavior on the fly. See the <link \
linkend="stylus">stylus</link> section for more information. </para></note>
</sect1>
@@ -203,7 +203,7 @@
<para>
The pen that is used together with the tablet has two different sides, the main \
side is called stylus.
- With this dialogue you can change any aspect of the stylus side and the buttons \
on the pen to adjust them to your needs. + With this dialog you can change any \
aspect of the stylus side and the buttons on the pen to adjust them to your needs. \
</para>
<sect2 id="cursor-settings"><title>Cursor Settings</title>
@@ -230,11 +230,11 @@
<listitem>
<para><guilabel>Pressure</guilabel> :
- Change the presscurve. The curve is shown in a new dialogue and you can change \
the Bézier curve with the + Change the press curve. The curve is shown in a new \
dialog and you can change the Bézier curve with the red dots. The curve defines how \
the pressure of the pen is translated. </para>
<note><para>
- Use your pen inside the press curve dialogue to see the changes in the presscurve \
directly. + Use your pen inside the press curve dialog to see the changes in the \
press curve directly. A blue area below the curve shows the applied pressure of the \
pen. </para></note>
</listitem>
@@ -341,7 +341,7 @@
<title>Tablet daemon</title>
<para>
The tablet daemon runs in the background and does the ground work. Detecting \
the tablet and set it up with the selected profiles.
- If the daemon is not running the &systemsettings; module and the plasma \
applet can not work properly and the tablet can not be used with the profiles. + \
If the daemon is not running the &systemsettings; module and the plasma applet cannot \
work properly and the tablet cannot be used with the profiles. </para>
<sect1 id="detection">
@@ -352,13 +352,13 @@
If Solid fails the next steps are <command>xsetwacom list dev</command>, \
<command>lsusb</command> and <command>xinput --list</command>. </para>
<para>
- Should none of the commands above return the name of the tablet, it is \
not supported and can not be used by this module. + Should none of the \
commands above return the name of the tablet, it is not supported and cannot be used \
by this module. </para>
</sect1>
<sect1 id="troubles">
<title>Detection problems</title>
<para>
- If the tablet is not detected check the <ulink \
url="http://linuxwacom.sourceforge.net">Linux Wacom driver</ulink> page if your \
tablet is supported. + If the tablet is not detected check the <ulink \
url="http://linuxwacom.sourceforge.net">&Linux; Wacom driver</ulink> page if your \
tablet is supported.
Furthermore check via <command>lsusb</command> if you can find your \
tablet. </para>
<para>
@@ -403,4 +403,4 @@
&underGPL;
</chapter>
-</book>
\ No newline at end of file
+</book>
--- trunk/playground/base/kcm_tablet/src/kcmodule/kcm_wacomtablet.desktop \
#1100501:1100502 @@ -3,7 +3,7 @@
Icon=input-tablet
Type=Service
X-KDE-ServiceTypes=KCModule
-X-DocPath=kcontrol/wacomtablet/index.html
+X-DocPath=kcontrol/kcm_tablet/index.html
X-KDE-Library=kcm_wacomtablet
X-KDE-ParentApp=kcontrol
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic