[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-bugs-dist
Subject: [Phonon] [Bug 318637] bluetooth headset output/soundcard not shown in phonon settings in KDE - unabl
From: Dan Duris <kdebugs () staznosti ! sk>
Date: 2013-07-05 12:20:28
Message-ID: bug-318637-17878-ICpTWrwpSy () http ! bugs ! kde ! org/
[Download RAW message or body]
https://bugs.kde.org/show_bug.cgi?id=318637
--- Comment #7 from Dan Duris <kdebugs@staznosti.sk> ---
this is with bluetooth showing audio device connected (!)
>>> 1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9959
volume: 0: 84% 1: 84%
0: -4.57 dB 1: -4.57 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 61.06 ms
max request: 15 KiB
max rewind: 64 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 90.00 ms; range is 2.00 .. 371.52 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VB Analog"
alsa.id = "ALC269VB Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xc4820000 irq 52"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.name = "6 Series/C200 Series Chipset Family High
Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Intel CougarPoint HDMI"
alsa.components = "HDA:10ec0269,1179062e,00100100
HDA:80862805,11790001,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, available: no)
properties:
analog-output-headphones: Headphones (priority 9000, available:
yes)
properties:
active port: <analog-output-headphones>
--
You are receiving this mail because:
You are watching all bug changes.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic