[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-bugs-dist
Subject: [Bug 121005] digikam won´t start when the album-path stays on nfs-volume
From: Micron Gust <microngust () hotmail ! com>
Date: 2007-03-31 19:05:00
Message-ID: 20070331190500.16271.qmail () ktown ! kde ! org
[Download RAW message or body]
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
http://bugs.kde.org/show_bug.cgi?id=121005
------- Additional Comments From microngust hotmail com 2007-03-31 21:04 -------
=digiKam and CIFS/SAMBA/NFS Solution=
Here's a workaround that makes digiKam store pictures on a network folder and it's database on \
a local drive.
==Background==
When you specify that digiKam should store pictures on a network folder (CIFS/SAMBA or NFS), \
digiKam will hang. If you try restarting digiKam, there will be no visual feedback. This is a \
workaround that will allow you to have digiKam store pictures on a network folder.
==Configuration Cleanup==
First, if you've already run digiKam and it has hung (or done nothing) you must do the \
following to clean up the corrupt digiKam configuration:
1. Verify that digiKam is not still running. If it's running, kill it off. (The digiKam process \
may be running even if you don't see digiKam on your desktop. Use the "ps" and "kill" commands \
to verify and kill off the process, or, simply bring up KDE System Guard, find the digiKam \
process, and, kill it.)
2. Delete your digiKam config file, located at: ~/.kde/share/config/digikamrc
3. Go to the folder you specified as the "Albums Library Folder" and delete the two files that \
digiKam created: "digikam3.db" and "digikam3.db-journal".
==The Workaround==
Now you can re-configure digiKam from a fresh start as follows:
1. Start digiKam.
2. When prompted for the "Albums Library Folder", specify a local folder (eg ~/.digiKam).
3. Through Konqueror, navigate to a network folder where you want to store pictures. (I'll \
refer to this as your "network pictures folder".)
4. Create a symlink from the digikam3.db file, which digiKam created in your local "Albums \
Library Folder", to your network pictures folder.
5. In digiKam, go to the "Settings" menu and select "Configure digiKam ...".
6. In the "Configure - digiKam" dialog, select "Albums" and then change the "Album Library \
Path" to your network pictures folder.
==Conclusion==
Now digiKam should save pictures to your network pictures folder and it should save to the \
database on your local drive.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic