[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-bugs-dist
Subject: [Bug 128443] k3b recognizes CD writer only as readonly device
From: Bernd Kuhls <bernd.kuhls () informatik ! uni-oldenburg ! de>
Date: 2006-06-21 16:51:00
Message-ID: 20060621165100.12997.qmail () ktown ! kde ! org
[Download RAW message or body]
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
http://bugs.kde.org/show_bug.cgi?id=128443
------- Additional Comments From bernd.kuhls informatik uni-oldenburg de 2006-06-21 \
18:50 ------- May I join in? I have the same problem but I remember I could once burn \
with k3b but I do not know what has changed since then, now using k3b-0.12.15.
uname: Linux gentoo 2.6.16-gentoo-r10 #1 Fri Jun 16 21:01:59 CEST 2006 i686 AMD \
Athlon(tm) XP 2600+ GNU/Linux, same error with kernel 2.6.17.
scsibus0:
0,0,0 0) 'SEAGATE ' 'ST318438LW ' '0003' Disk
0,1,0 1) 'SEAGATE ' 'ST336938LW ' '0003' Disk
0,2,0 2) 'IOMEGA ' 'ZIP 100 ' 'J.03' Removable Disk
0,3,0 3) 'TEAC ' 'CD-W512SB ' '1.0H' Removable CD-ROM
0,4,0 4) 'TOSHIBA ' 'DVD-ROM SD-M1401' 'X011' Removable CD-ROM
Burner is 0,3,0: Teac CD-W512SB
============================================================================
# cdrecord -v -prcap dev=0,3,0
Cdrecord-ProDVD-Clone 2.01.01a10 (i686-pc-linux-gnu) Copyright (C) 1995-2006 JÃ ¶rg \
Schilling TOC Type: 1 = CD-ROM
scsidev: '0,3,0'
scsibus: 0 target: 3 lun: 0
Linux sg driver version: 3.5.33
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : RELADR SYNC LINKED
Vendor_info : 'TEAC '
Identifikation : 'CD-W512SB '
Revision : '1.0H'
Device seems to be: Generic mmc CD-RW.
Drive capabilities, per MMC page 2A:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does not read DVD-ROM media
Does not read DVD-R media
Does not write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
============================================================================
Using cdrecord directly with an ISO file works without problems:
============================================================================
cdrecord -v blank=fast dev=0,3,0 -tao /mnt/reiser/systemrescuecd-x86-0.2.19.iso
Cdrecord-ProDVD-Clone 2.01.01a10 (i686-pc-linux-gnu) Copyright (C) 1995-2006 JÃ ¶rg \
Schilling TOC Type: 1 = CD-ROM
scsidev: '0,3,0'
scsibus: 0 target: 3 lun: 0
Linux sg driver version: 3.5.33
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : RELADR SYNC LINKED
Vendor_info : 'TEAC '
Identifikation : 'CD-W512SB '
Revision : '1.0H'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 3462144 = 3381 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 120 MB
Total size: 138 MB (13:45.77) = 61933 sectors
Lout start: 139 MB (13:47/58) = 61933 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 3
A1 values: 24 1A BC
A2 values: 26 B2 26
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
cdrecord: Cannot get next writable address for 'invisible' track.
cdrecord: This means that we are checking recorded media.
cdrecord: This media cannot be written in streaming mode anymore.
cdrecord: If you like to write to 'preformatted' RW media, try to blank the media \
first. Starting to write CD/DVD at speed 10 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Blanking PMA, TOC, pregap
Blanking time: 33.704s
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 120 of 120 MB written (fifo 100%) [buf 100%] 10.4x.
Track 01: Total bytes read/written: 126834688/126834688 (61931 sectors).
Writing time: 96.457s
Average write speed 9.4x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 35.334s
cdrecord: fifo had 1998 puts and 1998 gets.
cdrecord: fifo was 0 times empty and 1911 times full, min fill was 95%.
============================================================================
Using k3b with another Firewire attached burner works as well, only
the SCSI burner is not properly recognized.
How to produce the debug messages for k3b?
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic