[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-bugs-dist
Subject: [kwin] [Bug 351118] composited mpv fullscreen video induces a GPU reset
From: Mark <markg85 () gmail ! com>
Date: 2015-08-16 18:13:55
Message-ID: bug-351118-17878-eYjzCAJkGq () http ! bugs ! kde ! org/
[Download RAW message or body]
https://bugs.kde.org/show_bug.cgi?id=351118
--- Comment #5 from Mark <markg85@gmail.com> ---
Just had the issue again. The information:
dmesg | tail -100 --- right after the reset (i don't think it tells anything
though.)
└─> $ dmesg | tail -100
[ 1.225055] usb 5-1.3: new full-speed USB device number 3 using xhci_hcd
[ 1.275812] systemd-journald[84]: Received SIGTERM from PID 1 (systemd).
[ 1.378217] usb 5-1.4: new low-speed USB device number 4 using xhci_hcd
[ 1.398167] tsc: Refined TSC clocksource calibration: 3503.445 MHz
[ 1.398172] clocksource tsc: mask: 0xffffffffffffffff max_cycles:
0x32800736690, max_idle_ns: 440795289710 ns
[ 1.450458] systemd[1]: RTC configured in localtime, applying delta of 120
minutes to system time.
[ 1.473919] usb 5-1.4: ep 0x81 - rounding interval to 64 microframes, ep
desc says 80 microframes
[ 1.504941] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.505003] systemd[1]: Inserted module 'ip_tables'
[ 1.805326] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[ 2.184891] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.184899] ACPI: Power Button [PWRB]
[ 2.184975] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.184978] ACPI: Power Button [PWRF]
[ 2.197915] wmi: Mapper loaded
[ 2.229445] random: nonblocking pool is initialized
[ 2.234438] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
[ 2.234447] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 2.234455] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[ 2.234458] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 2.234460] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[ 2.234465] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 2.234473] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x000000000000051F (\LED_) (20150410/utaddress-254)
[ 2.234478] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[ 2.234486] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 2.234488] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.234583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.235218] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.235221] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.235427] EDAC MC: Ver: 3.0.0
[ 2.235918] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.235921] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.268674] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.280528] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 2.280844] ACPI Warning: SystemIO range
0x000000000000F000-0x000000000000F01F conflicts with OpRegion
0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI)
(20150410/utaddress-254)
[ 2.280850] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 2.281276] systemd-journald[223]: Received request to flush runtime journal
from PID 1
[ 2.292340] [drm] Initialized drm 1.1.0 20060810
[ 2.295682] alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet
[90:2b:34:5a:1f:67]
[ 2.305076] iTCO_vendor_support: vendor-support=0
[ 2.309150] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.309182] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by
hardware/BIOS
[ 2.309246] alx 0000:06:00.0 enp6s0: renamed from eth0
[ 2.314199] AVX version of gcm_enc/dec engaged.
[ 2.314201] AES CTR mode by8 optimization enabled
[ 2.342820] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 2.342974] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 2.342997] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.343002] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.364641] snd_hda_codec_via hdaudioC0D2: autoconfig for VT2020:
line_outs=3 (0x24/0x25/0x26/0x0/0x0) type:line
[ 2.364645] snd_hda_codec_via hdaudioC0D2: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 2.364647] snd_hda_codec_via hdaudioC0D2: hp_outs=1
(0x28/0x0/0x0/0x0/0x0)
[ 2.364649] snd_hda_codec_via hdaudioC0D2: mono: mono_out=0x0
[ 2.364650] snd_hda_codec_via hdaudioC0D2: dig-out=0x2d/0x2e
[ 2.364652] snd_hda_codec_via hdaudioC0D2: inputs:
[ 2.364654] snd_hda_codec_via hdaudioC0D2: Front Mic=0x29
[ 2.364656] snd_hda_codec_via hdaudioC0D2: Rear Mic=0x2b
[ 2.364658] snd_hda_codec_via hdaudioC0D2: Line=0x2a
[ 2.373982] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.374150] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.374185] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.374224] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.374259] input: HDA Intel PCH Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.374297] input: HDA Intel PCH Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.374344] input: HDA Intel PCH Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.374397] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.390605] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.397249] Switched to clocksource tsc
[ 2.411198] intel_rapl: Found RAPL domain package
[ 2.411201] intel_rapl: Found RAPL domain core
[ 2.412010] usbcore: registered new interface driver usbhid
[ 2.412012] usbhid: USB HID core driver
[ 2.421488] nvidia: module license 'NVIDIA' taints kernel.
[ 2.421492] Disabling lock debugging due to kernel taint
[ 2.435196] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.435493] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on
minor 0
[ 2.435497] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.30 Tue Jul
21 18:53:45 PDT 2015
[ 2.444635] input: Logitech Logitech Illuminated Keyboard as
/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C318.0001/input/input14
[ 2.497402] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech Logitech Illuminated Keyboard] on
usb-0000:03:00.0-1.3/input0
[ 2.497958] input: Logitech Logitech Illuminated Keyboard as
/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb5/5-1/5-1.3/5-1.3:1.1/0003:046D:C318.0002/input/input15
[ 2.550562] hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID
v1.11 Device [Logitech Logitech Illuminated Keyboard] on
usb-0000:03:00.0-1.3/input1
[ 2.550660] input: Logitech USB Laser Mouse as
/devices/pci0000:00/0000:00:1c.4/0000:03:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:046D:C069.0003/input/input16
[ 2.550733] hid-generic 0003:046D:C069.0003: input,hidraw2: USB HID v1.10
Mouse [Logitech USB Laser Mouse] on usb-0000:03:00.0-1.4/input0
[ 2.553677] mousedev: PS/2 mouse device common for all mice
[ 2.730921] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 2.730965] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 2.731009] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 2.731046] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 3.255145] Guest personality initialized and is inactive
[ 3.255193] VMCI host device registered (name=vmci, major=10, minor=58)
[ 3.255195] Initialized host personality
[ 3.304296] NET: Registered protocol family 40
[ 3.341431] fuse init (API version 7.23)
[ 3.489668] ppdev: user-space parallel port driver
[ 4.637196] NVRM: Your system is not currently configured to drive a VGA
console
[ 4.637200] NVRM: on the primary VGA device. The NVIDIA Linux graphics
driver
[ 4.637202] NVRM: requires the use of a text-mode VGA console. Use of other
console
[ 4.637203] NVRM: drivers including, but not limited to, vesafb, may result
in
[ 4.637204] NVRM: corruption and stability problems, and is not supported.
[ 5.296941] alx 0000:06:00.0 enp6s0: NIC Up: 1 Gbps Full
dmesg | grep NVRM --- right after the reset.
└─> $ dmesg | grep NVRM
826:[ 2.435497] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.30 Tue
Jul 21 18:53:45 PDT 2015
844:[ 4.637196] NVRM: Your system is not currently configured to drive a VGA
console
845:[ 4.637200] NVRM: on the primary VGA device. The NVIDIA Linux graphics
driver
846:[ 4.637202] NVRM: requires the use of a text-mode VGA console. Use of
other console
847:[ 4.637203] NVRM: drivers including, but not limited to, vesafb, may
result in
848:[ 4.637204] NVRM: corruption and stability problems, and is not
supported.
I will attach the support information outputs right after this post.
--
You are receiving this mail because:
You are watching all bug changes.=
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic